You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
748 lines
24 KiB
748 lines
24 KiB
--- a/drivers/net/ethernet/broadcom/Kconfig
|
|
+++ b/drivers/net/ethernet/broadcom/Kconfig
|
|
@@ -23,6 +23,7 @@ config B44
|
|
depends on SSB_POSSIBLE && HAS_DMA
|
|
select SSB
|
|
select MII
|
|
+ select PHYLIB
|
|
---help---
|
|
If you have a network (Ethernet) controller of this type, say Y
|
|
or M and read the Ethernet-HOWTO, available from
|
|
--- a/drivers/net/ethernet/broadcom/bgmac.c
|
|
+++ b/drivers/net/ethernet/broadcom/bgmac.c
|
|
@@ -96,6 +96,19 @@ static void bgmac_dma_tx_enable(struct b
|
|
u32 ctl;
|
|
|
|
ctl = bgmac_read(bgmac, ring->mmio_base + BGMAC_DMA_TX_CTL);
|
|
+ if (bgmac->core->id.rev >= 4) {
|
|
+ ctl &= ~BGMAC_DMA_TX_BL_MASK;
|
|
+ ctl |= BGMAC_DMA_TX_BL_128 << BGMAC_DMA_TX_BL_SHIFT;
|
|
+
|
|
+ ctl &= ~BGMAC_DMA_TX_MR_MASK;
|
|
+ ctl |= BGMAC_DMA_TX_MR_2 << BGMAC_DMA_TX_MR_SHIFT;
|
|
+
|
|
+ ctl &= ~BGMAC_DMA_TX_PC_MASK;
|
|
+ ctl |= BGMAC_DMA_TX_PC_16 << BGMAC_DMA_TX_PC_SHIFT;
|
|
+
|
|
+ ctl &= ~BGMAC_DMA_TX_PT_MASK;
|
|
+ ctl |= BGMAC_DMA_TX_PT_8 << BGMAC_DMA_TX_PT_SHIFT;
|
|
+ }
|
|
ctl |= BGMAC_DMA_TX_ENABLE;
|
|
ctl |= BGMAC_DMA_TX_PARITY_DISABLE;
|
|
bgmac_write(bgmac, ring->mmio_base + BGMAC_DMA_TX_CTL, ctl);
|
|
@@ -240,6 +253,16 @@ static void bgmac_dma_rx_enable(struct b
|
|
u32 ctl;
|
|
|
|
ctl = bgmac_read(bgmac, ring->mmio_base + BGMAC_DMA_RX_CTL);
|
|
+ if (bgmac->core->id.rev >= 4) {
|
|
+ ctl &= ~BGMAC_DMA_RX_BL_MASK;
|
|
+ ctl |= BGMAC_DMA_RX_BL_128 << BGMAC_DMA_RX_BL_SHIFT;
|
|
+
|
|
+ ctl &= ~BGMAC_DMA_RX_PC_MASK;
|
|
+ ctl |= BGMAC_DMA_RX_PC_8 << BGMAC_DMA_RX_PC_SHIFT;
|
|
+
|
|
+ ctl &= ~BGMAC_DMA_RX_PT_MASK;
|
|
+ ctl |= BGMAC_DMA_RX_PT_1 << BGMAC_DMA_RX_PT_SHIFT;
|
|
+ }
|
|
ctl &= BGMAC_DMA_RX_ADDREXT_MASK;
|
|
ctl |= BGMAC_DMA_RX_ENABLE;
|
|
ctl |= BGMAC_DMA_RX_PARITY_DISABLE;
|
|
@@ -682,70 +705,6 @@ static int bgmac_phy_write(struct bgmac
|
|
return 0;
|
|
}
|
|
|
|
-/* http://bcm-v4.sipsolutions.net/mac-gbit/gmac/chipphyforce */
|
|
-static void bgmac_phy_force(struct bgmac *bgmac)
|
|
-{
|
|
- u16 ctl;
|
|
- u16 mask = ~(BGMAC_PHY_CTL_SPEED | BGMAC_PHY_CTL_SPEED_MSB |
|
|
- BGMAC_PHY_CTL_ANENAB | BGMAC_PHY_CTL_DUPLEX);
|
|
-
|
|
- if (bgmac->phyaddr == BGMAC_PHY_NOREGS)
|
|
- return;
|
|
-
|
|
- if (bgmac->autoneg)
|
|
- return;
|
|
-
|
|
- ctl = bgmac_phy_read(bgmac, bgmac->phyaddr, BGMAC_PHY_CTL);
|
|
- ctl &= mask;
|
|
- if (bgmac->full_duplex)
|
|
- ctl |= BGMAC_PHY_CTL_DUPLEX;
|
|
- if (bgmac->speed == BGMAC_SPEED_100)
|
|
- ctl |= BGMAC_PHY_CTL_SPEED_100;
|
|
- else if (bgmac->speed == BGMAC_SPEED_1000)
|
|
- ctl |= BGMAC_PHY_CTL_SPEED_1000;
|
|
- bgmac_phy_write(bgmac, bgmac->phyaddr, BGMAC_PHY_CTL, ctl);
|
|
-}
|
|
-
|
|
-/* http://bcm-v4.sipsolutions.net/mac-gbit/gmac/chipphyadvertise */
|
|
-static void bgmac_phy_advertise(struct bgmac *bgmac)
|
|
-{
|
|
- u16 adv;
|
|
-
|
|
- if (bgmac->phyaddr == BGMAC_PHY_NOREGS)
|
|
- return;
|
|
-
|
|
- if (!bgmac->autoneg)
|
|
- return;
|
|
-
|
|
- /* Adv selected 10/100 speeds */
|
|
- adv = bgmac_phy_read(bgmac, bgmac->phyaddr, BGMAC_PHY_ADV);
|
|
- adv &= ~(BGMAC_PHY_ADV_10HALF | BGMAC_PHY_ADV_10FULL |
|
|
- BGMAC_PHY_ADV_100HALF | BGMAC_PHY_ADV_100FULL);
|
|
- if (!bgmac->full_duplex && bgmac->speed & BGMAC_SPEED_10)
|
|
- adv |= BGMAC_PHY_ADV_10HALF;
|
|
- if (!bgmac->full_duplex && bgmac->speed & BGMAC_SPEED_100)
|
|
- adv |= BGMAC_PHY_ADV_100HALF;
|
|
- if (bgmac->full_duplex && bgmac->speed & BGMAC_SPEED_10)
|
|
- adv |= BGMAC_PHY_ADV_10FULL;
|
|
- if (bgmac->full_duplex && bgmac->speed & BGMAC_SPEED_100)
|
|
- adv |= BGMAC_PHY_ADV_100FULL;
|
|
- bgmac_phy_write(bgmac, bgmac->phyaddr, BGMAC_PHY_ADV, adv);
|
|
-
|
|
- /* Adv selected 1000 speeds */
|
|
- adv = bgmac_phy_read(bgmac, bgmac->phyaddr, BGMAC_PHY_ADV2);
|
|
- adv &= ~(BGMAC_PHY_ADV2_1000HALF | BGMAC_PHY_ADV2_1000FULL);
|
|
- if (!bgmac->full_duplex && bgmac->speed & BGMAC_SPEED_1000)
|
|
- adv |= BGMAC_PHY_ADV2_1000HALF;
|
|
- if (bgmac->full_duplex && bgmac->speed & BGMAC_SPEED_1000)
|
|
- adv |= BGMAC_PHY_ADV2_1000FULL;
|
|
- bgmac_phy_write(bgmac, bgmac->phyaddr, BGMAC_PHY_ADV2, adv);
|
|
-
|
|
- /* Restart */
|
|
- bgmac_phy_write(bgmac, bgmac->phyaddr, BGMAC_PHY_CTL,
|
|
- bgmac_phy_read(bgmac, bgmac->phyaddr, BGMAC_PHY_CTL) |
|
|
- BGMAC_PHY_CTL_RESTART);
|
|
-}
|
|
-
|
|
/* http://bcm-v4.sipsolutions.net/mac-gbit/gmac/chipphyinit */
|
|
static void bgmac_phy_init(struct bgmac *bgmac)
|
|
{
|
|
@@ -789,11 +748,9 @@ static void bgmac_phy_reset(struct bgmac
|
|
if (bgmac->phyaddr == BGMAC_PHY_NOREGS)
|
|
return;
|
|
|
|
- bgmac_phy_write(bgmac, bgmac->phyaddr, BGMAC_PHY_CTL,
|
|
- BGMAC_PHY_CTL_RESET);
|
|
+ bgmac_phy_write(bgmac, bgmac->phyaddr, MII_BMCR, BMCR_RESET);
|
|
udelay(100);
|
|
- if (bgmac_phy_read(bgmac, bgmac->phyaddr, BGMAC_PHY_CTL) &
|
|
- BGMAC_PHY_CTL_RESET)
|
|
+ if (bgmac_phy_read(bgmac, bgmac->phyaddr, MII_BMCR) & BMCR_RESET)
|
|
bgmac_err(bgmac, "PHY reset failed\n");
|
|
bgmac_phy_init(bgmac);
|
|
}
|
|
@@ -811,13 +768,13 @@ static void bgmac_cmdcfg_maskset(struct
|
|
u32 cmdcfg = bgmac_read(bgmac, BGMAC_CMDCFG);
|
|
u32 new_val = (cmdcfg & mask) | set;
|
|
|
|
- bgmac_set(bgmac, BGMAC_CMDCFG, BGMAC_CMDCFG_SR);
|
|
+ bgmac_set(bgmac, BGMAC_CMDCFG, BGMAC_CMDCFG_SR(bgmac->core->id.rev));
|
|
udelay(2);
|
|
|
|
if (new_val != cmdcfg || force)
|
|
bgmac_write(bgmac, BGMAC_CMDCFG, new_val);
|
|
|
|
- bgmac_mask(bgmac, BGMAC_CMDCFG, ~BGMAC_CMDCFG_SR);
|
|
+ bgmac_mask(bgmac, BGMAC_CMDCFG, ~BGMAC_CMDCFG_SR(bgmac->core->id.rev));
|
|
udelay(2);
|
|
}
|
|
|
|
@@ -876,31 +833,56 @@ static void bgmac_clear_mib(struct bgmac
|
|
}
|
|
|
|
/* http://bcm-v4.sipsolutions.net/mac-gbit/gmac/gmac_speed */
|
|
-static void bgmac_speed(struct bgmac *bgmac, int speed)
|
|
+static void bgmac_mac_speed(struct bgmac *bgmac)
|
|
{
|
|
u32 mask = ~(BGMAC_CMDCFG_ES_MASK | BGMAC_CMDCFG_HD);
|
|
u32 set = 0;
|
|
|
|
- if (speed & BGMAC_SPEED_10)
|
|
+ switch (bgmac->mac_speed) {
|
|
+ case SPEED_10:
|
|
set |= BGMAC_CMDCFG_ES_10;
|
|
- if (speed & BGMAC_SPEED_100)
|
|
+ break;
|
|
+ case SPEED_100:
|
|
set |= BGMAC_CMDCFG_ES_100;
|
|
- if (speed & BGMAC_SPEED_1000)
|
|
+ break;
|
|
+ case SPEED_1000:
|
|
set |= BGMAC_CMDCFG_ES_1000;
|
|
- if (!bgmac->full_duplex)
|
|
+ break;
|
|
+ case SPEED_2500:
|
|
+ set |= BGMAC_CMDCFG_ES_2500;
|
|
+ break;
|
|
+ default:
|
|
+ bgmac_err(bgmac, "Unsupported speed: %d\n", bgmac->mac_speed);
|
|
+ }
|
|
+
|
|
+ if (bgmac->mac_duplex == DUPLEX_HALF)
|
|
set |= BGMAC_CMDCFG_HD;
|
|
+
|
|
bgmac_cmdcfg_maskset(bgmac, mask, set, true);
|
|
}
|
|
|
|
static void bgmac_miiconfig(struct bgmac *bgmac)
|
|
{
|
|
- u8 imode = (bgmac_read(bgmac, BGMAC_DEV_STATUS) & BGMAC_DS_MM_MASK) >>
|
|
- BGMAC_DS_MM_SHIFT;
|
|
- if (imode == 0 || imode == 1) {
|
|
- if (bgmac->autoneg)
|
|
- bgmac_speed(bgmac, BGMAC_SPEED_100);
|
|
- else
|
|
- bgmac_speed(bgmac, bgmac->speed);
|
|
+ struct bcma_device *core = bgmac->core;
|
|
+ struct bcma_chipinfo *ci = &core->bus->chipinfo;
|
|
+ u8 imode;
|
|
+
|
|
+ if (ci->id == BCMA_CHIP_ID_BCM4707 ||
|
|
+ ci->id == BCMA_CHIP_ID_BCM53018) {
|
|
+ bcma_awrite32(core, BCMA_IOCTL,
|
|
+ bcma_aread32(core, BCMA_IOCTL) | 0x40 |
|
|
+ BGMAC_BCMA_IOCTL_SW_CLKEN);
|
|
+ bgmac->mac_speed = SPEED_2500;
|
|
+ bgmac->mac_duplex = DUPLEX_FULL;
|
|
+ bgmac_mac_speed(bgmac);
|
|
+ } else {
|
|
+ imode = (bgmac_read(bgmac, BGMAC_DEV_STATUS) &
|
|
+ BGMAC_DS_MM_MASK) >> BGMAC_DS_MM_SHIFT;
|
|
+ if (imode == 0 || imode == 1) {
|
|
+ bgmac->mac_speed = SPEED_100;
|
|
+ bgmac->mac_duplex = DUPLEX_FULL;
|
|
+ bgmac_mac_speed(bgmac);
|
|
+ }
|
|
}
|
|
}
|
|
|
|
@@ -910,7 +892,7 @@ static void bgmac_chip_reset(struct bgma
|
|
struct bcma_device *core = bgmac->core;
|
|
struct bcma_bus *bus = core->bus;
|
|
struct bcma_chipinfo *ci = &bus->chipinfo;
|
|
- u32 flags = 0;
|
|
+ u32 flags;
|
|
u32 iost;
|
|
int i;
|
|
|
|
@@ -933,26 +915,36 @@ static void bgmac_chip_reset(struct bgma
|
|
}
|
|
|
|
iost = bcma_aread32(core, BCMA_IOST);
|
|
- if ((ci->id == BCMA_CHIP_ID_BCM5357 && ci->pkg == 10) ||
|
|
+ if ((ci->id == BCMA_CHIP_ID_BCM5357 && ci->pkg == BCMA_PKG_ID_BCM47186) ||
|
|
(ci->id == BCMA_CHIP_ID_BCM4749 && ci->pkg == 10) ||
|
|
- (ci->id == BCMA_CHIP_ID_BCM53572 && ci->pkg == 9))
|
|
+ (ci->id == BCMA_CHIP_ID_BCM53572 && ci->pkg == BCMA_PKG_ID_BCM47188))
|
|
iost &= ~BGMAC_BCMA_IOST_ATTACHED;
|
|
|
|
- if (iost & BGMAC_BCMA_IOST_ATTACHED) {
|
|
- flags = BGMAC_BCMA_IOCTL_SW_CLKEN;
|
|
- if (!bgmac->has_robosw)
|
|
- flags |= BGMAC_BCMA_IOCTL_SW_RESET;
|
|
+ /* 3GMAC: for BCM4707, only do core reset at bgmac_probe() */
|
|
+ if (ci->id != BCMA_CHIP_ID_BCM4707) {
|
|
+ flags = 0;
|
|
+ if (iost & BGMAC_BCMA_IOST_ATTACHED) {
|
|
+ flags = BGMAC_BCMA_IOCTL_SW_CLKEN;
|
|
+ if (!bgmac->has_robosw)
|
|
+ flags |= BGMAC_BCMA_IOCTL_SW_RESET;
|
|
+ }
|
|
+ bcma_core_enable(core, flags);
|
|
}
|
|
|
|
- bcma_core_enable(core, flags);
|
|
-
|
|
- if (core->id.rev > 2) {
|
|
- bgmac_set(bgmac, BCMA_CLKCTLST, 1 << 8);
|
|
- bgmac_wait_value(bgmac->core, BCMA_CLKCTLST, 1 << 24, 1 << 24,
|
|
+ /* Request Misc PLL for corerev > 2 */
|
|
+ if (core->id.rev > 2 &&
|
|
+ ci->id != BCMA_CHIP_ID_BCM4707 &&
|
|
+ ci->id != BCMA_CHIP_ID_BCM53018) {
|
|
+ bgmac_set(bgmac, BCMA_CLKCTLST,
|
|
+ BGMAC_BCMA_CLKCTLST_MISC_PLL_REQ);
|
|
+ bgmac_wait_value(bgmac->core, BCMA_CLKCTLST,
|
|
+ BGMAC_BCMA_CLKCTLST_MISC_PLL_ST,
|
|
+ BGMAC_BCMA_CLKCTLST_MISC_PLL_ST,
|
|
1000);
|
|
}
|
|
|
|
- if (ci->id == BCMA_CHIP_ID_BCM5357 || ci->id == BCMA_CHIP_ID_BCM4749 ||
|
|
+ if (ci->id == BCMA_CHIP_ID_BCM5357 ||
|
|
+ ci->id == BCMA_CHIP_ID_BCM4749 ||
|
|
ci->id == BCMA_CHIP_ID_BCM53572) {
|
|
struct bcma_drv_cc *cc = &bgmac->core->bus->drv_cc;
|
|
u8 et_swtype = 0;
|
|
@@ -967,10 +959,11 @@ static void bgmac_chip_reset(struct bgma
|
|
et_swtype &= 0x0f;
|
|
et_swtype <<= 4;
|
|
sw_type = et_swtype;
|
|
- } else if (ci->id == BCMA_CHIP_ID_BCM5357 && ci->pkg == 9) {
|
|
+ } else if (ci->id == BCMA_CHIP_ID_BCM5357 && ci->pkg == BCMA_PKG_ID_BCM5358) {
|
|
sw_type = BGMAC_CHIPCTL_1_SW_TYPE_EPHYRMII;
|
|
- } else if ((ci->id != BCMA_CHIP_ID_BCM53572 && ci->pkg == 10) ||
|
|
- (ci->id == BCMA_CHIP_ID_BCM53572 && ci->pkg == 9)) {
|
|
+ } else if ((ci->id == BCMA_CHIP_ID_BCM5357 && ci->pkg == BCMA_PKG_ID_BCM47186) ||
|
|
+ (ci->id == BCMA_CHIP_ID_BCM4749 && ci->pkg == 10) ||
|
|
+ (ci->id == BCMA_CHIP_ID_BCM53572 && ci->pkg == BCMA_PKG_ID_BCM47188)) {
|
|
sw_type = BGMAC_CHIPCTL_1_IF_TYPE_RGMII |
|
|
BGMAC_CHIPCTL_1_SW_TYPE_RGMII;
|
|
}
|
|
@@ -1007,8 +1000,10 @@ static void bgmac_chip_reset(struct bgma
|
|
BGMAC_CMDCFG_PROM |
|
|
BGMAC_CMDCFG_NLC |
|
|
BGMAC_CMDCFG_CFE |
|
|
- BGMAC_CMDCFG_SR,
|
|
+ BGMAC_CMDCFG_SR(core->id.rev),
|
|
false);
|
|
+ bgmac->mac_speed = SPEED_UNKNOWN;
|
|
+ bgmac->mac_duplex = DUPLEX_UNKNOWN;
|
|
|
|
bgmac_clear_mib(bgmac);
|
|
if (core->id.id == BCMA_CORE_4706_MAC_GBIT)
|
|
@@ -1048,7 +1043,7 @@ static void bgmac_enable(struct bgmac *b
|
|
|
|
cmdcfg = bgmac_read(bgmac, BGMAC_CMDCFG);
|
|
bgmac_cmdcfg_maskset(bgmac, ~(BGMAC_CMDCFG_TE | BGMAC_CMDCFG_RE),
|
|
- BGMAC_CMDCFG_SR, true);
|
|
+ BGMAC_CMDCFG_SR(bgmac->core->id.rev), true);
|
|
udelay(2);
|
|
cmdcfg |= BGMAC_CMDCFG_TE | BGMAC_CMDCFG_RE;
|
|
bgmac_write(bgmac, BGMAC_CMDCFG, cmdcfg);
|
|
@@ -1077,12 +1072,16 @@ static void bgmac_enable(struct bgmac *b
|
|
break;
|
|
}
|
|
|
|
- rxq_ctl = bgmac_read(bgmac, BGMAC_RXQ_CTL);
|
|
- rxq_ctl &= ~BGMAC_RXQ_CTL_MDP_MASK;
|
|
- bp_clk = bcma_pmu_get_bus_clock(&bgmac->core->bus->drv_cc) / 1000000;
|
|
- mdp = (bp_clk * 128 / 1000) - 3;
|
|
- rxq_ctl |= (mdp << BGMAC_RXQ_CTL_MDP_SHIFT);
|
|
- bgmac_write(bgmac, BGMAC_RXQ_CTL, rxq_ctl);
|
|
+ if (ci->id != BCMA_CHIP_ID_BCM4707 &&
|
|
+ ci->id != BCMA_CHIP_ID_BCM53018) {
|
|
+ rxq_ctl = bgmac_read(bgmac, BGMAC_RXQ_CTL);
|
|
+ rxq_ctl &= ~BGMAC_RXQ_CTL_MDP_MASK;
|
|
+ bp_clk = bcma_pmu_get_bus_clock(&bgmac->core->bus->drv_cc) /
|
|
+ 1000000;
|
|
+ mdp = (bp_clk * 128 / 1000) - 3;
|
|
+ rxq_ctl |= (mdp << BGMAC_RXQ_CTL_MDP_SHIFT);
|
|
+ bgmac_write(bgmac, BGMAC_RXQ_CTL, rxq_ctl);
|
|
+ }
|
|
}
|
|
|
|
/* http://bcm-v4.sipsolutions.net/mac-gbit/gmac/chipinit */
|
|
@@ -1108,13 +1107,6 @@ static void bgmac_chip_init(struct bgmac
|
|
|
|
bgmac_write(bgmac, BGMAC_RXMAX_LENGTH, 32 + ETHER_MAX_LEN);
|
|
|
|
- if (!bgmac->autoneg) {
|
|
- bgmac_speed(bgmac, bgmac->speed);
|
|
- bgmac_phy_force(bgmac);
|
|
- } else if (bgmac->speed) { /* if there is anything to adv */
|
|
- bgmac_phy_advertise(bgmac);
|
|
- }
|
|
-
|
|
if (full_init) {
|
|
bgmac_dma_init(bgmac);
|
|
if (1) /* FIXME: is there any case we don't want IRQs? */
|
|
@@ -1204,6 +1196,8 @@ static int bgmac_open(struct net_device
|
|
}
|
|
napi_enable(&bgmac->napi);
|
|
|
|
+ phy_start(bgmac->phy_dev);
|
|
+
|
|
netif_carrier_on(net_dev);
|
|
|
|
err_out:
|
|
@@ -1216,6 +1210,8 @@ static int bgmac_stop(struct net_device
|
|
|
|
netif_carrier_off(net_dev);
|
|
|
|
+ phy_stop(bgmac->phy_dev);
|
|
+
|
|
napi_disable(&bgmac->napi);
|
|
bgmac_chip_intrs_off(bgmac);
|
|
free_irq(bgmac->core->irq, net_dev);
|
|
@@ -1252,27 +1248,11 @@ static int bgmac_set_mac_address(struct
|
|
static int bgmac_ioctl(struct net_device *net_dev, struct ifreq *ifr, int cmd)
|
|
{
|
|
struct bgmac *bgmac = netdev_priv(net_dev);
|
|
- struct mii_ioctl_data *data = if_mii(ifr);
|
|
|
|
- switch (cmd) {
|
|
- case SIOCGMIIPHY:
|
|
- data->phy_id = bgmac->phyaddr;
|
|
- /* fallthru */
|
|
- case SIOCGMIIREG:
|
|
- if (!netif_running(net_dev))
|
|
- return -EAGAIN;
|
|
- data->val_out = bgmac_phy_read(bgmac, data->phy_id,
|
|
- data->reg_num & 0x1f);
|
|
- return 0;
|
|
- case SIOCSMIIREG:
|
|
- if (!netif_running(net_dev))
|
|
- return -EAGAIN;
|
|
- bgmac_phy_write(bgmac, data->phy_id, data->reg_num & 0x1f,
|
|
- data->val_in);
|
|
- return 0;
|
|
- default:
|
|
- return -EOPNOTSUPP;
|
|
- }
|
|
+ if (!netif_running(net_dev))
|
|
+ return -EINVAL;
|
|
+
|
|
+ return phy_mii_ioctl(bgmac->phy_dev, ifr, cmd);
|
|
}
|
|
|
|
static const struct net_device_ops bgmac_netdev_ops = {
|
|
@@ -1294,61 +1274,16 @@ static int bgmac_get_settings(struct net
|
|
{
|
|
struct bgmac *bgmac = netdev_priv(net_dev);
|
|
|
|
- cmd->supported = SUPPORTED_10baseT_Half |
|
|
- SUPPORTED_10baseT_Full |
|
|
- SUPPORTED_100baseT_Half |
|
|
- SUPPORTED_100baseT_Full |
|
|
- SUPPORTED_1000baseT_Half |
|
|
- SUPPORTED_1000baseT_Full |
|
|
- SUPPORTED_Autoneg;
|
|
-
|
|
- if (bgmac->autoneg) {
|
|
- WARN_ON(cmd->advertising);
|
|
- if (bgmac->full_duplex) {
|
|
- if (bgmac->speed & BGMAC_SPEED_10)
|
|
- cmd->advertising |= ADVERTISED_10baseT_Full;
|
|
- if (bgmac->speed & BGMAC_SPEED_100)
|
|
- cmd->advertising |= ADVERTISED_100baseT_Full;
|
|
- if (bgmac->speed & BGMAC_SPEED_1000)
|
|
- cmd->advertising |= ADVERTISED_1000baseT_Full;
|
|
- } else {
|
|
- if (bgmac->speed & BGMAC_SPEED_10)
|
|
- cmd->advertising |= ADVERTISED_10baseT_Half;
|
|
- if (bgmac->speed & BGMAC_SPEED_100)
|
|
- cmd->advertising |= ADVERTISED_100baseT_Half;
|
|
- if (bgmac->speed & BGMAC_SPEED_1000)
|
|
- cmd->advertising |= ADVERTISED_1000baseT_Half;
|
|
- }
|
|
- } else {
|
|
- switch (bgmac->speed) {
|
|
- case BGMAC_SPEED_10:
|
|
- ethtool_cmd_speed_set(cmd, SPEED_10);
|
|
- break;
|
|
- case BGMAC_SPEED_100:
|
|
- ethtool_cmd_speed_set(cmd, SPEED_100);
|
|
- break;
|
|
- case BGMAC_SPEED_1000:
|
|
- ethtool_cmd_speed_set(cmd, SPEED_1000);
|
|
- break;
|
|
- }
|
|
- }
|
|
-
|
|
- cmd->duplex = bgmac->full_duplex ? DUPLEX_FULL : DUPLEX_HALF;
|
|
-
|
|
- cmd->autoneg = bgmac->autoneg;
|
|
-
|
|
- return 0;
|
|
+ return phy_ethtool_gset(bgmac->phy_dev, cmd);
|
|
}
|
|
|
|
-#if 0
|
|
static int bgmac_set_settings(struct net_device *net_dev,
|
|
struct ethtool_cmd *cmd)
|
|
{
|
|
struct bgmac *bgmac = netdev_priv(net_dev);
|
|
|
|
- return -1;
|
|
+ return phy_ethtool_sset(bgmac->phy_dev, cmd);
|
|
}
|
|
-#endif
|
|
|
|
static void bgmac_get_drvinfo(struct net_device *net_dev,
|
|
struct ethtool_drvinfo *info)
|
|
@@ -1359,6 +1294,7 @@ static void bgmac_get_drvinfo(struct net
|
|
|
|
static const struct ethtool_ops bgmac_ethtool_ops = {
|
|
.get_settings = bgmac_get_settings,
|
|
+ .set_settings = bgmac_set_settings,
|
|
.get_drvinfo = bgmac_get_drvinfo,
|
|
};
|
|
|
|
@@ -1377,9 +1313,35 @@ static int bgmac_mii_write(struct mii_bu
|
|
return bgmac_phy_write(bus->priv, mii_id, regnum, value);
|
|
}
|
|
|
|
+static void bgmac_adjust_link(struct net_device *net_dev)
|
|
+{
|
|
+ struct bgmac *bgmac = netdev_priv(net_dev);
|
|
+ struct phy_device *phy_dev = bgmac->phy_dev;
|
|
+ bool update = false;
|
|
+
|
|
+ if (phy_dev->link) {
|
|
+ if (phy_dev->speed != bgmac->mac_speed) {
|
|
+ bgmac->mac_speed = phy_dev->speed;
|
|
+ update = true;
|
|
+ }
|
|
+
|
|
+ if (phy_dev->duplex != bgmac->mac_duplex) {
|
|
+ bgmac->mac_duplex = phy_dev->duplex;
|
|
+ update = true;
|
|
+ }
|
|
+ }
|
|
+
|
|
+ if (update) {
|
|
+ bgmac_mac_speed(bgmac);
|
|
+ phy_print_status(phy_dev);
|
|
+ }
|
|
+}
|
|
+
|
|
static int bgmac_mii_register(struct bgmac *bgmac)
|
|
{
|
|
struct mii_bus *mii_bus;
|
|
+ struct phy_device *phy_dev;
|
|
+ char bus_id[MII_BUS_ID_SIZE + 3];
|
|
int i, err = 0;
|
|
|
|
mii_bus = mdiobus_alloc();
|
|
@@ -1411,8 +1373,22 @@ static int bgmac_mii_register(struct bgm
|
|
|
|
bgmac->mii_bus = mii_bus;
|
|
|
|
+ /* Connect to the PHY */
|
|
+ snprintf(bus_id, sizeof(bus_id), PHY_ID_FMT, mii_bus->id,
|
|
+ bgmac->phyaddr);
|
|
+ phy_dev = phy_connect(bgmac->net_dev, bus_id, &bgmac_adjust_link,
|
|
+ PHY_INTERFACE_MODE_MII);
|
|
+ if (IS_ERR(phy_dev)) {
|
|
+ bgmac_err(bgmac, "PHY connecton failed\n");
|
|
+ err = PTR_ERR(phy_dev);
|
|
+ goto err_unregister_bus;
|
|
+ }
|
|
+ bgmac->phy_dev = phy_dev;
|
|
+
|
|
return err;
|
|
|
|
+err_unregister_bus:
|
|
+ mdiobus_unregister(mii_bus);
|
|
err_free_irq:
|
|
kfree(mii_bus->irq);
|
|
err_free_bus:
|
|
@@ -1467,9 +1443,6 @@ static int bgmac_probe(struct bcma_devic
|
|
bcma_set_drvdata(core, bgmac);
|
|
|
|
/* Defaults */
|
|
- bgmac->autoneg = true;
|
|
- bgmac->full_duplex = true;
|
|
- bgmac->speed = BGMAC_SPEED_10 | BGMAC_SPEED_100 | BGMAC_SPEED_1000;
|
|
memcpy(bgmac->net_dev->dev_addr, mac, ETH_ALEN);
|
|
|
|
/* On BCM4706 we need common core to access PHY */
|
|
@@ -1500,6 +1473,27 @@ static int bgmac_probe(struct bcma_devic
|
|
|
|
bgmac_chip_reset(bgmac);
|
|
|
|
+ /* For Northstar, we have to take all GMAC core out of reset */
|
|
+ if (core->id.id == BCMA_CHIP_ID_BCM4707 ||
|
|
+ core->id.id == BCMA_CHIP_ID_BCM53018) {
|
|
+ struct bcma_device *ns_core;
|
|
+ int ns_gmac;
|
|
+
|
|
+ /* Northstar has 4 GMAC cores */
|
|
+ for (ns_gmac = 0; ns_gmac < 4; ns_gmac++) {
|
|
+ /* As Northstar requirement, we have to reset all GMACs
|
|
+ * before accessing one. bgmac_chip_reset() call
|
|
+ * bcma_core_enable() for this core. Then the other
|
|
+ * three GMACs didn't reset. We do it here.
|
|
+ */
|
|
+ ns_core = bcma_find_core_unit(core->bus,
|
|
+ BCMA_CORE_MAC_GBIT,
|
|
+ ns_gmac);
|
|
+ if (ns_core && !bcma_core_is_enabled(ns_core))
|
|
+ bcma_core_enable(ns_core, 0);
|
|
+ }
|
|
+ }
|
|
+
|
|
err = bgmac_dma_alloc(bgmac);
|
|
if (err) {
|
|
bgmac_err(bgmac, "Unable to alloc memory for DMA\n");
|
|
@@ -1524,14 +1518,12 @@ static int bgmac_probe(struct bcma_devic
|
|
err = bgmac_mii_register(bgmac);
|
|
if (err) {
|
|
bgmac_err(bgmac, "Cannot register MDIO\n");
|
|
- err = -ENOTSUPP;
|
|
goto err_dma_free;
|
|
}
|
|
|
|
err = register_netdev(bgmac->net_dev);
|
|
if (err) {
|
|
bgmac_err(bgmac, "Cannot register net device\n");
|
|
- err = -ENOTSUPP;
|
|
goto err_mii_unregister;
|
|
}
|
|
|
|
--- a/drivers/net/ethernet/broadcom/bgmac.h
|
|
+++ b/drivers/net/ethernet/broadcom/bgmac.h
|
|
@@ -95,7 +95,11 @@
|
|
#define BGMAC_RXQ_CTL_MDP_SHIFT 24
|
|
#define BGMAC_GPIO_SELECT 0x194
|
|
#define BGMAC_GPIO_OUTPUT_EN 0x198
|
|
-/* For 0x1e0 see BCMA_CLKCTLST */
|
|
+
|
|
+/* For 0x1e0 see BCMA_CLKCTLST. Below are BGMAC specific bits */
|
|
+#define BGMAC_BCMA_CLKCTLST_MISC_PLL_REQ 0x00000100
|
|
+#define BGMAC_BCMA_CLKCTLST_MISC_PLL_ST 0x01000000
|
|
+
|
|
#define BGMAC_HW_WAR 0x1e4
|
|
#define BGMAC_PWR_CTL 0x1e8
|
|
#define BGMAC_DMA_BASE0 0x200 /* Tx and Rx controller */
|
|
@@ -185,6 +189,7 @@
|
|
#define BGMAC_CMDCFG_ES_10 0x00000000
|
|
#define BGMAC_CMDCFG_ES_100 0x00000004
|
|
#define BGMAC_CMDCFG_ES_1000 0x00000008
|
|
+#define BGMAC_CMDCFG_ES_2500 0x0000000C
|
|
#define BGMAC_CMDCFG_PROM 0x00000010 /* Set to activate promiscuous mode */
|
|
#define BGMAC_CMDCFG_PAD_EN 0x00000020
|
|
#define BGMAC_CMDCFG_CF 0x00000040
|
|
@@ -193,7 +198,9 @@
|
|
#define BGMAC_CMDCFG_TAI 0x00000200
|
|
#define BGMAC_CMDCFG_HD 0x00000400 /* Set if in half duplex mode */
|
|
#define BGMAC_CMDCFG_HD_SHIFT 10
|
|
-#define BGMAC_CMDCFG_SR 0x00000800 /* Set to reset mode */
|
|
+#define BGMAC_CMDCFG_SR_REV0 0x00000800 /* Set to reset mode, for other revs */
|
|
+#define BGMAC_CMDCFG_SR_REV4 0x00002000 /* Set to reset mode, only for core rev 4 */
|
|
+#define BGMAC_CMDCFG_SR(rev) ((rev == 4) ? BGMAC_CMDCFG_SR_REV4 : BGMAC_CMDCFG_SR_REV0)
|
|
#define BGMAC_CMDCFG_ML 0x00008000 /* Set to activate mac loopback mode */
|
|
#define BGMAC_CMDCFG_AE 0x00400000
|
|
#define BGMAC_CMDCFG_CFE 0x00800000
|
|
@@ -216,27 +223,6 @@
|
|
#define BGMAC_RX_STATUS 0xb38
|
|
#define BGMAC_TX_STATUS 0xb3c
|
|
|
|
-#define BGMAC_PHY_CTL 0x00
|
|
-#define BGMAC_PHY_CTL_SPEED_MSB 0x0040
|
|
-#define BGMAC_PHY_CTL_DUPLEX 0x0100 /* duplex mode */
|
|
-#define BGMAC_PHY_CTL_RESTART 0x0200 /* restart autonegotiation */
|
|
-#define BGMAC_PHY_CTL_ANENAB 0x1000 /* enable autonegotiation */
|
|
-#define BGMAC_PHY_CTL_SPEED 0x2000
|
|
-#define BGMAC_PHY_CTL_LOOP 0x4000 /* loopback */
|
|
-#define BGMAC_PHY_CTL_RESET 0x8000 /* reset */
|
|
-/* Helpers */
|
|
-#define BGMAC_PHY_CTL_SPEED_10 0
|
|
-#define BGMAC_PHY_CTL_SPEED_100 BGMAC_PHY_CTL_SPEED
|
|
-#define BGMAC_PHY_CTL_SPEED_1000 BGMAC_PHY_CTL_SPEED_MSB
|
|
-#define BGMAC_PHY_ADV 0x04
|
|
-#define BGMAC_PHY_ADV_10HALF 0x0020 /* advertise 10MBits/s half duplex */
|
|
-#define BGMAC_PHY_ADV_10FULL 0x0040 /* advertise 10MBits/s full duplex */
|
|
-#define BGMAC_PHY_ADV_100HALF 0x0080 /* advertise 100MBits/s half duplex */
|
|
-#define BGMAC_PHY_ADV_100FULL 0x0100 /* advertise 100MBits/s full duplex */
|
|
-#define BGMAC_PHY_ADV2 0x09
|
|
-#define BGMAC_PHY_ADV2_1000HALF 0x0100 /* advertise 1000MBits/s half duplex */
|
|
-#define BGMAC_PHY_ADV2_1000FULL 0x0200 /* advertise 1000MBits/s full duplex */
|
|
-
|
|
/* BCMA GMAC core specific IO Control (BCMA_IOCTL) flags */
|
|
#define BGMAC_BCMA_IOCTL_SW_CLKEN 0x00000004 /* PHY Clock Enable */
|
|
#define BGMAC_BCMA_IOCTL_SW_RESET 0x00000008 /* PHY Reset */
|
|
@@ -254,9 +240,34 @@
|
|
#define BGMAC_DMA_TX_SUSPEND 0x00000002
|
|
#define BGMAC_DMA_TX_LOOPBACK 0x00000004
|
|
#define BGMAC_DMA_TX_FLUSH 0x00000010
|
|
+#define BGMAC_DMA_TX_MR_MASK 0x000000C0 /* Multiple outstanding reads */
|
|
+#define BGMAC_DMA_TX_MR_SHIFT 6
|
|
+#define BGMAC_DMA_TX_MR_1 0
|
|
+#define BGMAC_DMA_TX_MR_2 1
|
|
#define BGMAC_DMA_TX_PARITY_DISABLE 0x00000800
|
|
#define BGMAC_DMA_TX_ADDREXT_MASK 0x00030000
|
|
#define BGMAC_DMA_TX_ADDREXT_SHIFT 16
|
|
+#define BGMAC_DMA_TX_BL_MASK 0x001C0000 /* BurstLen bits */
|
|
+#define BGMAC_DMA_TX_BL_SHIFT 18
|
|
+#define BGMAC_DMA_TX_BL_16 0
|
|
+#define BGMAC_DMA_TX_BL_32 1
|
|
+#define BGMAC_DMA_TX_BL_64 2
|
|
+#define BGMAC_DMA_TX_BL_128 3
|
|
+#define BGMAC_DMA_TX_BL_256 4
|
|
+#define BGMAC_DMA_TX_BL_512 5
|
|
+#define BGMAC_DMA_TX_BL_1024 6
|
|
+#define BGMAC_DMA_TX_PC_MASK 0x00E00000 /* Prefetch control */
|
|
+#define BGMAC_DMA_TX_PC_SHIFT 21
|
|
+#define BGMAC_DMA_TX_PC_0 0
|
|
+#define BGMAC_DMA_TX_PC_4 1
|
|
+#define BGMAC_DMA_TX_PC_8 2
|
|
+#define BGMAC_DMA_TX_PC_16 3
|
|
+#define BGMAC_DMA_TX_PT_MASK 0x03000000 /* Prefetch threshold */
|
|
+#define BGMAC_DMA_TX_PT_SHIFT 24
|
|
+#define BGMAC_DMA_TX_PT_1 0
|
|
+#define BGMAC_DMA_TX_PT_2 1
|
|
+#define BGMAC_DMA_TX_PT_4 2
|
|
+#define BGMAC_DMA_TX_PT_8 3
|
|
#define BGMAC_DMA_TX_INDEX 0x04
|
|
#define BGMAC_DMA_TX_RINGLO 0x08
|
|
#define BGMAC_DMA_TX_RINGHI 0x0C
|
|
@@ -284,8 +295,33 @@
|
|
#define BGMAC_DMA_RX_DIRECT_FIFO 0x00000100
|
|
#define BGMAC_DMA_RX_OVERFLOW_CONT 0x00000400
|
|
#define BGMAC_DMA_RX_PARITY_DISABLE 0x00000800
|
|
+#define BGMAC_DMA_RX_MR_MASK 0x000000C0 /* Multiple outstanding reads */
|
|
+#define BGMAC_DMA_RX_MR_SHIFT 6
|
|
+#define BGMAC_DMA_TX_MR_1 0
|
|
+#define BGMAC_DMA_TX_MR_2 1
|
|
#define BGMAC_DMA_RX_ADDREXT_MASK 0x00030000
|
|
#define BGMAC_DMA_RX_ADDREXT_SHIFT 16
|
|
+#define BGMAC_DMA_RX_BL_MASK 0x001C0000 /* BurstLen bits */
|
|
+#define BGMAC_DMA_RX_BL_SHIFT 18
|
|
+#define BGMAC_DMA_RX_BL_16 0
|
|
+#define BGMAC_DMA_RX_BL_32 1
|
|
+#define BGMAC_DMA_RX_BL_64 2
|
|
+#define BGMAC_DMA_RX_BL_128 3
|
|
+#define BGMAC_DMA_RX_BL_256 4
|
|
+#define BGMAC_DMA_RX_BL_512 5
|
|
+#define BGMAC_DMA_RX_BL_1024 6
|
|
+#define BGMAC_DMA_RX_PC_MASK 0x00E00000 /* Prefetch control */
|
|
+#define BGMAC_DMA_RX_PC_SHIFT 21
|
|
+#define BGMAC_DMA_RX_PC_0 0
|
|
+#define BGMAC_DMA_RX_PC_4 1
|
|
+#define BGMAC_DMA_RX_PC_8 2
|
|
+#define BGMAC_DMA_RX_PC_16 3
|
|
+#define BGMAC_DMA_RX_PT_MASK 0x03000000 /* Prefetch threshold */
|
|
+#define BGMAC_DMA_RX_PT_SHIFT 24
|
|
+#define BGMAC_DMA_RX_PT_1 0
|
|
+#define BGMAC_DMA_RX_PT_2 1
|
|
+#define BGMAC_DMA_RX_PT_4 2
|
|
+#define BGMAC_DMA_RX_PT_8 3
|
|
#define BGMAC_DMA_RX_INDEX 0x24
|
|
#define BGMAC_DMA_RX_RINGLO 0x28
|
|
#define BGMAC_DMA_RX_RINGHI 0x2C
|
|
@@ -342,10 +378,6 @@
|
|
#define BGMAC_CHIPCTL_1_SW_TYPE_RGMII 0x000000C0
|
|
#define BGMAC_CHIPCTL_1_RXC_DLL_BYPASS 0x00010000
|
|
|
|
-#define BGMAC_SPEED_10 0x0001
|
|
-#define BGMAC_SPEED_100 0x0002
|
|
-#define BGMAC_SPEED_1000 0x0004
|
|
-
|
|
#define BGMAC_WEIGHT 64
|
|
|
|
#define ETHER_MAX_LEN 1518
|
|
@@ -402,6 +434,7 @@ struct bgmac {
|
|
struct net_device *net_dev;
|
|
struct napi_struct napi;
|
|
struct mii_bus *mii_bus;
|
|
+ struct phy_device *phy_dev;
|
|
|
|
/* DMA */
|
|
struct bgmac_dma_ring tx_ring[BGMAC_MAX_TX_RINGS];
|
|
@@ -416,10 +449,9 @@ struct bgmac {
|
|
u32 int_mask;
|
|
u32 int_status;
|
|
|
|
- /* Speed-related */
|
|
- int speed;
|
|
- bool autoneg;
|
|
- bool full_duplex;
|
|
+ /* Current MAC state */
|
|
+ int mac_speed;
|
|
+ int mac_duplex;
|
|
|
|
u8 phyaddr;
|
|
bool has_robosw;
|
|
|