You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

David Bauer 6476148034 ath79: add support for OCEDO Raccoon ... This commit adds support for the OCEDO Raccoon SOC: Atheros AR9344 RAM: 128MB FLASH: 16MiB WLAN1: AR9344 2.4 GHz 802.11bgn 2x2 WLAN2: AR9382 5 GHz 802.11an 2x2 INPUT: RESET button LED: Power, LAN, WiFi 2.4, WiFi 5 Serial: Header Next to Black metal shield Pinout is 3.3V - GND - TX - RX (Arrow Pad is 3.3V) The Serial setting is 115200-8-N-1. NOTE: The U-Boot won't boot with the serial attached. Boot the device without serial attached and attach it after 3 seconds. Tested and working: - Ethernet - 2.4 GHz WiFi - 5 GHz WiFi - TFTP boot from ramdisk image - Installation via ramdisk image - OpenWRT sysupgrade - Buttons - LEDs Installation seems to be possible only through booting an OpenWRT ramdisk image. Hold down the reset button while powering on the device. It will load a ramdisk image named 'raccoon-uImage-initramfs-lzma.bin' from 192.168.100.8. Note: depending on the present software, the device might also try to pull a file called 'raccoon-uimage-factory'. Only the name differs, it is still used as a ramdisk image. Wait for the ramdisk image to boot. OpenWRT can be written to the flash via sysupgrade or mtd. Due to the flip-flop bootloader which we not (yet) support, you need to set the partition the bootloader is selecting. It is possible from the initramfs image with > fw_setenv bootcmd run bootcmd_1 Afterwards you can reboot the device. Signed-off-by: David Bauer <mail@david-bauer.net>		7 years ago
..
adm5120	…
adm8668	…
apm821xx	…
ar7	…
ar71xx	ar71xx: factor out safe loader image build code	7 years ago
arc770	…
archs38	…
armvirt	…
at91	kernel: remove DEVMEM and DEVKMEM from target's config	7 years ago
ath25	…
ath79	ath79: add support for OCEDO Raccoon	7 years ago
au1000	…
bcm53xx	…
brcm47xx	…
brcm63xx	…
brcm2708	brcm2708: platform.sh: fix tar directory directive	7 years ago
cns3xxx	…
gemini	kernel: remove DEVMEM and DEVKMEM from target's config	7 years ago
generic	kernel: move CONFIG_USB_MTU3 to generic config	7 years ago
imx6	…
ipq40xx	…
ipq806x	…
ixp4xx	…
kirkwood	…
lantiq	…
layerscape	kernel: remove DEVMEM and DEVKMEM from target's config	7 years ago
malta	…
mcs814x	…
mediatek	kernel: move CONFIG_USB_MTU3 to generic config	7 years ago
mpc85xx	WDR4900v1 remove dt node for absent hw crypto.	7 years ago
mvebu	…
mxs	…
octeon	…
octeontx	…
omap	…
omap24xx	…
orion	…
oxnas	kernel: remove DEVMEM and DEVKMEM from target's config	7 years ago
pistachio	…
ppc40x	…
ppc44x	…
ramips	ramips: add support for Blueendless Kimax U35WF	7 years ago
rb532	…
sunxi	sunxi: Enable SD block devices	7 years ago
uml	…
x86	…
xburst	…
zynq	…
Makefile	…