You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
104 lines
3.5 KiB
104 lines
3.5 KiB
From e8a650fc27bf1e7d858c997fddd9944e6c222260 Mon Sep 17 00:00:00 2001
|
|
From: Aaron Shaw <shawaj@gmail.com>
|
|
Date: Thu, 4 Jan 2018 15:02:16 +0000
|
|
Subject: [PATCH 157/454] add gpio-key overlay (#2329)
|
|
|
|
An overlay that allows a Linux key to be bound to a GPIO.
|
|
---
|
|
arch/arm/boot/dts/overlays/Makefile | 1 +
|
|
arch/arm/boot/dts/overlays/README | 21 ++++++++
|
|
.../boot/dts/overlays/gpio-key-overlay.dts | 48 +++++++++++++++++++
|
|
3 files changed, 70 insertions(+)
|
|
create mode 100644 arch/arm/boot/dts/overlays/gpio-key-overlay.dts
|
|
|
|
--- a/arch/arm/boot/dts/overlays/Makefile
|
|
+++ b/arch/arm/boot/dts/overlays/Makefile
|
|
@@ -31,6 +31,7 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \
|
|
googlevoicehat-soundcard.dtbo \
|
|
gpio-ir.dtbo \
|
|
gpio-ir-tx.dtbo \
|
|
+ gpio-key.dtbo \
|
|
gpio-poweroff.dtbo \
|
|
gpio-shutdown.dtbo \
|
|
hifiberry-amp.dtbo \
|
|
--- a/arch/arm/boot/dts/overlays/README
|
|
+++ b/arch/arm/boot/dts/overlays/README
|
|
@@ -515,6 +515,27 @@ Params: gpio_pin Output G
|
|
Default is "0" (active-high).
|
|
|
|
|
|
+Name: gpio-key
|
|
+Info: This is a generic overlay for activating GPIO keypresses using
|
|
+ the gpio-keys library and this dtoverlay. Multiple keys can be
|
|
+ set up using multiple calls to the overlay for configuring
|
|
+ additional buttons or joysticks. You can see available keycodes
|
|
+ at https://github.com/torvalds/linux/blob/v4.12/include/uapi/
|
|
+ linux/input-event-codes.h#L64
|
|
+Load: dtoverlay=gpio-key,<param>=<val>
|
|
+Params: gpio GPIO pin to trigger on (default 3)
|
|
+ active_low When this is 1 (active low), a falling
|
|
+ edge generates a key down event and a
|
|
+ rising edge generates a key up event.
|
|
+ When this is 0 (active high), this is
|
|
+ reversed. The default is 1 (active low)
|
|
+ gpio_pull Desired pull-up/down state (off, down, up)
|
|
+ Default is "up". Note that the default pin
|
|
+ (GPIO3) has an external pullup
|
|
+ label Set a label for the key
|
|
+ keycode Set the key code for the button
|
|
+
|
|
+
|
|
Name: gpio-poweroff
|
|
Info: Drives a GPIO high or low on poweroff (including halt). Enabling this
|
|
overlay will prevent the ability to boot by driving GPIO3 low.
|
|
--- /dev/null
|
|
+++ b/arch/arm/boot/dts/overlays/gpio-key-overlay.dts
|
|
@@ -0,0 +1,48 @@
|
|
+// Definitions for gpio-key module
|
|
+/dts-v1/;
|
|
+/plugin/;
|
|
+
|
|
+/ {
|
|
+ compatible = "brcm,bcm2708";
|
|
+
|
|
+ fragment@0 {
|
|
+ // Configure the gpio pin controller
|
|
+ target = <&gpio>;
|
|
+ __overlay__ {
|
|
+ pin_state: button_pins@0 {
|
|
+ brcm,pins = <3>; // gpio number
|
|
+ brcm,function = <0>; // 0 = input, 1 = output
|
|
+ brcm,pull = <2>; // 0 = none, 1 = pull down, 2 = pull up
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+ fragment@1 {
|
|
+ target-path = "/";
|
|
+ __overlay__ {
|
|
+ button: button@0 {
|
|
+ compatible = "gpio-keys";
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&pin_state>;
|
|
+ status = "okay";
|
|
+
|
|
+ key: key {
|
|
+ linux,code = <116>;
|
|
+ gpios = <&gpio 3 1>;
|
|
+ label = "KEY_POWER";
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+
|
|
+ __overrides__ {
|
|
+ gpio = <&key>,"gpios:4",
|
|
+ <&button>,"reg:0",
|
|
+ <&pin_state>,"brcm,pins:0",
|
|
+ <&pin_state>,"reg:0";
|
|
+ label = <&key>,"label";
|
|
+ keycode = <&key>,"linux,code:0";
|
|
+ gpio_pull = <&pin_state>,"brcm,pull:0";
|
|
+ active_low = <&key>,"gpios:8";
|
|
+ };
|
|
+
|
|
+};
|
|
|