You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 

144 lines
2.2 KiB

/dts-v1/;
#include "mt7620a.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
compatible = "phicomm,k2g", "ralink,mt7620a-soc";
model = "Phicomm K2G";
aliases {
led-boot = &led_blue;
led-failsafe = &led_blue;
led-running = &led_blue;
led-upgrade = &led_blue;
serial0 = &uartlite;
};
gpio-leds {
compatible = "gpio-leds";
led_blue: blue {
label = "k2g:blue:status";
gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
};
yellow {
label = "k2g:yellow:status";
gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
};
red {
label = "k2g:red:status";
gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
};
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
poll-interval = <20>;
reset {
label = "reset";
gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
};
};
&spi0 {
status = "okay";
m25p80@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <24000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
reg = <0x0 0x30000>;
label = "u-boot";
read-only;
};
partition@30000 {
reg = <0x30000 0x10000>;
label = "u-boot-env";
read-only;
};
factory: partition@40000 {
reg = <0x40000 0x10000>;
label = "factory";
read-only;
};
partition@50000 {
reg = <0x50000 0x50000>;
label = "permanent_config";
read-only;
};
partition@a0000 {
compatible = "denx,uimage";
reg = <0xa0000 0x760000>;
label = "firmware";
};
};
};
};
&pinctrl {
state_default: pinctrl0 {
gpio {
ralink,group = "i2c", "uartf";
ralink,function = "gpio";
};
};
};
&ethernet {
pinctrl-names = "default";
pinctrl-0 = <&rgmii2_pins &mdio_pins>;
mtd-mac-address = <&factory 0x28>;
mediatek,portmap = "llllw";
port@5 {
status = "okay";
phy-handle = <&phy5>;
phy-mode = "rgmii";
};
mdio-bus {
status = "okay";
phy5: ethernet-phy@5 {
reg = <5>;
phy-mode = "rgmii";
};
};
};
&pcie {
status = "okay";
};
&pcie0 {
mt76@0,0 {
reg = <0x0000 0 0 0 0>;
mediatek,mtd-eeprom = <&factory 0x8000>;
ieee80211-freq-limit = <5000000 6000000>;
};
};
&wmac {
ralink,mtd-eeprom = <&factory 0>;
pinctrl-names = "default";
pinctrl-0 = <&pa_pins>;
};