You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

Petr Štetiar 40530c8eb4 ath79: Add support for Ubiquiti Nanostation M (XW) ... CPU: AR9342 SoC RAM: 64 MB DDR2 Flash: 8 MB NOR SPI Ports: 2x100 MBit (24V PoE in, 24V PoE out), AR8236 switch WLAN: 2.4/5 GHz UART: 1 UART LEDs: Power, 2x Ethernet, 4x RSSI LEDs (orange, red, 2x green) Buttons: Reset Flashing instructions using recovery method over TFTP 1. Unplug the ethernet cable from the router. 2. Using paper clip press and hold the router's reset button. Make sure you can feel it depressed by the paper clip. Do not release the button until step 4. 3. While keeping the reset button pressed in, plug the ethernet cable back into the AP. Keep the reset button depressed until you see the device's LEDs flashing in upgrade mode (alternating LED1/LED3 and LED2/LED4), this may take up to 25 seconds. 4. You may release the reset button, now the device should be in TFTP transfer mode. 5. Set a static IP on your Computer's NIC. A static IP of 192.168.1.25/24 should work. 6. Plug the PoE injector's LAN cable directly to your computer. 7. Start tftp client and issue following commands: tftp> binary tftp> connect 192.168.1.20 tftp> put openwrt-ath79-generic-ubnt-nano-m-xw-squashfs-factory.bin Tested-by: Joe Ayers <ae6xe@arrl.net> Signed-off-by: Petr Štetiar <ynezz@true.cz>		6 years ago
..
base-files	ath79: Add support for Ubiquiti Nanostation M (XW)	6 years ago
dts	ath79: Add support for Ubiquiti Nanostation M (XW)	6 years ago
files	ath79: gmac: ar934x: Add parser for mii-gmac0-slave	6 years ago
generic	…
image	ath79: Add support for Ubiquiti Nanostation M (XW)	6 years ago
nand	…
patches-4.14	kernel: bump 4.14 to 4.14.95	6 years ago
tiny	…
Makefile	…
config-4.14	…
modules.mk	…