hsist
/
freifunkist-firmware
6
1
Fork 0
Code Issues Pull Requests Releases Wiki Activity
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
45578 Commits
1 Branch
0 Tags
164 MiB
 
 
 
 
 
 
Tag: Branch: Tree: 6b042217d7
Branches Tags
${ item.name }
Create tag ${ searchTerm }
Create branch ${ searchTerm }
from '6b042217d7'
${ noResults }
freifunkist-firmware/package/boot/uboot-kirkwood/patches/010-pogoplug_v4.patch

1526 lines
43 KiB
Raw Blame History

--- a/arch/arm/mach-kirkwood/Kconfig
+++ b/arch/arm/mach-kirkwood/Kconfig
@@ -25,6 +25,9 @@ config TARGET_LSXL
config TARGET_POGO_E02
bool "pogo_e02 Board"
+config TARGET_POGOPLUGV4
+ bool "Pogoplug V4 Board"
+
config TARGET_DNS325
bool "dns325 Board"
@@ -83,6 +86,7 @@ source "board/Marvell/guruplug/Kconfig"
source "board/Marvell/sheevaplug/Kconfig"
source "board/buffalo/lsxl/Kconfig"
source "board/cloudengines/pogo_e02/Kconfig"
+source "board/cloudengines/pogoplugv4/Kconfig"
source "board/d-link/dns325/Kconfig"
source "board/iomega/iconnect/Kconfig"
source "board/keymile/km_arm/Kconfig"
--- a/arch/arm/mach-kirkwood/include/mach/kw88f6192.h
+++ b/arch/arm/mach-kirkwood/include/mach/kw88f6192.h
@@ -15,6 +15,6 @@
#define KW_REGS_PHY_BASE KW88F6192_REGS_PHYS_BASE
/* TCLK Core Clock defination */
-#define CONFIG_SYS_TCLK 166000000 /* 166MHz */
+#define CONFIG_SYS_TCLK 166666667 /* 166MHz */
#endif /* _CONFIG_KW88F6192_H */
--- a/arch/arm/mach-kirkwood/include/mach/mpp.h
+++ b/arch/arm/mach-kirkwood/include/mach/mpp.h
@@ -216,10 +216,12 @@
#define MPP33_GPIO MPP( 33, 0x0, 1, 1, 0, 1, 1, 1 )
#define MPP33_TDM_DTX MPP( 33, 0x2, 0, 1, 0, 0, 1, 1 )
#define MPP33_GE1_13 MPP( 33, 0x3, 0, 0, 0, 1, 1, 1 )
+#define MPP33_SATA1_ACTn MPP( 33, 0x5, 0, 1, 0, 1, 1, 1 )
#define MPP34_GPIO MPP( 34, 0x0, 1, 1, 0, 1, 1, 1 )
#define MPP34_TDM_SPI_CS1 MPP( 34, 0x2, 0, 1, 0, 0, 1, 1 )
#define MPP34_GE1_14 MPP( 34, 0x3, 0, 0, 0, 1, 1, 1 )
+#define MPP34_SATA1_ACTn MPP( 34, 0x5, 0, 1, 0, 1, 1, 1 )
#define MPP35_GPIO MPP( 35, 0x0, 1, 1, 1, 1, 1, 1 )
#define MPP35_TDM_CH0_TX_QL MPP( 35, 0x2, 0, 1, 0, 0, 1, 1 )
--- /dev/null
+++ b/board/cloudengines/pogoplugv4/Kconfig
@@ -0,0 +1,12 @@
+if TARGET_POGOPLUGV4
+
+config SYS_BOARD
+ default "pogoplugv4"
+
+config SYS_VENDOR
+ default "cloudengines"
+
+config SYS_CONFIG_NAME
+ default "pogoplugv4"
+
+endif
--- /dev/null
+++ b/board/cloudengines/pogoplugv4/MAINTAINERS
@@ -0,0 +1,6 @@
+POGOPLUGV4 BOARD
+M: Alberto Bursi <alberto.bursi@outlook.it>
+S: Maintained
+F: board/cloudengines/pogoplugv4/
+F: include/configs/pogoplugv4.h
+F: configs/pogoplugv4_defconfig
--- /dev/null
+++ b/board/cloudengines/pogoplugv4/Makefile
@@ -0,0 +1,11 @@
+#
+# (C) Copyright 2009 bodhi <mibodhi@gmail.com>
+#
+# Based on
+# Marvell Semiconductor <www.marvell.com>
+# Written-by: Prafulla Wadaskar <prafulla@marvell.com>
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+obj-y := pogoplugv4.o
--- /dev/null
+++ b/board/cloudengines/pogoplugv4/kwbimage.cfg
@@ -0,0 +1,167 @@
+#
+# Copyright (C) 2012
+# David Purdy <david.c.purdy@gmail.com>
+#
+# Based on Kirkwood support:
+# (C) Copyright 2009
+# Marvell Semiconductor <www.marvell.com>
+# Written-by: Prafulla Wadaskar <prafulla <at> marvell.com>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; If not, see <http://www.gnu.org/licenses/>.
+#
+# Refer docs/README.kwimage for more details about how-to configure
+# and create kirkwood boot image
+#
+
+# Boot Media configurations (DONE)
+BOOT_FROM nand
+NAND_ECC_MODE default
+NAND_PAGE_SIZE 0x0800
+
+# SOC registers configuration using bootrom header extension
+# Maximum KWBIMAGE_MAX_CONFIG configurations allowed
+
+# Configure RGMII-0 interface pad voltage to 1.8V (SHOULD BE SAME)
+DATA 0xffd100e0 0x1b1b1b9b
+
+#Dram initalization for SINGLE x16 CL=3 @ 200MHz (need CL=3 @ 200MHz?)
+DATA 0xffd01400 0x43000618 # DDR Configuration register
+# bit13-0: 0x200 (200 DDR2 clks refresh rate)
+# bit23-14: zero
+# bit24: 1= enable exit self refresh mode on DDR access
+# bit25: 1 required
+# bit29-26: zero
+# bit31-30: 01
+
+DATA 0xffd01404 0x34143000 # DDR Controller Control Low
+# bit 4: 0=addr/cmd in smame cycle
+# bit 5: 0=clk is driven during self refresh, we don't care for APX
+# bit 6: 0=use recommended falling edge of clk for addr/cmd
+# bit14: 0=input buffer always powered up
+# bit18: 1=cpu lock transaction enabled
+# bit23-20: 3=recommended value for CL=3 and STARTBURST_DEL disabled bit31=0
+# bit27-24: 6= CL+3, STARTBURST sample stages, for freqs 400MHz, unbuffered DIMM
+# bit30-28: 3 required
+# bit31: 0=no additional STARTBURST delay
+
+DATA 0xffd01408 0x11012227 # DDR Timing (Low) (active cycles value +1)
+# bit3-0: TRAS lsbs
+# bit7-4: TRCD
+# bit11- 8: TRP
+# bit15-12: TWR
+# bit19-16: TWTR
+# bit20: TRAS msb
+# bit23-21: 0x0
+# bit27-24: TRRD
+# bit31-28: TRTP
+
+DATA 0xffd0140c 0x00000819 # DDR Timing (High)
+# bit6-0: TRFC
+# bit8-7: TR2R
+# bit10-9: TR2W
+# bit12-11: TW2W
+# bit31-13: zero required
+
+DATA 0xffd01410 0x00000001 # DDR Address Control (changed to Dockstar vals)
+# bit1-0: 00, Cs0width=x16
+# bit3-2: 10, Cs0size=512Mb
+# bit5-4: 00, Cs2width=nonexistent
+# bit7-6: 00, Cs1size =nonexistent
+# bit9-8: 00, Cs2width=nonexistent
+# bit11-10: 00, Cs2size =nonexistent
+# bit13-12: 00, Cs3width=nonexistent
+# bit15-14: 00, Cs3size =nonexistent
+# bit16: 0, Cs0AddrSel
+# bit17: 0, Cs1AddrSel
+# bit18: 0, Cs2AddrSel
+# bit19: 0, Cs3AddrSel
+# bit31-20: 0 required
+
+DATA 0xffd01414 0x00000000 # DDR Open Pages Control
+# bit0: 0, OpenPage enabled
+# bit31-1: 0 required
+
+DATA 0xffd01418 0x00000000 # DDR Operation
+# bit3-0: 0x0, DDR cmd
+# bit31-4: 0 required
+
+DATA 0xffd0141c 0x00000632 # DDR Mode
+# bit2-0: 2, BurstLen=2 required
+# bit3: 0, BurstType=0 required
+# bit6-4: 4, CL=5 (<===== change to CL=3 ?)
+# bit7: 0, TestMode=0 normal
+# bit8: 0, DLL reset=0 normal
+# bit11-9: 6, auto-precharge write recovery ????????????
+# bit12: 0, PD must be zero
+# bit31-13: 0 required
+
+DATA 0xffd01420 0x00000040 # DDR Extended Mode
+# bit0: 0, DDR DLL enabled
+# bit1: 0, DDR drive strenght normal
+# bit2: 0, DDR ODT control lsd (disabled)
+# bit5-3: 000, required
+# bit6: 1, DDR ODT control msb, (disabled)
+# bit9-7: 000, required
+# bit10: 0, differential DQS enabled
+# bit11: 0, required
+# bit12: 0, DDR output buffer enabled
+# bit31-13: 0 required
+
+DATA 0xffd01424 0x0000F07F # DDR Controller Control High
+# bit2-0: 111, required
+# bit3 : 1 , MBUS Burst Chop disabled
+# bit6-4: 111, required
+# bit7 : 0
+# bit8 : 0 , no sample stage
+# bit9 : 0 , no half clock cycle addition to dataout
+# bit10 : 0 , 1/4 clock cycle skew enabled for addr/ctl signals
+# bit11 : 0 , 1/4 clock cycle skew disabled for write mesh
+# bit15-12: 1111 required
+# bit31-16: 0 required
+
+DATA 0xffd01428 0x00085520 # DDR2 ODT Read Timing (default values)
+DATA 0xffd0147c 0x00008552 # DDR2 ODT Write Timing (default values)
+
+DATA 0xFFD01500 0x00000000 # CS[0]n Base address to 0x0
+DATA 0xFFD01504 0x07FFFFF1 # CS[0]n Size
+# bit0: 1, Window enabled
+# bit1: 0, Write Protect disabled
+# bit3-2: 00, CS0 hit selected
+# bit23-4: ones, required
+# bit31-24: 0x07, Size (i.e. 128MB)
+
+DATA 0xFFD0150C 0x00000000 # CS[1]n Size, window disabled
+DATA 0xFFD01514 0x00000000 # CS[2]n Size, window disabled
+DATA 0xFFD0151C 0x00000000 # CS[3]n Size, window disabled
+
+DATA 0xffd01494 0x00030000 # DDR ODT Control (Low) (DONE)
+# bit3-0: 2, ODT0Rd, MODT[0] asserted during read from DRAM CS1
+# bit7-4: 1, ODT0Rd, MODT[0] asserted during read from DRAM CS0
+# bit19-16:2, ODT0Wr, MODT[0] asserted during write to DRAM CS1
+# bit23-20:1, ODT0Wr, MODT[0] asserted during write to DRAM CS0
+
+DATA 0xffd01498 0x00000000 # DDR ODT Control (High) (DONE)
+# bit1-0: 00, ODT0 controlled by ODT Control (low) register above
+# bit3-2: 01, ODT1 active NEVER!
+# bit31-4: zero, required
+
+DATA 0xffd0149c 0x0000e803 # CPU ODT Control (DONE)
+DATA 0xffd01480 0x00000001 # DDR Initialization Control (DONE)
+#bit0=1, enable DDR init upon this register write
+
+# End of Header extension
+DATA 0x0 0x0
--- /dev/null
+++ b/board/cloudengines/pogoplugv4/pogoplugv4.c
@@ -0,0 +1,223 @@
+/*
+ * Copyright (C) 2016 bodhi <mibodhi@gmail.com>
+ * Copyright (C) 2014 bodhi <mibodhi@gmail.com>
+ *
+ * Based on
+ *
+ * Copyright (C) 2014 <ebbes.ebbes@gmail.com>
+ *
+ * Copyright (C) 2012
+ * David Purdy <david.c.purdy@gmail.com>
+ *
+ * Based on Kirkwood support:
+ * (C) Copyright 2009
+ * Marvell Semiconductor <www.marvell.com>
+ * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <common.h>
+#include <miiphy.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/soc.h>
+#include <asm/arch/mpp.h>
+#include <asm/io.h>
+#include "pogoplugv4.h"
+#include <asm/arch/gpio.h>
+
+#ifdef CONFIG_KIRKWOOD_MMC
+#include <kirkwood_mmc.h>
+#endif /* CONFIG_KIRKWOOD_MMC */
+
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int board_early_init_f(void)
+{
+ /*
+ * default gpio configuration
+ * There are maximum 64 gpios controlled through 2 sets of registers
+ * the below configuration configures mainly initial LED status
+ */
+ mvebu_config_gpio(POGOPLUGV4_OE_VAL_LOW,
+ POGOPLUGV4_OE_VAL_HIGH,
+ POGOPLUGV4_OE_LOW, POGOPLUGV4_OE_HIGH);
+
+ /* Multi-Purpose Pins Functionality configuration */
+ u32 kwmpp_config[] = {
+ MPP0_NF_IO2,
+ MPP1_NF_IO3,
+ MPP2_NF_IO4,
+ MPP3_NF_IO5,
+ MPP4_NF_IO6,
+ MPP5_NF_IO7,
+ MPP6_SYSRST_OUTn,
+ MPP7_GPO,
+ MPP8_TW_SDA,
+ MPP9_TW_SCK,
+ MPP10_UART0_TXD,
+ MPP11_UART0_RXD,
+ MPP12_SD_CLK,
+ MPP13_SD_CMD,
+ MPP14_SD_D0,
+ MPP15_SD_D1,
+ MPP16_SD_D2,
+ MPP17_SD_D3,
+ MPP18_NF_IO0,
+ MPP19_NF_IO1,
+ MPP20_SATA1_ACTn,
+ MPP21_SATA0_ACTn,
+ MPP22_GPIO, /* Green LED */
+ MPP23_GPIO,
+ MPP24_GPIO, /* Red LED */
+ MPP25_GPIO,
+ MPP26_GPIO,
+ MPP27_GPIO,
+ MPP28_GPIO,
+ MPP29_GPIO, /* Eject button */
+ MPP30_GPIO,
+ MPP31_GPIO,
+ MPP32_GPIO,
+ MPP33_GPIO,
+ MPP34_GPIO,
+ MPP35_GPIO, /* FR6192 has only 36 GPIOs */
+ 0
+ };
+ kirkwood_mpp_conf(kwmpp_config, NULL);
+
+ return 0;
+}
+
+int board_init(void)
+{
+ /* Boot parameters address */
+ gd->bd->bi_boot_params = mvebu_sdram_bar(0) + 0x100;
+
+ kw_gpio_set_valid(20, 1);
+ kw_gpio_set_valid(21, 1);
+ kw_gpio_set_valid(22, 1);
+ kw_gpio_set_valid(24, 1);
+
+ return 0;
+}
+
+#ifdef CONFIG_RESET_PHY_R
+/* Configure and initialize PHY */
+void reset_phy(void)
+{
+ u16 reg;
+ u16 devadr;
+ char *name = "egiga0";
+
+ if (miiphy_set_current_dev(name))
+ return;
+
+ /* command to read PHY dev address */
+ if (miiphy_read(name, 0xEE, 0xEE, (u16 *) &devadr)) {
+ printf("Err..(%s) could not read PHY dev address\n", __func__);
+ return;
+ }
+
+ /*
+ * Enable RGMII delay on Tx and Rx for CPU port
+ * Ref: sec 4.7.2 of chip datasheet
+ */
+ miiphy_write(name, devadr, MV88E1116_PGADR_REG, 2);
+ miiphy_read(name, devadr, MV88E1116_MAC_CTRL_REG, &reg);
+ reg |= (MV88E1116_RGMII_RXTM_CTRL | MV88E1116_RGMII_TXTM_CTRL);
+ miiphy_write(name, devadr, MV88E1116_MAC_CTRL_REG, reg);
+ miiphy_write(name, devadr, MV88E1116_PGADR_REG, 0);
+
+ /* reset the phy */
+ miiphy_reset(name, devadr);
+
+ debug("88E1116 Initialized on %s\n", name);
+}
+#endif /* CONFIG_RESET_PHY_R */
+
+#ifdef CONFIG_KIRKWOOD_MMC
+int board_mmc_init(bd_t *bis)
+{
+ kw_mmc_initialize(bis);
+ return 0;
+}
+#endif /* CONFIG_KIRKWOOD_MMC */
+
+
+#define GREEN_LED (1 << 22)
+#define RED_LED (1 << 24)
+#define BOTH_LEDS (GREEN_LED | RED_LED)
+#define NEITHER_LED 0
+
+static void set_leds(u32 leds, u32 blinking)
+{
+ struct kwgpio_registers *r;
+ u32 oe;
+ u32 bl;
+
+ r = (struct kwgpio_registers *)MVEBU_GPIO0_BASE;
+ oe = readl(&r->oe) | BOTH_LEDS;
+ writel(oe & ~leds, &r->oe); /* active low */
+ bl = readl(&r->blink_en) & ~BOTH_LEDS;
+ writel(bl | blinking, &r->blink_en);
+}
+
+void show_boot_progress(int val)
+{
+ switch (val) {
+ case BOOTSTAGE_ID_RUN_OS: /* booting Linux */
+ set_leds(BOTH_LEDS, NEITHER_LED);
+ break;
+ case BOOTSTAGE_ID_NET_ETH_START: /* Ethernet initialization */
+ set_leds(GREEN_LED, GREEN_LED);
+ break;
+ default:
+ if (val < 0) /* error */
+ set_leds(RED_LED, RED_LED);
+ break;
+ }
+}
+
+#if defined(CONFIG_KIRKWOOD_GPIO)
+/* Return GPIO button status */
+/*
+un-pressed:
+ gpio-29 (Eject Button ) in hi (act lo) - IRQ edge (clear )
+pressed
+ gpio-29 (Eject Button ) in lo (act hi) - IRQ edge (clear )
+*/
+
+static int
+do_read_button(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+{
+ if (strcmp(argv[1], "eject") == 0) {
+ kw_gpio_set_valid(BTN_EJECT, GPIO_INPUT_OK);
+ kw_gpio_direction_input(BTN_EJECT);
+ return kw_gpio_get_value(BTN_EJECT);
+ }
+ else
+ return -1;
+}
+
+
+U_BOOT_CMD(button, 2, 0, do_read_button,
+ "Return GPIO button status 0=off 1=on",
+ "- button eject: test buttons states\n"
+);
+
+#endif
--- /dev/null
+++ b/board/cloudengines/pogoplugv4/pogoplugv4.h
@@ -0,0 +1,50 @@
+/*
+ * Copyright (C) 2016
+ * bodhi <mibodhi@gmail.com>
+ *
+ * Copyright (C) 2012
+ * David Purdy <david.c.purdy@gmail.com>
+ *
+ * Based on Kirkwood support:
+ * (C) Copyright 2009
+ * Marvell Semiconductor <www.marvell.com>
+ * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef __POGOPLUGV4_H
+#define __POGOPLUGV4_H
+
+/* GPIO configuration */
+#define POGOPLUGV4_OE_LOW (~(0))
+#define POGOPLUGV4_OE_HIGH (~(0))
+#define POGOPLUGV4_OE_VAL_LOW (1 << 29)
+#define POGOPLUGV4_OE_VAL_HIGH 0
+
+/* PHY related */
+#define MV88E1116_LED_FCTRL_REG 10
+#define MV88E1116_CPRSP_CR3_REG 21
+#define MV88E1116_MAC_CTRL_REG 21
+#define MV88E1116_PGADR_REG 22
+#define MV88E1116_RGMII_TXTM_CTRL (1 << 4)
+#define MV88E1116_RGMII_RXTM_CTRL (1 << 5)
+
+/* button */
+#define BTN_EJECT 29
+
+#endif /* __POGOPLUGV4_H */
--- /dev/null
+++ b/configs/pogoplugv4_defconfig
@@ -0,0 +1,43 @@
+CONFIG_ARM=y
+CONFIG_KIRKWOOD=y
+CONFIG_SYS_TEXT_BASE=0x600000
+CONFIG_TARGET_POGOPLUGV4=y
+CONFIG_SYS_PROMPT="pogoplugv4> "
+CONFIG_IDENT_STRING="\nPogoplug V4"
+CONFIG_NR_DRAM_BANKS=2
+CONFIG_BOOTDELAY=3
+# CONFIG_CMD_IMLS is not set
+# CONFIG_CMD_FLASH is not set
+CONFIG_MVGBE=y
+CONFIG_MII=y
+CONFIG_SYS_NS16550=y
+CONFIG_CMD_FDT=y
+CONFIG_OF_LIBFDT=y
+CONFIG_OF_BOOTZ=y
+CONFIG_CMD_SETEXPR=y
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_MII=y
+CONFIG_CMD_PING=y
+CONFIG_CMD_DNS=y
+CONFIG_CMD_SNTP=y
+CONFIG_CMD_USB=y
+CONFIG_CMD_DATE=y
+CONFIG_CMD_EXT2=y
+CONFIG_CMD_EXT4=y
+CONFIG_CMD_FAT=y
+CONFIG_CMD_JFFS2=y
+CONFIG_MTDPARTS_DEFAULT="mtdparts=orion_nand:0x1c0000(uboot),0x40000(uboot_env),0x7e00000(ubi)"
+CONFIG_CMD_MTDPARTS=y
+CONFIG_CMD_ENV=y
+CONFIG_CMD_NAND=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_GPIO=y
+CONFIG_EFI_PARTITION=y
+CONFIG_ENV_IS_IN_NAND=y
+CONFIG_CMD_UBI=y
+CONFIG_USB=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_STORAGE=y
+CONFIG_LZMA=y
+CONFIG_LZO=y
+CONFIG_SYS_LONGHELP=y
--- a/drivers/gpio/kw_gpio.c
+++ b/drivers/gpio/kw_gpio.c
@@ -147,3 +147,36 @@ void kw_gpio_set_blink(unsigned pin, int
/* Set blinking. */
__set_blinking(pin, blink);
}
+
+
+/*
+ * Hooks to GENERIC_GPIO primitives
+ */
+
+int gpio_direction_input(unsigned pin)
+{
+ return kw_gpio_direction_input(pin);
+}
+
+int gpio_direction_output(unsigned pin, int value)
+{
+ return kw_gpio_direction_output(pin, value);
+}
+
+void gpio_set_value(unsigned pin, int value) {
+ kw_gpio_set_value(pin, value);
+}
+
+int gpio_get_value(unsigned pin) {
+ return kw_gpio_get_value(pin);
+}
+
+int gpio_request(unsigned gpio, const char *label)
+{
+ return 0;
+}
+
+int gpio_free(unsigned gpio)
+{
+ return 0;
+}
--- a/drivers/mmc/Makefile
+++ b/drivers/mmc/Makefile
@@ -61,6 +61,7 @@ obj-$(CONFIG_MMC_SDHCI_TANGIER) += tang
obj-$(CONFIG_MMC_SDHCI_TEGRA) += tegra_mmc.o
obj-$(CONFIG_MMC_SDHCI_XENON) += xenon_sdhci.o
obj-$(CONFIG_MMC_SDHCI_ZYNQ) += zynq_sdhci.o
+obj-$(CONFIG_KIRKWOOD_MMC) += kirkwood_mmc.o
obj-$(CONFIG_MMC_SUNXI) += sunxi_mmc.o
obj-$(CONFIG_MMC_UNIPHIER) += tmio-common.o uniphier-sd.o
--- /dev/null
+++ b/drivers/mmc/kirkwood_mmc.c
@@ -0,0 +1,482 @@
+/*
+ * (C) Copyright 2014 bodhi <mibodhi@gmail.com>
+ *
+ * Based on
+ *
+ * (C) Copyright 2014 <ebbes.ebbes@gmail.com>
+ *
+ * Based on
+ *
+ * Driver for Marvell SDIO/MMC controller
+ *
+ * (C) Copyright 2012
+ * Marvell Semiconductor <www.marvell.com>
+ * Written-by: Gérald Kerma <uboot at doukki.net>
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <malloc.h>
+#include <part.h>
+#include <mmc.h>
+#include <asm/io.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/soc.h>
+
+#include <kirkwood_mmc.h>
+
+#define DRIVER_NAME "kwsdio"
+
+static int kw_mmc_setup_data(struct mmc_data *data)
+{
+ u32 ctrl_reg;
+
+#ifdef DEBUG
+ printf("%s, data %s : blocks=%d blksz=%d\n", DRIVER_NAME,
+ (data->flags & MMC_DATA_READ) ? "read" : "write",
+ data->blocks, data->blocksize);
+#endif
+
+ /* default to maximum timeout */
+ ctrl_reg = kwsd_read(SDIO_HOST_CTRL);
+ ctrl_reg |= SDIO_HOST_CTRL_TMOUT(SDIO_HOST_CTRL_TMOUT_MAX);
+ kwsd_write(SDIO_HOST_CTRL, ctrl_reg);
+
+ if (data->flags & MMC_DATA_READ) {
+ kwsd_write(SDIO_SYS_ADDR_LOW,(u32)data->dest & 0xffff);
+ kwsd_write(SDIO_SYS_ADDR_HI,(u32)data->dest >> 16);
+ } else {
+ kwsd_write(SDIO_SYS_ADDR_LOW,(u32)data->src & 0xffff);
+ kwsd_write(SDIO_SYS_ADDR_HI,(u32)data->src >> 16);
+ }
+
+ kwsd_write(SDIO_BLK_COUNT, data->blocks);
+ kwsd_write(SDIO_BLK_SIZE, data->blocksize);
+
+ return 0;
+}
+
+static int kw_mmc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, struct mmc_data *data)
+{
+ int timeout = 10;
+ int err;
+ ushort waittype = 0;
+ ushort resptype = 0;
+ ushort xfertype = 0;
+ ushort resp_indx = 0;
+
+#ifdef CONFIG_MMC_DEBUG
+ printf("cmdidx [0x%x] resp_type[0x%x] cmdarg[0x%x]\n", cmd->cmdidx, cmd->resp_type, cmd->cmdarg);
+#endif
+
+ udelay(10000);
+
+#ifdef CONFIG_MMC_DEBUG
+ printf("%s: cmd %d (hw state 0x%04x)\n", DRIVER_NAME, cmd->cmdidx, kwsd_read(SDIO_HW_STATE));
+#endif
+
+ /* Checking if card is busy */
+ while ((kwsd_read(SDIO_HW_STATE) & CARD_BUSY)) {
+ if (timeout == 0) {
+ printf("%s: card busy!\n", DRIVER_NAME);
+ return -1;
+ }
+ timeout--;
+ udelay(1000);
+ }
+
+ /* Set up for a data transfer if we have one */
+ if (data) {
+ if ((err = kw_mmc_setup_data(data)))
+ return err;
+ }
+
+ resptype = SDIO_CMD_INDEX(cmd->cmdidx);
+
+ /* Analyzing resptype/xfertype/waittype for the command */
+ if (cmd->resp_type & MMC_RSP_BUSY)
+ resptype |= SDIO_CMD_RSP_48BUSY;
+ else if (cmd->resp_type & MMC_RSP_136)
+ resptype |= SDIO_CMD_RSP_136;
+ else if (cmd->resp_type & MMC_RSP_PRESENT)
+ resptype |= SDIO_CMD_RSP_48;
+ else
+ resptype |= SDIO_CMD_RSP_NONE;
+
+ if (cmd->resp_type & MMC_RSP_CRC)
+ resptype |= SDIO_CMD_CHECK_CMDCRC;
+
+ if (cmd->resp_type & MMC_RSP_OPCODE)
+ resptype |= SDIO_CMD_INDX_CHECK;
+
+ if (cmd->resp_type & MMC_RSP_PRESENT) {
+ resptype |= SDIO_UNEXPECTED_RESP;
+ waittype |= SDIO_NOR_UNEXP_RSP;
+ }
+
+ if (data) {
+ resptype |= SDIO_CMD_DATA_PRESENT | SDIO_CMD_CHECK_DATACRC16;
+ xfertype |= SDIO_XFER_MODE_HW_WR_DATA_EN;
+ if (data->flags & MMC_DATA_READ) {
+ xfertype |= SDIO_XFER_MODE_TO_HOST;
+ waittype = SDIO_NOR_DMA_INI;
+ } else
+ waittype |= SDIO_NOR_XFER_DONE;
+ } else
+ waittype |= SDIO_NOR_CMD_DONE;
+
+ /* Setting cmd arguments */
+ kwsd_write(SDIO_ARG_LOW, cmd->cmdarg & 0xffff);
+ kwsd_write(SDIO_ARG_HI, cmd->cmdarg >> 16);
+
+ /* Setting Xfer mode */
+ kwsd_write(SDIO_XFER_MODE, xfertype);
+
+ kwsd_write(SDIO_NOR_INTR_STATUS, ~SDIO_NOR_CARD_INT);
+ kwsd_write(SDIO_ERR_INTR_STATUS, SDIO_POLL_MASK);
+
+ /* Sending command */
+ kwsd_write(SDIO_CMD, resptype);
+/*
+ kwsd_write(SDIO_CMD, KW_MMC_MAKE_CMD(cmd->cmdidx, resptype));
+*/
+
+ kwsd_write(SDIO_NOR_INTR_EN, SDIO_POLL_MASK);
+ kwsd_write(SDIO_ERR_INTR_EN, SDIO_POLL_MASK);
+
+ /* Waiting for completion */
+ timeout = 1000000;
+
+ while (!((kwsd_read(SDIO_NOR_INTR_STATUS)) & waittype)) {
+ if (kwsd_read(SDIO_NOR_INTR_STATUS) & SDIO_NOR_ERROR) {
+#ifdef DEBUG
+ printf("%s: kw_mmc_send_cmd: error! cmdidx : %d, err reg: %04x\n", DRIVER_NAME, cmd->cmdidx,
+wsd_read(SDIO_ERR_INTR_STATUS));
+#endif
+ if (kwsd_read(SDIO_ERR_INTR_STATUS) & (SDIO_ERR_CMD_TIMEOUT | SDIO_ERR_DATA_TIMEOUT)) {
+ return -ETIMEDOUT;
+ }
+ return -ECOMM;
+ }
+
+ timeout--;
+ udelay(1);
+ if (timeout <= 0) {
+ printf("%s: command timed out\n", DRIVER_NAME);
+ return -ETIMEDOUT;
+ }
+ }
+
+ /* Handling response */
+ if (cmd->resp_type & MMC_RSP_136) {
+ uint response[8];
+ for (resp_indx = 0; resp_indx < 8; resp_indx++)
+ response[resp_indx] = kwsd_read(SDIO_RSP(resp_indx));
+
+ cmd->response[0] = ((response[0] & 0x03ff) << 22) |
+ ((response[1] & 0xffff) << 6) |
+ ((response[2] & 0xfc00) >> 10);
+ cmd->response[1] = ((response[2] & 0x03ff) << 22) |
+ ((response[3] & 0xffff) << 6) |
+ ((response[4] & 0xfc00) >> 10);
+ cmd->response[2] = ((response[4] & 0x03ff) << 22) |
+ ((response[5] & 0xffff) << 6) |
+ ((response[6] & 0xfc00) >> 10);
+ cmd->response[3] = ((response[6] & 0x03ff) << 22) |
+ ((response[7] & 0x3fff) << 8);
+ } else if (cmd->resp_type & MMC_RSP_PRESENT) {
+ uint response[3];
+ for (resp_indx = 0; resp_indx < 3; resp_indx++)
+ response[resp_indx] = kwsd_read(SDIO_RSP(resp_indx));
+
+ cmd->response[0] = ((response[2] & 0x003f) << (8 - 8)) |
+ ((response[1] & 0xffff) << (14 - 8)) |
+ ((response[0] & 0x03ff) << (30 - 8));
+ cmd->response[1] = ((response[0] & 0xfc00) >> 10);
+ cmd->response[2] = 0;
+ cmd->response[3] = 0;
+ }
+
+#ifdef CONFIG_MMC_DEBUG
+ printf("%s: resp[0x%x] ", DRIVER_NAME, cmd->resp_type);
+ printf("[0x%x] ", cmd->response[0]);
+ printf("[0x%x] ", cmd->response[1]);
+ printf("[0x%x] ", cmd->response[2]);
+ printf("[0x%x] ", cmd->response[3]);
+ printf("\n");
+#endif
+
+ return 0;
+}
+
+#if 0
+/* Disable these three functions as they are not used anyway */
+
+static void kwsd_power_up(void)
+{
+#ifdef DEBUG
+ printf("%s: power up\n", DRIVER_NAME);
+#endif
+ /* disable interrupts */
+ kwsd_write(SDIO_NOR_INTR_EN, 0);
+ kwsd_write(SDIO_ERR_INTR_EN, 0);
+
+ /* SW reset */
+ kwsd_write(SDIO_SW_RESET, SDIO_SW_RESET_NOW);
+
+ kwsd_write(SDIO_XFER_MODE, 0);
+
+ /* enable status */
+ kwsd_write(SDIO_NOR_STATUS_EN, SDIO_POLL_MASK);
+ kwsd_write(SDIO_ERR_STATUS_EN, SDIO_POLL_MASK);
+
+ /* enable interrupts status */
+ kwsd_write(SDIO_NOR_INTR_STATUS, SDIO_POLL_MASK);
+ kwsd_write(SDIO_ERR_INTR_STATUS, SDIO_POLL_MASK);
+}
+
+static void kwsd_power_down(void)
+{
+#ifdef DEBUG
+ printf("%s: power down\n", DRIVER_NAME);
+#endif
+ /* disable interrupts */
+ kwsd_write(SDIO_NOR_INTR_EN, 0);
+ kwsd_write(SDIO_ERR_INTR_EN, 0);
+
+ /* SW reset */
+ kwsd_write(SDIO_SW_RESET, SDIO_SW_RESET_NOW);
+
+ kwsd_write(SDIO_XFER_MODE, SDIO_XFER_MODE_STOP_CLK);
+
+ /* disable status */
+ kwsd_write(SDIO_NOR_STATUS_EN, 0);
+ kwsd_write(SDIO_ERR_STATUS_EN, 0);
+
+ /* enable interrupts status */
+ kwsd_write(SDIO_NOR_INTR_STATUS, SDIO_POLL_MASK);
+ kwsd_write(SDIO_ERR_INTR_STATUS, SDIO_POLL_MASK);
+}
+
+static u32 kw_mmc_get_base_clock(void)
+{
+ /* Original version did a check for board device id and revision id
+ * and assigned one of these clocks:
+ * KW_MMC_BASE_FAST_CLK_100 (revid == 0 && devid != MV88F6282_DEV_ID)
+ * KW_MMC_BASE_FAST_CLK_200 (revid != 0 || devid == MV88F6282_DEV_ID)
+ * However, this check was disabled and
+ * KW_MMC_BASE_FAST_CLOCK
+ * was returned in every case.
+ * Therefore, all of the dead logic was removed. */
+ return KW_MMC_BASE_FAST_CLOCK;
+}
+#endif /* #if 0 */
+
+static inline u32 kw_mmc_get_base_clock(void)
+{
+ /* get MMC base clock. If any logic other than just returning
+ * a fixed value is ever used, remove inline modifier. */
+
+ /* Possible values:
+ * - KW_MMC_BASE_FAST_CLOCK (166 MHz)
+ * - KW_MMC_BASE_FAST_CLK_100 (100 MHz)
+ * - KW_MMC_BASE_FAST_CLK_200 (200 MHz)
+ *
+ * Tests have shown that 200 MHz is more reliable than
+ * 166 MHz, so this value is used. */
+ return KW_MMC_BASE_FAST_CLK_200;
+}
+
+static void kw_mmc_set_clk(unsigned int clock)
+{
+ unsigned int m;
+
+ if (clock == 0) {
+#ifdef DEBUG
+ printf("%s: clock off\n", DRIVER_NAME);
+#endif
+ kwsd_write(SDIO_XFER_MODE, SDIO_XFER_MODE_STOP_CLK);
+ kwsd_write(SDIO_CLK_DIV, KW_MMC_BASE_DIV_MAX);
+ } else {
+ m = kw_mmc_get_base_clock() / (2 * clock) - 1;
+ if (m > KW_MMC_BASE_DIV_MAX)
+ m = KW_MMC_BASE_DIV_MAX;
+#ifdef DEBUG
+ printf("%s: kw_mmc_set_clk: base = %d dividor = 0x%x clock=%d\n", DRIVER_NAME,
+w_mmc_get_base_clock(), m, clock);
+#endif
+ kwsd_write(SDIO_CLK_DIV, m & KW_MMC_BASE_DIV_MAX);
+ }
+ udelay(10000);
+}
+
+static void kw_mmc_set_bus(unsigned int bus)
+{
+ u32 ctrl_reg = 0;
+
+ ctrl_reg = kwsd_read(SDIO_HOST_CTRL);
+ ctrl_reg &= ~SDIO_HOST_CTRL_DATA_WIDTH_4_BITS;
+
+ switch (bus) {
+ case 4:
+ ctrl_reg |= SDIO_HOST_CTRL_DATA_WIDTH_4_BITS;
+ break;
+ case 1:
+ default:
+ ctrl_reg |= SDIO_HOST_CTRL_DATA_WIDTH_1_BIT;
+ }
+ /* default transfer mode */
+ ctrl_reg |= SDIO_HOST_CTRL_BIG_ENDIAN;
+ ctrl_reg &= ~SDIO_HOST_CTRL_LSB_FIRST;
+
+ /* default to maximum timeout */
+ ctrl_reg |= SDIO_HOST_CTRL_TMOUT(SDIO_HOST_CTRL_TMOUT_MAX);
+
+ ctrl_reg |= SDIO_HOST_CTRL_PUSH_PULL_EN;
+
+ ctrl_reg |= SDIO_HOST_CTRL_CARD_TYPE_MEM_ONLY;
+
+ /*
+ * The HI_SPEED_EN bit is causing trouble with many (but not all)
+ * high speed SD, SDHC and SDIO cards. Not enabling that bit
+ * makes all cards work. So let's just ignore that bit for now
+ * and revisit this issue if problems for not enabling this bit
+ * are ever reported.
+ */
+#if 0
+ if (ios->timing == MMC_TIMING_MMC_HS ||
+ ios->timing == MMC_TIMING_SD_HS)
+ ctrl_reg |= SDIO_HOST_CTRL_HI_SPEED_EN;
+#endif
+
+#ifdef DEBUG
+ printf("%s: ctrl 0x%04x: %s %s %s\n", DRIVER_NAME, ctrl_reg,
+ (ctrl_reg & SDIO_HOST_CTRL_PUSH_PULL_EN) ?
+ "push-pull" : "open-drain",
+ (ctrl_reg & SDIO_HOST_CTRL_DATA_WIDTH_4_BITS) ?
+ "4bit-width" : "1bit-width",
+ (ctrl_reg & SDIO_HOST_CTRL_HI_SPEED_EN) ?
+ "high-speed" : "");
+#endif
+
+ kwsd_write(SDIO_HOST_CTRL, ctrl_reg);
+ udelay(10000);
+}
+
+static void kw_mmc_set_ios(struct mmc *mmc)
+{
+#ifdef DEBUG
+ printf("%s: bus[%d] clock[%d]\n", DRIVER_NAME, mmc->bus_width, mmc->clock);
+#endif
+ kw_mmc_set_bus(mmc->bus_width);
+ kw_mmc_set_clk(mmc->clock);
+}
+
+static int kw_mmc_init(struct mmc *mmc)
+{
+#ifdef DEBUG
+ printf("%s: kw_mmc_init\n", DRIVER_NAME);
+#endif
+
+ /*
+ * Setting host parameters
+ * Initial Host Ctrl : Timeout : max , Normal Speed mode, 4-bit data mode
+ * Big Endian, SD memory Card, Push_pull CMD Line
+ */
+ kwsd_write(SDIO_HOST_CTRL,
+ SDIO_HOST_CTRL_TMOUT(SDIO_HOST_CTRL_TMOUT_MAX) |
+ SDIO_HOST_CTRL_DATA_WIDTH_4_BITS |
+ SDIO_HOST_CTRL_BIG_ENDIAN |
+ SDIO_HOST_CTRL_PUSH_PULL_EN |
+ SDIO_HOST_CTRL_CARD_TYPE_MEM_ONLY);
+
+ kwsd_write(SDIO_CLK_CTRL, 0);
+
+ /* enable status */
+ kwsd_write(SDIO_NOR_STATUS_EN, SDIO_POLL_MASK);
+ kwsd_write(SDIO_ERR_STATUS_EN, SDIO_POLL_MASK);
+
+ /* disable interrupts */
+ kwsd_write(SDIO_NOR_INTR_EN, 0);
+ kwsd_write(SDIO_ERR_INTR_EN, 0);
+
+ /* SW reset */
+ kwsd_write(SDIO_SW_RESET, SDIO_SW_RESET_NOW);
+
+ udelay(10000);
+ return 0;
+}
+
+int kw_mmc_initialize(bd_t *bis)
+{
+ struct mmc *mmc = NULL;
+ struct mmc_config *cfg = NULL;
+ struct mmc_ops *ops = NULL;
+ char *name = NULL;
+
+#ifdef DEBUG
+ printf("%s: %s base_clock = %d\n", DRIVER_NAME, kirkwood_id(), kw_mmc_get_base_clock());
+#endif
+ mmc = malloc(sizeof(struct mmc));
+ if (!mmc)
+ return -1;
+ memset(mmc, 0, sizeof(*mmc));
+
+ cfg = malloc(sizeof(*cfg));
+ if (cfg == NULL)
+ return -1;
+ memset(cfg, 0, sizeof(*cfg));
+ mmc->cfg = cfg; /* provided configuration */
+
+ ops = malloc(sizeof(*ops));
+ if (ops == NULL)
+ return -1;
+ memset(ops, 0, sizeof(*ops));
+ cfg->ops = ops;
+
+ name = malloc(sizeof(DRIVER_NAME)+1);
+ if (name == NULL)
+ return -1;
+ cfg->name = name;
+
+ sprintf(cfg->name, DRIVER_NAME);
+
+ ops->send_cmd = kw_mmc_send_cmd;
+ ops->set_ios = kw_mmc_set_ios;
+ ops->init = kw_mmc_init;
+
+ cfg->voltages = MMC_VDD_32_33 | MMC_VDD_33_34;
+ cfg->host_caps = MMC_MODE_4BIT | MMC_MODE_HS;
+
+ cfg->f_min = kw_mmc_get_base_clock()/KW_MMC_BASE_DIV_MAX;
+ cfg->f_max = KW_MMC_CLOCKRATE_MAX;
+ cfg->b_max = CONFIG_SYS_MMC_MAX_BLK_COUNT;
+
+ mmc = mmc_create (cfg, NULL);
+
+ if (mmc == NULL) {
+ free(name);
+ free(ops);
+ free(cfg);
+ printf("\nFailed to Initialize MMC\n");
+ return -1;
+ }
+
+ return 0;
+}
--- a/include/configs/mv-common.h
+++ b/include/configs/mv-common.h
@@ -77,4 +77,10 @@
#define CONFIG_SYS_MAX_NAND_DEVICE 1
#endif
+/*
+ * Kirkwood MMC
+ */
+#if defined(CONFIG_KIRKWOOD) && defined(CONFIG_CMD_MMC)
+#define CONFIG_SYS_MMC_BASE KW_SDIO_BASE
+#endif /* defined(CONFIG_KIRKWOOD) && defined(CONFIG_CMD_MMC) */
#endif /* _MV_COMMON_H */
--- /dev/null
+++ b/include/configs/pogoplugv4.h
@@ -0,0 +1,127 @@
+/*
+ * Copyright (C) 2014-2016 bodhi <mibodhi@gmail.com>
+ * Based on
+ *
+ * Copyright (C) 2012
+ * David Purdy <david.c.purdy@gmail.com>
+ *
+ * Based on Kirkwood support:
+ * (C) Copyright 2009
+ * Marvell Semiconductor <www.marvell.com>
+ * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef _CONFIG_POGOPLUGV4_H
+#define _CONFIG_POGOPLUGV4_H
+
+/*
+ * Machine type definition and ID
+ */
+#define MACH_TYPE_POGOPLUGV4 3960
+#define CONFIG_MACH_TYPE MACH_TYPE_POGOPLUGV4
+
+/*
+ * High Level Configuration Options (easy to change)
+ */
+#define CONFIG_FEROCEON_88FR131 /* #define CPU Core subversion */
+#define CONFIG_KW88F6192 /* SOC Name */
+#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
+
+#define CONFIG_FEATURE_COMMAND_EDITING
+#define CONFIG_SYS_64BIT_LBA
+
+/*
+ * Commands configuration
+ */
+
+#define CONFIG_KIRKWOOD_GPIO
+#define CONFIG_PREBOOT
+
+/*
+ * mv-common.h should be defined after CMD configs since it used them
+ * to enable certain macros
+ */
+#include "mv-common.h"
+
+/*
+ * Environment variables configurations
+ */
+#ifdef CONFIG_CMD_NAND
+
+#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K */
+
+
+#endif
+
+#define CONFIG_ENV_SIZE 0x20000 /* 128k */
+#define CONFIG_ENV_ADDR 0x1c0000
+#define CONFIG_ENV_OFFSET 0x1c0000 /* env starts here */
+
+/*
+ * Default environment variables
+ */
+#define CONFIG_BOOTCOMMAND \
+ "usb reset ; " \
+ "fatload usb 0:1 0x2000000 initramfs.bin ; "\
+ "bootm 0x2000000 ; " \
+ "ubi part ubi; " \
+ "ubi read 0x800000 kernel; " \
+ "bootm 0x800000"
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "console=console=ttyS0,115200\0" \
+ "mtdids=nand0=orion_nand\0" \
+ "mtdparts="CONFIG_MTDPARTS_DEFAULT "\0" \
+ "bootargs_root=\0"
+
+/*
+ * Ethernet Driver configuration
+ */
+#ifdef CONFIG_CMD_NET
+#define CONFIG_NETCONSOLE
+#define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */
+#define CONFIG_PHY_BASE_ADR 0
+#endif /* CONFIG_CMD_NET */
+
+/*
+ * File system
+ */
+#define CONFIG_JFFS2_NAND
+#define CONFIG_JFFS2_LZO
+
+/*
+ * SATA
+ */
+#ifdef CONFIG_MVSATA_IDE
+#define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET
+#endif
+
+/*
+ * Date Time
+ */
+#ifdef CONFIG_CMD_DATE
+#define CONFIG_RTC_MV
+#endif /* CONFIG_CMD_DATE */
+
+/*
+ * Kirkwood GPIO
+ */
+#define CONFIG_KIRKWOOD_GPIO
+
+#endif /* _CONFIG_POGOPLUGV4_H */
--- /dev/null
+++ b/include/kirkwood_mmc.h
@@ -0,0 +1,268 @@
+/*
+ * (C) Copyright 2014 <ebbes.ebbes@gmail.com>
+ *
+ * Based on
+ *
+ * (C) Copyright 2012
+ * Marvell Semiconductor <www.marvell.com>
+ * Written-by: Gérald Kerma <uboot at doukki.net>
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __KIRKWOOD_MMC_H__
+#define __KIRKWOOD_MMC_H__
+
+/*
+ * Clock rates
+ */
+
+#define KW_MMC_CLOCKRATE_MAX 50000000
+#define KW_MMC_BASE_DIV_MAX 0x7ff
+#define KW_MMC_BASE_FAST_CLOCK CONFIG_SYS_TCLK
+#define KW_MMC_BASE_FAST_CLK_100 100000000
+#define KW_MMC_BASE_FAST_CLK_200 200000000
+
+/*
+ * Macros
+ */
+#define kwsd_write(offs, val) writel(val, CONFIG_SYS_MMC_BASE + (offs))
+#define kwsd_read(offs) readl(CONFIG_SYS_MMC_BASE + (offs))
+
+#define KW_MMC_MAKE_CMD(c, f) (((c & 0xff) << 8) | (f & 0xff))
+
+/* SDIO register */
+#define SDIO_SYS_ADDR_LOW 0x000
+#define SDIO_SYS_ADDR_HI 0x004
+#define SDIO_BLK_SIZE 0x008
+#define SDIO_BLK_COUNT 0x00c
+#define SDIO_ARG_LOW 0x010
+#define SDIO_ARG_HI 0x014
+#define SDIO_XFER_MODE 0x018
+#define SDIO_CMD 0x01c
+#define SDIO_RSP(i) (0x020 + ((i)<<2))
+#define SDIO_RSP0 0x020
+#define SDIO_RSP1 0x024
+#define SDIO_RSP2 0x028
+#define SDIO_RSP3 0x02c
+#define SDIO_RSP4 0x030
+#define SDIO_RSP5 0x034
+#define SDIO_RSP6 0x038
+#define SDIO_RSP7 0x03c
+#define SDIO_BUF_DATA_PORT 0x040
+#define SDIO_RSVED 0x044
+#define SDIO_HW_STATE 0x048
+#define SDIO_PRESENT_STATE0 0x048
+#define SDIO_PRESENT_STATE1 0x04c
+#define SDIO_HOST_CTRL 0x050
+#define SDIO_BLK_GAP_CTRL 0x054
+#define SDIO_CLK_CTRL 0x058
+#define SDIO_SW_RESET 0x05c
+#define SDIO_NOR_INTR_STATUS 0x060
+#define SDIO_ERR_INTR_STATUS 0x064
+#define SDIO_NOR_STATUS_EN 0x068
+#define SDIO_ERR_STATUS_EN 0x06c
+#define SDIO_NOR_INTR_EN 0x070
+#define SDIO_ERR_INTR_EN 0x074
+#define SDIO_AUTOCMD12_ERR_STATUS 0x078
+#define SDIO_CURR_BYTE_LEFT 0x07c
+#define SDIO_CURR_BLK_LEFT 0x080
+#define SDIO_AUTOCMD12_ARG_LOW 0x084
+#define SDIO_AUTOCMD12_ARG_HI 0x088
+#define SDIO_AUTOCMD12_INDEX 0x08c
+#define SDIO_AUTO_RSP(i) (0x090 + ((i)<<2))
+#define SDIO_AUTO_RSP0 0x090
+#define SDIO_AUTO_RSP1 0x094
+#define SDIO_AUTO_RSP2 0x098
+#define SDIO_CLK_DIV 0x128
+
+#define WINDOW_CTRL(i) (0x108 + ((i) << 3))
+#define WINDOW_BASE(i) (0x10c + ((i) << 3))
+
+/* SDIO_PRESENT_STATE */
+#define CARD_BUSY (1 << 1)
+#define CMD_INHIBIT (1 << 0)
+#define CMD_TXACTIVE (1 << 8)
+#define CMD_RXACTIVE (1 << 9)
+#define CMD_AUTOCMD12ACTIVE (1 << 14)
+#define CMD_BUS_BUSY (CMD_AUTOCMD12ACTIVE | \
+ CMD_RXACTIVE | \
+ CMD_TXACTIVE | \
+ CMD_INHIBIT | \
+ CARD_BUSY)
+
+/*
+ * SDIO_CMD
+ */
+
+#define SDIO_CMD_RSP_NONE (0 << 0)
+#define SDIO_CMD_RSP_136 (1 << 0)
+#define SDIO_CMD_RSP_48 (2 << 0)
+#define SDIO_CMD_RSP_48BUSY (3 << 0)
+
+#define SDIO_CMD_CHECK_DATACRC16 (1 << 2)
+#define SDIO_CMD_CHECK_CMDCRC (1 << 3)
+#define SDIO_CMD_INDX_CHECK (1 << 4)
+#define SDIO_CMD_DATA_PRESENT (1 << 5)
+#define SDIO_UNEXPECTED_RESP (1 << 7)
+
+#define SDIO_CMD_INDEX(x) ((x) << 8)
+
+/*
+ * SDIO_XFER_MODE
+ */
+
+#define SDIO_XFER_MODE_STOP_CLK (1 << 5)
+#define SDIO_XFER_MODE_HW_WR_DATA_EN (1 << 1)
+#define SDIO_XFER_MODE_AUTO_CMD12 (1 << 2)
+#define SDIO_XFER_MODE_INT_CHK_EN (1 << 3)
+#define SDIO_XFER_MODE_TO_HOST (1 << 4)
+#define SDIO_XFER_MODE_DMA (0 << 6)
+
+/*
+ * SDIO_HOST_CTRL
+ */
+
+#define SDIO_HOST_CTRL_PUSH_PULL_EN (1 << 0)
+
+#define SDIO_HOST_CTRL_CARD_TYPE_MEM_ONLY (0 << 1)
+#define SDIO_HOST_CTRL_CARD_TYPE_IO_ONLY (1 << 1)
+#define SDIO_HOST_CTRL_CARD_TYPE_IO_MEM_COMBO (2 << 1)
+#define SDIO_HOST_CTRL_CARD_TYPE_IO_MMC (3 << 1)
+#define SDIO_HOST_CTRL_CARD_TYPE_MASK (3 << 1)
+
+#define SDIO_HOST_CTRL_BIG_ENDIAN (1 << 3)
+#define SDIO_HOST_CTRL_LSB_FIRST (1 << 4)
+#define SDIO_HOST_CTRL_DATA_WIDTH_1_BIT (0 << 9)
+#define SDIO_HOST_CTRL_DATA_WIDTH_4_BITS (1 << 9)
+#define SDIO_HOST_CTRL_HI_SPEED_EN (1 << 10)
+
+#define SDIO_HOST_CTRL_TMOUT_MAX 0xf
+#define SDIO_HOST_CTRL_TMOUT_MASK (0xf << 11)
+#define SDIO_HOST_CTRL_TMOUT(x) ((x) << 11)
+#define SDIO_HOST_CTRL_TMOUT_EN (1 << 15)
+
+/*
+ * SDIO_SW_RESET
+ */
+
+#define SDIO_SW_RESET_NOW (1 << 8)
+
+/*
+ * Normal interrupt status bits
+ */
+
+#define SDIO_NOR_ERROR (1 << 15)
+#define SDIO_NOR_UNEXP_RSP (1 << 14)
+#define SDIO_NOR_AUTOCMD12_DONE (1 << 13)
+#define SDIO_NOR_SUSPEND_ON (1 << 12)
+#define SDIO_NOR_LMB_FF_8W_AVAIL (1 << 11)
+#define SDIO_NOR_LMB_FF_8W_FILLED (1 << 10)
+#define SDIO_NOR_READ_WAIT_ON (1 << 9)
+#define SDIO_NOR_CARD_INT (1 << 8)
+#define SDIO_NOR_READ_READY (1 << 5)
+#define SDIO_NOR_WRITE_READY (1 << 4)
+#define SDIO_NOR_DMA_INI (1 << 3)
+#define SDIO_NOR_BLK_GAP_EVT (1 << 2)
+#define SDIO_NOR_XFER_DONE (1 << 1)
+#define SDIO_NOR_CMD_DONE (1 << 0)
+
+/*
+ * Error status bits
+ */
+
+#define SDIO_ERR_CRC_STATUS (1 << 14)
+#define SDIO_ERR_CRC_STARTBIT (1 << 13)
+#define SDIO_ERR_CRC_ENDBIT (1 << 12)
+#define SDIO_ERR_RESP_TBIT (1 << 11)
+#define SDIO_ERR_XFER_SIZE (1 << 10)
+#define SDIO_ERR_CMD_STARTBIT (1 << 9)
+#define SDIO_ERR_AUTOCMD12 (1 << 8)
+#define SDIO_ERR_DATA_ENDBIT (1 << 6)
+#define SDIO_ERR_DATA_CRC (1 << 5)
+#define SDIO_ERR_DATA_TIMEOUT (1 << 4)
+#define SDIO_ERR_CMD_INDEX (1 << 3)
+#define SDIO_ERR_CMD_ENDBIT (1 << 2)
+#define SDIO_ERR_CMD_CRC (1 << 1)
+#define SDIO_ERR_CMD_TIMEOUT (1 << 0)
+#define SDIO_POLL_MASK 0xffff /* enable all for polling */
+
+#define MMC_BLOCK_SIZE 512
+
+/*
+ * CMD12 error status bits
+ */
+
+#define SDIO_AUTOCMD12_ERR_NOTEXE (1 << 0)
+#define SDIO_AUTOCMD12_ERR_TIMEOUT (1 << 1)
+#define SDIO_AUTOCMD12_ERR_CRC (1 << 2)
+#define SDIO_AUTOCMD12_ERR_ENDBIT (1 << 3)
+#define SDIO_AUTOCMD12_ERR_INDEX (1 << 4)
+#define SDIO_AUTOCMD12_ERR_RESP_T_BIT (1 << 5)
+#define SDIO_AUTOCMD12_ERR_RESP_STARTBIT (1 << 6)
+
+#define MMC_RSP_PRESENT (1 << 0)
+#define MMC_RSP_136 (1 << 1) /* 136 bit response */
+#define MMC_RSP_CRC (1 << 2) /* expect valid crc */
+#define MMC_RSP_BUSY (1 << 3) /* card may send busy */
+#define MMC_RSP_OPCODE (1 << 4) /* response contains opcode */
+
+#define MMC_BUSMODE_OPENDRAIN 1
+#define MMC_BUSMODE_PUSHPULL 2
+
+#define MMC_BUS_WIDTH_1 0
+#define MMC_BUS_WIDTH_4 2
+#define MMC_BUS_WIDTH_8 3
+
+#define MMC_CAP_4_BIT_DATA (1 << 0) /* Can the host do 4 bit transfers */
+#define MMC_CAP_MMC_HIGHSPEED (1 << 1) /* Can do MMC high-speed timing */
+#define MMC_CAP_SD_HIGHSPEED (1 << 2) /* Can do SD high-speed timing */
+#define MMC_CAP_SDIO_IRQ (1 << 3) /* Can signal pending SDIO IRQs */
+#define MMC_CAP_SPI (1 << 4) /* Talks only SPI protocols */
+#define MMC_CAP_NEEDS_POLL (1 << 5) /* Needs polling for card-detection */
+#define MMC_CAP_8_BIT_DATA (1 << 6) /* Can the host do 8 bit transfers */
+
+#define MMC_CAP_NONREMOVABLE (1 << 8) /* Nonremovable e.g. eMMC */
+#define MMC_CAP_WAIT_WHILE_BUSY (1 << 9) /* Waits while card is busy */
+#define MMC_CAP_ERASE (1 << 10) /* Allow erase/trim commands */
+#define MMC_CAP_1_8V_DDR (1 << 11) /* can support */
+ /* DDR mode at 1.8V */
+#define MMC_CAP_1_2V_DDR (1 << 12) /* can support */
+ /* DDR mode at 1.2V */
+#define MMC_CAP_POWER_OFF_CARD (1 << 13) /* Can power off after boot */
+#define MMC_CAP_BUS_WIDTH_TEST (1 << 14) /* CMD14/CMD19 bus width ok */
+#define MMC_CAP_UHS_SDR12 (1 << 15) /* Host supports UHS SDR12 mode */
+#define MMC_CAP_UHS_SDR25 (1 << 16) /* Host supports UHS SDR25 mode */
+#define MMC_CAP_UHS_SDR50 (1 << 17) /* Host supports UHS SDR50 mode */
+#define MMC_CAP_UHS_SDR104 (1 << 18) /* Host supports UHS SDR104 mode */
+#define MMC_CAP_UHS_DDR50 (1 << 19) /* Host supports UHS DDR50 mode */
+#define MMC_CAP_DRIVER_TYPE_A (1 << 23) /* Host supports Driver Type A */
+#define MMC_CAP_DRIVER_TYPE_C (1 << 24) /* Host supports Driver Type C */
+#define MMC_CAP_DRIVER_TYPE_D (1 << 25) /* Host supports Driver Type D */
+#define MMC_CAP_CMD23 (1 << 30) /* CMD23 supported. */
+#define MMC_CAP_HW_RESET (1 << 31) /* Hardware reset */
+
+/*
+ * Functions prototypes
+ *
+ * Original patch had static function declarations in this header file.
+ * Those should rather not be declared in the header as they only cause compiler warnings.
+ */
+int kw_mmc_initialize(bd_t *bis);
+
+#endif /* __KIRKWOOD_MMC_H__ */