You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

Hannu Nyman fb8a578aa7 ipq806x: Enlarge R7800 flash - use netgear partition ... Increase the available flash memory size in Netgear R7800 by taking into the use the unused "netgear" partition that is located after the firmware partition. Available flash space for kernel+rootfs+overlay increases by 68 MB from 32 MB to 100 MB. In a typical build, overlay space increases from 15 to 85, increasing the package installation possibilities greatly. Reverting to the OEM firmware is still possible, as the OEM firmware contains logic to initialise the "netgear" partition if its contents do not match expectations. In OEM firmware, "netgear" contains 6 UBI sub-partitions that are defined in /etc/netgear.cfg and initialisation is done by /etc/preinit Tested with Openwrt master r7093-4fdc6ca31b and OEM V1.0.2.52 Reference to forum discussion in Netgear R7800 exploration thread: https://forum.lede-project.org/t/netgear-r7800-exploration-ipq8065-qca9984/285/1118 (messages 1118-1158) Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>		7 years ago
..
base-files	ipq806x: add support for Compex WPQ864	7 years ago
files-4.14/arch/arm/boot/dts	ipq806x: Enlarge R7800 flash - use netgear partition	7 years ago
image	ipq806x: define KERNEL_SIZE in KB instead of byte for the image generation	7 years ago
patches-4.14	kernel: bump 4.14 to 4.14.43	7 years ago
profiles	…
Makefile	ipq806x: switch to linux 4.14	7 years ago
config-4.14	ipq806x: Limit NR_CPUS to 2	7 years ago