You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

David Bauer c8115167f9 ath79: add support for devolo WiFi pro 1200i ... Hardware -------- CPU: Qualcomm Atheros QCA9558 RAM: 128M DDR2 FLASH: 16MiB ETH: 1x Atheros AR8035 (PoE in) WiFi2: QCA9558 2T2R WiFi5: QCA9880 2T2R BTN: 1x Reset LED: 1x LED blue 1x LED red BEEP: 1x GPIO attached piezo beeper UART: 3.3V GND TX RX (115200-N-8) (3.3V is square pad) Header is located next to reset-button Installation ------------ Make sure you set a password for the root user as prompted on first setup! 1. Upload OpenWRT sysupgrade image via SSH to the device. Use /tmp as the destination folder on the device. User is root, password the one set in the web interface. 2. Install OpenWRT with > sysupgrade -n -F /tmp/<openwrt-image-name> Signed-off-by: David Bauer <mail@david-bauer.net>		6 years ago
..
base-files	ath79: add support for devolo WiFi pro 1200i	6 years ago
dts	ath79: add support for devolo WiFi pro 1200i	6 years ago
files	…
generic	…
image	ath79: add support for devolo WiFi pro 1200i	6 years ago
nand	…
patches-4.14	…
tiny	…
Makefile	…
config-4.14	…
modules.mk	…