You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

David Bauer c4931713df ath79: add support for OCEDO Koala ... This commit adds support for the OCEDO Koala SOC: Qualcomm QCA9558 (Scorpion) RAM: 128MB FLASH: 16MiB WLAN1: QCA9558 2.4 GHz 802.11bgn 3x3 WLAN2: QCA9880 5 GHz 802.11nac 3x3 INPUT: RESET button LED: Power, LAN, WiFi 2.4, WiFi 5, SYS Serial: Header Next to Black metal shield Pinout is 3.3V - GND - TX - RX (Arrow Pad is 3.3V) The Serial setting is 115200-8-N-1. Tested and working: - Ethernet - 2.4 GHz WiFi - 5 GHz WiFi - TFTP boot from ramdisk image - Installation via ramdisk image - OpenWRT sysupgrade - Buttons - LEDs Installation seems to be possible only through booting an OpenWRT ramdisk image. Hold down the reset button while powering on the device. It will load a ramdisk image named 'koala-uImage-initramfs-lzma.bin' from 192.168.100.8. Note: depending on the present software, the device might also try to pull a file called 'koala-uimage-factory'. Only the name differs, it is still used as a ramdisk image. Wait for the ramdisk image to boot. OpenWRT can be written to the flash via sysupgrade or mtd. Due to the flip-flop bootloader which we not (yet) support, you need to set the partition the bootloader is selecting. It is possible from the initramfs image with > fw_setenv bootcmd run bootcmd_1 Afterwards you can reboot the device. Signed-off-by: David Bauer <mail@david-bauer.net>		6 years ago
..
ar71xx	ar71xx: add support for OCEDO Koala	7 years ago
ath79	ath79: add support for OCEDO Koala	6 years ago
cns3xxx	treewide: use the generic board_name function	7 years ago
imx6	treewide: use the generic board_name function	7 years ago
ipq40xx	ipq40xx: add support for the ZyXEL NBG6617	6 years ago
ipq806x	ipq40xx: add target	7 years ago
kirkwood	kirkwood: add support for Iomega Storcenter ix2-200	6 years ago
lantiq	lantiq: use the compatible string as board name	7 years ago
layerscape	uboot-envtools: add configuration for Traverse LS1043 boards.	6 years ago
mvebu	mvebu: add support for WRT32X (venom)	7 years ago
mxs	treewide: use the generic board_name function	7 years ago
oxnas	treewide: use the generic board_name function	7 years ago
pistachio	…
ramips	ramips: add U-Boot env support for ALFA Network AC1200RM	7 years ago
uboot-envtools.sh	…