You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
194 lines
5.2 KiB
194 lines
5.2 KiB
--- a/arch/mips/ar231x/Kconfig
|
|
+++ b/arch/mips/ar231x/Kconfig
|
|
@@ -1,6 +1,7 @@
|
|
config SOC_AR5312
|
|
bool "Atheros 5312/2312+ support"
|
|
depends on ATHEROS_AR231X
|
|
+ select GPIO_AR5312
|
|
default y
|
|
|
|
config SOC_AR2315
|
|
--- a/arch/mips/ar231x/ar5312.c
|
|
+++ b/arch/mips/ar231x/ar5312.c
|
|
@@ -192,6 +192,22 @@ static struct platform_device ar5312_phy
|
|
.num_resources = 1,
|
|
};
|
|
|
|
+static struct resource ar5312_gpio_res[] = {
|
|
+ {
|
|
+ .name = "ar5312-gpio",
|
|
+ .flags = IORESOURCE_MEM,
|
|
+ .start = AR5312_GPIO,
|
|
+ .end = AR5312_GPIO + 0x0c - 1,
|
|
+ },
|
|
+};
|
|
+
|
|
+static struct platform_device ar5312_gpio = {
|
|
+ .name = "ar5312-gpio",
|
|
+ .id = -1,
|
|
+ .resource = ar5312_gpio_res,
|
|
+ .num_resources = ARRAY_SIZE(ar5312_gpio_res),
|
|
+};
|
|
+
|
|
#ifdef CONFIG_LEDS_GPIO
|
|
static struct gpio_led ar5312_leds[] = {
|
|
{ .name = "wlan", .gpio = 0, .active_low = 1, },
|
|
@@ -282,6 +298,8 @@ int __init ar5312_init_devices(void)
|
|
|
|
platform_device_register(&ar5312_physmap_flash);
|
|
|
|
+ platform_device_register(&ar5312_gpio);
|
|
+
|
|
#ifdef CONFIG_LEDS_GPIO
|
|
ar5312_leds[0].gpio = config->sys_led_gpio;
|
|
platform_device_register(&ar5312_gpio_leds);
|
|
--- a/drivers/gpio/Kconfig
|
|
+++ b/drivers/gpio/Kconfig
|
|
@@ -108,6 +108,13 @@ config GPIO_MAX730X
|
|
|
|
comment "Memory mapped GPIO drivers:"
|
|
|
|
+config GPIO_AR5312
|
|
+ bool "AR5312 SoC GPIO support"
|
|
+ default y if SOC_AR5312
|
|
+ depends on SOC_AR5312
|
|
+ help
|
|
+ Say yes here to enable GPIO support for Atheros AR5312/AR2312+ SoCs.
|
|
+
|
|
config GPIO_CLPS711X
|
|
tristate "CLPS711X GPIO support"
|
|
depends on ARCH_CLPS711X || COMPILE_TEST
|
|
--- a/drivers/gpio/Makefile
|
|
+++ b/drivers/gpio/Makefile
|
|
@@ -15,6 +15,7 @@ obj-$(CONFIG_GPIO_ADNP) += gpio-adnp.o
|
|
obj-$(CONFIG_GPIO_ADP5520) += gpio-adp5520.o
|
|
obj-$(CONFIG_GPIO_ADP5588) += gpio-adp5588.o
|
|
obj-$(CONFIG_GPIO_AMD8111) += gpio-amd8111.o
|
|
+obj-$(CONFIG_GPIO_AR5312) += gpio-ar5312.o
|
|
obj-$(CONFIG_GPIO_ARIZONA) += gpio-arizona.o
|
|
obj-$(CONFIG_GPIO_BCM_KONA) += gpio-bcm-kona.o
|
|
obj-$(CONFIG_GPIO_BT8XX) += gpio-bt8xx.o
|
|
--- /dev/null
|
|
+++ b/drivers/gpio/gpio-ar5312.c
|
|
@@ -0,0 +1,121 @@
|
|
+/*
|
|
+ * This file is subject to the terms and conditions of the GNU General Public
|
|
+ * License. See the file "COPYING" in the main directory of this archive
|
|
+ * for more details.
|
|
+ *
|
|
+ * Copyright (C) 2003 Atheros Communications, Inc., All Rights Reserved.
|
|
+ * Copyright (C) 2006 FON Technology, SL.
|
|
+ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
|
|
+ * Copyright (C) 2006-2009 Felix Fietkau <nbd@openwrt.org>
|
|
+ * Copyright (C) 2012 Alexandros C. Couloumbis <alex@ozo.com>
|
|
+ */
|
|
+
|
|
+#include <linux/kernel.h>
|
|
+#include <linux/init.h>
|
|
+#include <linux/platform_device.h>
|
|
+#include <linux/gpio.h>
|
|
+
|
|
+#define DRIVER_NAME "ar5312-gpio"
|
|
+
|
|
+#define AR5312_GPIO_DO 0x00 /* output register */
|
|
+#define AR5312_GPIO_DI 0x04 /* intput register */
|
|
+#define AR5312_GPIO_CR 0x08 /* control register */
|
|
+
|
|
+#define AR5312_GPIO_CR_M(x) (1 << (x)) /* mask for i/o */
|
|
+#define AR5312_GPIO_CR_O(x) (0 << (x)) /* mask for output */
|
|
+#define AR5312_GPIO_CR_I(x) (1 << (x)) /* mask for input */
|
|
+#define AR5312_GPIO_CR_INT(x) (1 << ((x)+8)) /* mask for interrupt */
|
|
+#define AR5312_GPIO_CR_UART(x) (1 << ((x)+16)) /* uart multiplex */
|
|
+
|
|
+#define AR5312_GPIO_NUM 8
|
|
+
|
|
+static void __iomem *ar5312_mem;
|
|
+
|
|
+static inline u32 ar5312_gpio_reg_read(unsigned reg)
|
|
+{
|
|
+ return __raw_readl(ar5312_mem + reg);
|
|
+}
|
|
+
|
|
+static inline void ar5312_gpio_reg_write(unsigned reg, u32 val)
|
|
+{
|
|
+ __raw_writel(val, ar5312_mem + reg);
|
|
+}
|
|
+
|
|
+static inline void ar5312_gpio_reg_mask(unsigned reg, u32 mask, u32 val)
|
|
+{
|
|
+ ar5312_gpio_reg_write(reg, (ar5312_gpio_reg_read(reg) & ~mask) | val);
|
|
+}
|
|
+
|
|
+static int ar5312_gpio_get_val(struct gpio_chip *chip, unsigned gpio)
|
|
+{
|
|
+ return (ar5312_gpio_reg_read(AR5312_GPIO_DI) >> gpio) & 1;
|
|
+}
|
|
+
|
|
+static void ar5312_gpio_set_val(struct gpio_chip *chip, unsigned gpio, int val)
|
|
+{
|
|
+ u32 reg = ar5312_gpio_reg_read(AR5312_GPIO_DO);
|
|
+
|
|
+ reg = val ? reg | (1 << gpio) : reg & ~(1 << gpio);
|
|
+ ar5312_gpio_reg_write(AR5312_GPIO_DO, reg);
|
|
+}
|
|
+
|
|
+static int ar5312_gpio_dir_in(struct gpio_chip *chip, unsigned gpio)
|
|
+{
|
|
+ ar5312_gpio_reg_mask(AR5312_GPIO_CR, 0, 1 << gpio);
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static int ar5312_gpio_dir_out(struct gpio_chip *chip, unsigned gpio, int val)
|
|
+{
|
|
+ ar5312_gpio_reg_mask(AR5312_GPIO_CR, 1 << gpio, 0);
|
|
+ ar5312_gpio_set_val(chip, gpio, val);
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static struct gpio_chip ar5312_gpio_chip = {
|
|
+ .label = DRIVER_NAME,
|
|
+ .direction_input = ar5312_gpio_dir_in,
|
|
+ .direction_output = ar5312_gpio_dir_out,
|
|
+ .set = ar5312_gpio_set_val,
|
|
+ .get = ar5312_gpio_get_val,
|
|
+ .base = 0,
|
|
+ .ngpio = AR5312_GPIO_NUM,
|
|
+};
|
|
+
|
|
+static int ar5312_gpio_probe(struct platform_device *pdev)
|
|
+{
|
|
+ struct device *dev = &pdev->dev;
|
|
+ struct resource *res;
|
|
+ int ret;
|
|
+
|
|
+ if (ar5312_mem)
|
|
+ return -EBUSY;
|
|
+
|
|
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
+ ar5312_mem = devm_ioremap_resource(dev, res);
|
|
+ if (IS_ERR(ar5312_mem))
|
|
+ return PTR_ERR(ar5312_mem);
|
|
+
|
|
+ ar5312_gpio_chip.dev = dev;
|
|
+ ret = gpiochip_add(&ar5312_gpio_chip);
|
|
+ if (ret) {
|
|
+ dev_err(dev, "failed to add gpiochip\n");
|
|
+ return ret;
|
|
+ }
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static struct platform_driver ar5312_gpio_driver = {
|
|
+ .probe = ar5312_gpio_probe,
|
|
+ .driver = {
|
|
+ .name = DRIVER_NAME,
|
|
+ .owner = THIS_MODULE,
|
|
+ }
|
|
+};
|
|
+
|
|
+static int __init ar5312_gpio_init(void)
|
|
+{
|
|
+ return platform_driver_register(&ar5312_gpio_driver);
|
|
+}
|
|
+subsys_initcall(ar5312_gpio_init);
|
|
|