freifunkist-firmware

hsist

History

Christian Lamparter 098f7156cc ar71xx: add support for the Airtight C-60 This patch adds support for the Airtight C-60. SOC: Atheros AR9344 rev 2 (CPU:560.000MHz) RAM: 128 MiB NOR: MX25L3205D 4MiB NAND: ST Micro NAND 32MiB 3,3V 8-bit SW-NET: AR8327N (2 Ports) WLAN1: Dual-Band AR9340 Rev:2 (built-in SoC) WLAN2: Dual-Band AR9300 Rev:4 PCIe Chip The switch is setup for an accesspoint: LAN1: (gigabit) is the wan-port. LAN2: (fast ethernet) is bridged with the br-lan. Flashing Guide (via initramfs): 1. Connect a PC to the serial port of the C-60. power up the C-60. Enter u-boot command prompt: #> nand erase #> setenv bootcmd "bootm 0x9f060000" #> saveenv #> setenv ipaddr 192.168.1.1 #> setenv netmask 255.255.255.0 #> setenv serverip 192.168.1.100 #> setenv bootfile lede-ar71xx-nand-c-60-initramfs-kernel.bin #> tftpboot #> bootm 2. Wait for the C-60 to boot LEDE. On the root prompt. Enter: # ubiformat /dev/mtd4 # ubiattach -p /dev/mtd4 3. After that copy the sysupgrade.tar onto the router and run: # sysupgrade sysupgrade.tar to flash the image. Special thanks to Chris Blake <chrisrblake93@gmail.com>. He provided a C-60 unit and he helped with debugging the switch, LEDs and platfrom support. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>		8 years ago
..
lzma-loader	ar71xx/lzma-loader: fix O32 ABI conformance	9 years ago
Makefile	ar71xx: add relocation loader	8 years ago
generic.mk	ar71xx: move dragino2 from legacy to generic	8 years ago
legacy-devices.mk	ar71xx: move dragino2 from legacy to generic	8 years ago
legacy.mk	ar71xx: move dragino2 from legacy to generic	8 years ago
nand.mk	ar71xx: add support for the Airtight C-60	8 years ago
tp-link.mk	ar71xx: build image for Archer C7 v2 IL	8 years ago
ubinize-nbg6716.ini	ar71xx: nbg6716: Enable procd nand sysupgrage	11 years ago
ubinize-wndr4300.ini	ar71xx: remove old jffs2 marker from image generation on nand targets	11 years ago
ubnt.mk	image: remove padding parameter from append-kernel/append-rootfs	8 years ago