You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
207 lines
5.8 KiB
207 lines
5.8 KiB
/*==============================================================================*/
|
|
/* rbmipsnand.c */
|
|
/* This module is derived from the 2.4 driver shipped by Microtik for their */
|
|
/* Routerboard 1xx and 5xx series boards. It provides support for the built in */
|
|
/* NAND flash on the Routerboard 1xx series boards for Linux 2.6.19+. */
|
|
/* Licence: Original Microtik code seems not to have a licence. */
|
|
/* Rewritten code all GPL V2. */
|
|
/* Copyright(C) 2007 david.goodenough@linkchoose.co.uk (for rewriten code) */
|
|
/*==============================================================================*/
|
|
|
|
#include <linux/io.h>
|
|
#include <linux/module.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/mtd/nand.h>
|
|
#include <linux/mtd/mtd.h>
|
|
#include <linux/mtd/partitions.h>
|
|
#include <linux/delay.h>
|
|
|
|
#include <asm/io.h>
|
|
#include <asm/irq.h>
|
|
#include <asm/bootinfo.h>
|
|
#include <asm/mach-adm5120/adm5120_info.h>
|
|
#include <asm/mach-adm5120/adm5120_defs.h>
|
|
|
|
#define SMEM1(x) (*((volatile unsigned char *) (KSEG1ADDR(ADM5120_SRAM1_BASE) + x)))
|
|
|
|
#define NAND_RW_REG 0x0 //data register
|
|
#define NAND_SET_CEn 0x1 //CE# low
|
|
#define NAND_CLR_CEn 0x2 //CE# high
|
|
#define NAND_CLR_CLE 0x3 //CLE low
|
|
#define NAND_SET_CLE 0x4 //CLE high
|
|
#define NAND_CLR_ALE 0x5 //ALE low
|
|
#define NAND_SET_ALE 0x6 //ALE high
|
|
#define NAND_SET_SPn 0x7 //SP# low (use spare area)
|
|
#define NAND_CLR_SPn 0x8 //SP# high (do not use spare area)
|
|
#define NAND_SET_WPn 0x9 //WP# low
|
|
#define NAND_CLR_WPn 0xA //WP# high
|
|
#define NAND_STS_REG 0xB //Status register
|
|
|
|
#define MEM32(x) *((volatile unsigned *) (x))
|
|
|
|
static struct mtd_partition partition_info[] = {
|
|
{
|
|
name: "RouterBoard NAND Boot",
|
|
offset: 0,
|
|
size: 4 * 1024 * 1024
|
|
},
|
|
{
|
|
name: "rootfs",
|
|
offset: MTDPART_OFS_NXTBLK,
|
|
size: MTDPART_SIZ_FULL
|
|
}
|
|
};
|
|
|
|
static struct nand_ecclayout rb_ecclayout = {
|
|
.eccbytes = 6,
|
|
.eccpos = { 8, 9, 10, 13, 14, 15 },
|
|
.oobavail = 9,
|
|
.oobfree = { { 0, 4 }, { 6, 2 }, { 11, 2 }, { 4, 1} }
|
|
};
|
|
|
|
struct adm5120_nand_info {
|
|
struct nand_chip chip;
|
|
struct mtd_info mtd;
|
|
void __iomem *io_base;
|
|
#ifdef CONFIG_MTD_PARTITIONS
|
|
int nr_parts;
|
|
struct mtd_partition *parts;
|
|
#endif
|
|
unsigned int init_ok;
|
|
};
|
|
|
|
static int rb100_dev_ready(struct mtd_info *mtd)
|
|
{
|
|
return SMEM1(NAND_STS_REG) & 0x80;
|
|
}
|
|
|
|
static void rbmips_hwcontrol100(struct mtd_info *mtd, int cmd, unsigned int ctrl)
|
|
{
|
|
struct nand_chip *chip = mtd->priv;
|
|
if (ctrl & NAND_CTRL_CHANGE)
|
|
{
|
|
SMEM1((( ctrl & NAND_CLE) ? NAND_SET_CLE : NAND_CLR_CLE)) = 0x01;
|
|
SMEM1((( ctrl & NAND_ALE) ? NAND_SET_ALE : NAND_CLR_ALE)) = 0x01;
|
|
SMEM1((( ctrl & NAND_NCE) ? NAND_SET_CEn : NAND_CLR_CEn)) = 0x01;
|
|
}
|
|
if (cmd != NAND_CMD_NONE)
|
|
writeb( cmd, chip->IO_ADDR_W);
|
|
}
|
|
|
|
/*========================================================================*/
|
|
/* We need to use the OLD Yaffs-1 OOB layout, otherwise the RB bootloader */
|
|
/* will not be able to find the kernel that we load. So set the oobinfo */
|
|
/* when creating the partitions. */
|
|
/*========================================================================*/
|
|
|
|
|
|
unsigned get_rbnand_block_size(struct adm5120_nand_info *data)
|
|
{
|
|
return data->init_ok ? data->mtd.writesize : 0;
|
|
}
|
|
|
|
EXPORT_SYMBOL(get_rbnand_block_size);
|
|
|
|
static int rbmips_probe(struct platform_device *pdev)
|
|
{
|
|
struct adm5120_nand_info *data;
|
|
int res = 0;
|
|
|
|
/* Allocate memory for the nand_chip structure */
|
|
data = kzalloc(sizeof(*data), GFP_KERNEL);
|
|
if (!data) {
|
|
dev_err(&pdev->dev, "Failed to allocate device structure\n");
|
|
return -ENOMEM;
|
|
|
|
}
|
|
|
|
data->io_base = ioremap(pdev->resource[0].start, pdev->resource[0].end - pdev->resource[0].start + 1);
|
|
|
|
if (data->io_base == NULL) {
|
|
dev_err(&pdev->dev, "ioremap failed\n");
|
|
kfree(data);
|
|
return -EIO;
|
|
}
|
|
|
|
MEM32(0xB2000064) = 0x100;
|
|
MEM32(0xB2000008) = 0x1;
|
|
SMEM1(NAND_SET_SPn) = 0x01;
|
|
SMEM1(NAND_CLR_WPn) = 0x01;
|
|
|
|
data->chip.priv = &data;
|
|
data->mtd.priv = &data->chip;
|
|
data->mtd.owner = THIS_MODULE;
|
|
|
|
data->init_ok = 0;
|
|
data->chip.IO_ADDR_R = (unsigned char *)KSEG1ADDR(ADM5120_SRAM1_BASE);
|
|
data->chip.IO_ADDR_W = data->chip.IO_ADDR_R;
|
|
data->chip.cmd_ctrl = rbmips_hwcontrol100;
|
|
data->chip.dev_ready = rb100_dev_ready;
|
|
data->chip.ecc.mode = NAND_ECC_SOFT;
|
|
data->chip.ecc.layout = &rb_ecclayout;
|
|
data->chip.chip_delay = 25;
|
|
data->chip.options |= NAND_NO_AUTOINCR;
|
|
|
|
platform_set_drvdata(pdev, data);
|
|
|
|
/* Why do we need to scan 4 times ? */
|
|
if (nand_scan(&data->mtd, 1) && nand_scan(&data->mtd, 1) && nand_scan(&data->mtd, 1) && nand_scan(&data->mtd, 1)) {
|
|
printk(KERN_INFO "RB1xxx nand device not found\n");
|
|
res = -ENXIO;
|
|
goto out;
|
|
}
|
|
|
|
add_mtd_partitions(&data->mtd, partition_info, 2);
|
|
data->init_ok = 1;
|
|
|
|
res = add_mtd_device(&data->mtd);
|
|
if (!res)
|
|
return res;
|
|
|
|
nand_release(&data->mtd);
|
|
out:
|
|
platform_set_drvdata(pdev, NULL);
|
|
iounmap(data->io_base);
|
|
kfree(data);
|
|
return res;
|
|
}
|
|
|
|
static int __devexit rbmips_remove(struct platform_device *pdev)
|
|
{
|
|
struct adm5120_nand_info *data = platform_get_drvdata(pdev);
|
|
|
|
nand_release(&data->mtd);
|
|
iounmap(data->io_base);
|
|
kfree(data);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct platform_driver adm5120_nand_driver = {
|
|
.probe = rbmips_probe,
|
|
.remove = rbmips_remove,
|
|
.driver = {
|
|
.name = "adm5120-nand",
|
|
.owner = THIS_MODULE,
|
|
},
|
|
};
|
|
|
|
static int __init adm5120_nand_init(void)
|
|
{
|
|
int err;
|
|
err = platform_driver_register(&adm5120_nand_driver);
|
|
return err;
|
|
}
|
|
|
|
static void __exit adm5120_nand_exit(void)
|
|
{
|
|
platform_driver_unregister(&adm5120_nand_driver);
|
|
}
|
|
|
|
module_init(adm5120_nand_init);
|
|
module_exit(adm5120_nand_exit);
|
|
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_AUTHOR("David Goodenough, Florian Fainelli");
|
|
MODULE_DESCRIPTION("RouterBOARD 100 NAND driver");
|
|
|
|
|