You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

Daniel F. Dickinson 60cf71ede7 ath79: Forward port support for CR3000 ... The PowerCloud Systems CR3000 was a cloud-managed CPE for a now defunct NaaS offering. It was previously supported under the ar71xx branch and this forward ports that support with some notable differences: 1) Since reverting to stock firmware is now irrelevant there is is only a single openwrt image generated which uses the entire flash rather than preserving PowerCloud-specific partitions that are unneeded to openwrt-- those partitions will be erased and used by the openwrt image. 2) Rather than use a non-standard probe order for the ethernet devices, this image uses a set of 'ip link set ethX name ethY' commands very early in preinit (before the network is used at all), in order to have the the switch and Wan use the same ethernet names as in previous images. 3) /etc/config/wireless will need to be regenerated as the path to the wireless device has changed due to differences in ath79 DT for ar93x compared to ar71xx images. 4) eth0 is wan and eth1 is lan (switch) Signed-off-by: Daniel F. Dickinson <cshored@thecshore.com>		6 years ago
..
base-files	ath79: Forward port support for CR3000	6 years ago
dts	ath79: Forward port support for CR3000	6 years ago
files	ath79: ag71xx: assert a switch reset if defined in dts.	6 years ago
generic	…
image	ath79: Forward port support for CR3000	6 years ago
nand	…
patches-4.14	kernel: bump 4.14 to 4.14.59	6 years ago
tiny	…
Makefile	…
config-4.14	…
modules.mk	…