You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
65 lines
2.3 KiB
65 lines
2.3 KiB
From: Miaoqing Pan <miaoqing@codeaurora.org>
|
|
Date: Fri, 15 Jan 2016 18:17:21 +0800
|
|
Subject: [PATCH] ath9k: fix data bus error on ar9300 and ar9580
|
|
|
|
One crash issue be found on ar9300: RTC_RC reg read leads crash, leading
|
|
the data bus error, due to RTC_RC reg write not happen properly.
|
|
|
|
Warm Reset trigger in continuous beacon stuck for one of the customer for
|
|
other chip, noticed the MAC was stuck in RTC reset. After analysis noticed
|
|
DMA did not complete when RTC was put in reset.
|
|
|
|
So, before resetting the MAC need to make sure there are no pending DMA
|
|
transactions because this reset does not reset all parts of the chip.
|
|
|
|
The 12th and 11th bit of MAC _DMA_CFG register used to do that.
|
|
12 cfg_halt_ack 0x0
|
|
0 DMA has not yet halted
|
|
1 DMA has halted
|
|
11 cfg_halt_req 0x0
|
|
0 DMA logic operates normally
|
|
1 Request DMA logic to stop so software can reset the MAC
|
|
|
|
The Bit [12] of this register indicates when the halt has taken effect or
|
|
not. the DMA halt IS NOT recoverable; once software sets bit [11] to
|
|
request a DMA halt, software must wait for bit [12] to be set and reset
|
|
the MAC.
|
|
|
|
So, the same thing we implemented for ar9580 chip.
|
|
|
|
Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org>
|
|
---
|
|
|
|
--- a/drivers/net/wireless/ath/ath9k/hw.c
|
|
+++ b/drivers/net/wireless/ath/ath9k/hw.c
|
|
@@ -1368,6 +1368,16 @@ static bool ath9k_hw_set_reset(struct at
|
|
if (ath9k_hw_mci_is_enabled(ah))
|
|
ar9003_mci_check_gpm_offset(ah);
|
|
|
|
+ /* DMA HALT added to resolve ar9300 and ar9580 bus error during
|
|
+ * RTC_RC reg read
|
|
+ */
|
|
+ if (AR_SREV_9300(ah) || AR_SREV_9580(ah)) {
|
|
+ REG_SET_BIT(ah, AR_CFG, AR_CFG_HALT_REQ);
|
|
+ ath9k_hw_wait(ah, AR_CFG, AR_CFG_HALT_ACK, AR_CFG_HALT_ACK,
|
|
+ 20 * AH_WAIT_TIMEOUT);
|
|
+ REG_CLR_BIT(ah, AR_CFG, AR_CFG_HALT_REQ);
|
|
+ }
|
|
+
|
|
REG_WRITE(ah, AR_RTC_RC, rst_flags);
|
|
|
|
REGWRITE_BUFFER_FLUSH(ah);
|
|
--- a/drivers/net/wireless/ath/ath9k/reg.h
|
|
+++ b/drivers/net/wireless/ath/ath9k/reg.h
|
|
@@ -34,8 +34,10 @@
|
|
#define AR_CFG_SWRG 0x00000010
|
|
#define AR_CFG_AP_ADHOC_INDICATION 0x00000020
|
|
#define AR_CFG_PHOK 0x00000100
|
|
-#define AR_CFG_CLK_GATE_DIS 0x00000400
|
|
#define AR_CFG_EEBS 0x00000200
|
|
+#define AR_CFG_CLK_GATE_DIS 0x00000400
|
|
+#define AR_CFG_HALT_REQ 0x00000800
|
|
+#define AR_CFG_HALT_ACK 0x00001000
|
|
#define AR_CFG_PCI_MASTER_REQ_Q_THRESH 0x00060000
|
|
#define AR_CFG_PCI_MASTER_REQ_Q_THRESH_S 17
|
|
|
|
|