You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
Hauke Mehrtens 5caee877dc brcm47xx: increase max image size 9 years ago
config linux: make IPv6 builtin if selected (saves >30KB) 9 years ago
docs build: Prevent more gzip timestamps 10 years ago
include include/image.mk: make tar reproducible 9 years ago
package ugps: fix filename to eliminate build problems 9 years ago
scripts ipkg-build: add ogargs to outer tar/ipk 9 years ago
target brcm47xx: increase max image size 9 years ago
toolchain musl: add a hack to remove unused crypt() algorithms, saves ~14k after lzma 9 years ago
tools tools/firmware-utils: add header version 2 support for mktplinkfw 9 years ago
.gitattributes
.gitignore build: add integration for managing opkg package feed keys 10 years ago
BSDmakefile
Config.in scripts/config: sync with linux upstream 10 years ago
LICENSE
Makefile Makefile: move the cleaning of staging_dir/target* from dirclean to clean 10 years ago
README Add 'subversion' build dependency to README 10 years ago
feeds.conf.default feeds.conf.default: add new targets feed 10 years ago
rules.mk rules.mk: remove GCC 4.4 and GCC 4.5 conditional 9 years ago

README

This is the buildsystem for the OpenWrt Linux distribution.

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, bzip2, flex, python, perl, make,
find, grep, diff, unzip, gawk, getopt, subversion, libz-dev and libc headers.

Run "./scripts/feeds update -a" to get all the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install -a" to install symlinks of all of them into
package/feeds/.

Use "make menuconfig" to configure your image.

Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain,
the kernel and all choosen applications.

You can use "scripts/flashing/flash.sh" for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type "make -C docs/" to build it.

To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.


Sunshine!
Your OpenWrt Project
http://openwrt.org