You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
112 lines
4.6 KiB
112 lines
4.6 KiB
From b2e79053e7456a961249c8865214a1e95b49c863 Mon Sep 17 00:00:00 2001
|
|
From: Christian Lamparter <chunkeey@googlemail.com>
|
|
Date: Sat, 3 Jun 2017 18:16:19 +0200
|
|
Subject: [PATCH] net: emac: fix reset timeout with AR8035 phy
|
|
|
|
This patch fixes a problem where the AR8035 PHY can't be
|
|
detected on an Cisco Meraki MR24, if the ethernet cable is
|
|
not connected on boot.
|
|
|
|
Russell Senior provided steps to reproduce the issue:
|
|
|Disconnect ethernet cable, apply power, wait until device has booted,
|
|
|plug in ethernet, check for interfaces, no eth0 is listed.
|
|
|
|
|
|This appears to be a problem during probing of the AR8035 Phy chip.
|
|
|When ethernet has no link, the phy detection fails, and eth0 is not
|
|
|created. Plugging ethernet later has no effect, because there is no
|
|
|interface as far as the kernel is concerned. The relevant part of
|
|
|the boot log looks like this:
|
|
|this is the failing case:
|
|
|
|
|
|[ 0.876611] /plb/opb/emac-rgmii@ef601500: input 0 in RGMII mode
|
|
|[ 0.882532] /plb/opb/ethernet@ef600c00: reset timeout
|
|
|[ 0.888546] /plb/opb/ethernet@ef600c00: can't find PHY!
|
|
|and the succeeding case:
|
|
|
|
|
|[ 0.876672] /plb/opb/emac-rgmii@ef601500: input 0 in RGMII mode
|
|
|[ 0.883952] eth0: EMAC-0 /plb/opb/ethernet@ef600c00, MAC 00:01:..
|
|
|[ 0.890822] eth0: found Atheros 8035 Gigabit Ethernet PHY (0x01)
|
|
|
|
Based on the comment and the commit message of
|
|
commit 23fbb5a87c56 ("emac: Fix EMAC soft reset on 460EX/GT").
|
|
This is because the AR8035 PHY doesn't provide the TX Clock,
|
|
if the ethernet cable is not attached. This causes the reset
|
|
to timeout and the PHY detection code in emac_init_phy() is
|
|
unable to detect the AR8035 PHY. As a result, the emac driver
|
|
bails out early and the user left with no ethernet.
|
|
|
|
In order to stay compatible with existing configurations, the driver
|
|
tries the current reset approach at first. Only if the first attempt
|
|
timed out, it does perform one more retry with the clock input
|
|
temporarily switched to the internal clock source for just the
|
|
duration of the reset.
|
|
|
|
LEDE-Bug: #687 <https://bugs.lede-project.org/index.php?do=details&task_id=687>
|
|
|
|
Cc: Chris Blake <chrisrblake93@gmail.com>
|
|
Reported-by: Russell Senior <russell@personaltelco.net>
|
|
Fixes: 23fbb5a87c56e98 ("emac: Fix EMAC soft reset on 460EX/GT")
|
|
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
|
|
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
|
|
---
|
|
drivers/net/ethernet/ibm/emac/core.c | 26 ++++++++++++++++++++++----
|
|
1 file changed, 22 insertions(+), 4 deletions(-)
|
|
|
|
--- a/drivers/net/ethernet/ibm/emac/core.c
|
|
+++ b/drivers/net/ethernet/ibm/emac/core.c
|
|
@@ -352,6 +352,7 @@ static int emac_reset(struct emac_instan
|
|
{
|
|
struct emac_regs __iomem *p = dev->emacp;
|
|
int n = 20;
|
|
+ bool __maybe_unused try_internal_clock = false;
|
|
|
|
DBG(dev, "reset" NL);
|
|
|
|
@@ -364,6 +365,7 @@ static int emac_reset(struct emac_instan
|
|
}
|
|
|
|
#ifdef CONFIG_PPC_DCR_NATIVE
|
|
+do_retry:
|
|
/*
|
|
* PPC460EX/GT Embedded Processor Advanced User's Manual
|
|
* section 28.10.1 Mode Register 0 (EMACx_MR0) states:
|
|
@@ -371,10 +373,19 @@ static int emac_reset(struct emac_instan
|
|
* of the EMAC. If none is present, select the internal clock
|
|
* (SDR0_ETH_CFG[EMACx_PHY_CLK] = 1).
|
|
* After a soft reset, select the external clock.
|
|
+ *
|
|
+ * The AR8035-A PHY Meraki MR24 does not provide a TX Clk if the
|
|
+ * ethernet cable is not attached. This causes the reset to timeout
|
|
+ * and the PHY detection code in emac_init_phy() is unable to
|
|
+ * communicate and detect the AR8035-A PHY. As a result, the emac
|
|
+ * driver bails out early and the user has no ethernet.
|
|
+ * In order to stay compatible with existing configurations, the
|
|
+ * driver will temporarily switch to the internal clock, after
|
|
+ * the first reset fails.
|
|
*/
|
|
if (emac_has_feature(dev, EMAC_FTR_460EX_PHY_CLK_FIX)) {
|
|
- if (dev->phy_address == 0xffffffff &&
|
|
- dev->phy_map == 0xffffffff) {
|
|
+ if (try_internal_clock || (dev->phy_address == 0xffffffff &&
|
|
+ dev->phy_map == 0xffffffff)) {
|
|
/* No PHY: select internal loop clock before reset */
|
|
dcri_clrset(SDR0, SDR0_ETH_CFG,
|
|
0, SDR0_ETH_CFG_ECS << dev->cell_index);
|
|
@@ -392,8 +403,15 @@ static int emac_reset(struct emac_instan
|
|
|
|
#ifdef CONFIG_PPC_DCR_NATIVE
|
|
if (emac_has_feature(dev, EMAC_FTR_460EX_PHY_CLK_FIX)) {
|
|
- if (dev->phy_address == 0xffffffff &&
|
|
- dev->phy_map == 0xffffffff) {
|
|
+ if (!n && !try_internal_clock) {
|
|
+ /* first attempt has timed out. */
|
|
+ n = 20;
|
|
+ try_internal_clock = true;
|
|
+ goto do_retry;
|
|
+ }
|
|
+
|
|
+ if (try_internal_clock || (dev->phy_address == 0xffffffff &&
|
|
+ dev->phy_map == 0xffffffff)) {
|
|
/* No PHY: restore external clock source after reset */
|
|
dcri_clrset(SDR0, SDR0_ETH_CFG,
|
|
SDR0_ETH_CFG_ECS << dev->cell_index, 0);
|
|
|