You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
Gabor Juhos 47665da430 update to 2.6.27.17 16 years ago
docs wireless.tex: update docs to reflect txpower move 16 years ago
include update to 2.6.27.17 16 years ago
package opkg: apparently array bounds checking is gcc 4.3 specific, move -Wno-array-bounds into TARGET_CFLAGS instead of a patch and make it conditional 16 years ago
scripts adam2flash: fix 'Interrupted system call' error when flashing (closes: #4490, thanks oliver) 16 years ago
target update to 2.6.27.17 16 years ago
toolchain fix gcc 4.3.x segfault triggered by using -frename-registers (reproduced on arm, might be relevant for other platforms as well) 16 years ago
tools firmware-utils/mkplanexfw: new firmware generation tool for the Planex MZK-W04NU device 16 years ago
.gitignore
BSDmakefile
Config.in
LICENSE
Makefile
README
feeds.conf.default
rules.mk

README

This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex, bison,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain,
the kernel and all choosen applications.

You can use scripts/flashing/flash.sh for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
Your OpenWrt Project
http://openwrt.org