You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
freifunkist-firmware/target/linux/brcm2708/patches-4.14/950-0245-irqchip-bcm2836-Mo...

314 lines
9.4 KiB

From 827d93b06aefb4fd03f9a6a0c3774a14fd5bd291 Mon Sep 17 00:00:00 2001
From: Stefan Wahren <stefan.wahren@i2se.com>
Date: Sun, 6 Aug 2017 17:52:02 +0200
Subject: [PATCH 245/454] irqchip: bcm2836: Move SMP startup code to arch/arm
(v2)
commit 88bbe85dcd37aa2662c1a83962c15009fc12503e upstream.
In order to easily provide SMP for BCM2837 on 32-bit and 64-bit
the SMP startup code was placed in irq-bcm2836. That's not the
right approach. So move this code where it belongs.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Fixes: 41f4988cc287 ("irqchip/bcm2836: Add SMP support for the 2836")
Tested-by: Eric Anholt <eric@anholt.net>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
---
arch/arm/mach-bcm/Makefile | 5 ++
arch/arm/mach-bcm/board_bcm2835.c | 5 +-
arch/arm/mach-bcm/platsmp.c | 35 ++++++++++++
arch/arm/mach-bcm/platsmp.h | 10 ++++
drivers/irqchip/irq-bcm2836.c | 82 +----------------------------
include/linux/irqchip/irq-bcm2836.h | 70 ++++++++++++++++++++++++
6 files changed, 126 insertions(+), 81 deletions(-)
create mode 100644 arch/arm/mach-bcm/platsmp.h
create mode 100644 include/linux/irqchip/irq-bcm2836.h
--- a/arch/arm/mach-bcm/Makefile
+++ b/arch/arm/mach-bcm/Makefile
@@ -43,6 +43,11 @@ endif
# BCM2835
obj-$(CONFIG_ARCH_BCM2835) += board_bcm2835.o
+ifeq ($(CONFIG_ARCH_BCM2835),y)
+ifeq ($(CONFIG_ARM),y)
+obj-$(CONFIG_SMP) += platsmp.o
+endif
+endif
# BCM5301X
obj-$(CONFIG_ARCH_BCM_5301X) += bcm_5301x.o
--- a/arch/arm/mach-bcm/board_bcm2835.c
+++ b/arch/arm/mach-bcm/board_bcm2835.c
@@ -21,6 +21,7 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
+#include "platsmp.h"
#include <linux/dma-mapping.h>
static void __init bcm2835_init(void)
@@ -49,6 +50,7 @@ static const char * const bcm2835_compat
#endif
#ifdef CONFIG_ARCH_MULTI_V7
"brcm,bcm2836",
+ "brcm,bcm2837",
#endif
NULL
};
@@ -56,5 +58,6 @@ static const char * const bcm2835_compat
DT_MACHINE_START(BCM2835, "BCM2835")
.init_machine = bcm2835_init,
.init_early = bcm2835_init_early,
- .dt_compat = bcm2835_compat
+ .dt_compat = bcm2835_compat,
+ .smp = smp_ops(bcm2836_smp_ops),
MACHINE_END
--- a/arch/arm/mach-bcm/platsmp.c
+++ b/arch/arm/mach-bcm/platsmp.c
@@ -17,6 +17,7 @@
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/io.h>
+#include <linux/irqchip/irq-bcm2836.h>
#include <linux/jiffies.h>
#include <linux/of.h>
#include <linux/of_address.h>
@@ -287,6 +288,35 @@ out:
return ret;
}
+static int bcm2836_boot_secondary(unsigned int cpu, struct task_struct *idle)
+{
+ void __iomem *intc_base;
+ struct device_node *dn;
+ char *name;
+
+ name = "brcm,bcm2836-l1-intc";
+ dn = of_find_compatible_node(NULL, NULL, name);
+ if (!dn) {
+ pr_err("unable to find intc node\n");
+ return -ENODEV;
+ }
+
+ intc_base = of_iomap(dn, 0);
+ of_node_put(dn);
+
+ if (!intc_base) {
+ pr_err("unable to remap intc base register\n");
+ return -ENOMEM;
+ }
+
+ writel(virt_to_phys(secondary_startup),
+ intc_base + LOCAL_MAILBOX3_SET0 + 16 * cpu);
+
+ iounmap(intc_base);
+
+ return 0;
+}
+
static const struct smp_operations kona_smp_ops __initconst = {
.smp_prepare_cpus = bcm_smp_prepare_cpus,
.smp_boot_secondary = kona_boot_secondary,
@@ -305,3 +335,8 @@ static const struct smp_operations nsp_s
.smp_boot_secondary = nsp_boot_secondary,
};
CPU_METHOD_OF_DECLARE(bcm_smp_nsp, "brcm,bcm-nsp-smp", &nsp_smp_ops);
+
+const struct smp_operations bcm2836_smp_ops __initconst = {
+ .smp_boot_secondary = bcm2836_boot_secondary,
+};
+CPU_METHOD_OF_DECLARE(bcm_smp_bcm2836, "brcm,bcm2836-smp", &bcm2836_smp_ops);
--- /dev/null
+++ b/arch/arm/mach-bcm/platsmp.h
@@ -0,0 +1,10 @@
+/*
+ * Copyright (C) 2017 Stefan Wahren <stefan.wahren@i2se.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ */
+
+extern const struct smp_operations bcm2836_smp_ops;
--- a/drivers/irqchip/irq-bcm2836.c
+++ b/drivers/irqchip/irq-bcm2836.c
@@ -19,62 +19,9 @@
#include <linux/of_irq.h>
#include <linux/irqchip.h>
#include <linux/irqdomain.h>
-#include <asm/exception.h>
-
-#define LOCAL_CONTROL 0x000
-#define LOCAL_PRESCALER 0x008
+#include <linux/irqchip/irq-bcm2836.h>
-/*
- * The low 2 bits identify the CPU that the GPU IRQ goes to, and the
- * next 2 bits identify the CPU that the GPU FIQ goes to.
- */
-#define LOCAL_GPU_ROUTING 0x00c
-/* When setting bits 0-3, enables PMU interrupts on that CPU. */
-#define LOCAL_PM_ROUTING_SET 0x010
-/* When setting bits 0-3, disables PMU interrupts on that CPU. */
-#define LOCAL_PM_ROUTING_CLR 0x014
-/*
- * The low 4 bits of this are the CPU's timer IRQ enables, and the
- * next 4 bits are the CPU's timer FIQ enables (which override the IRQ
- * bits).
- */
-#define LOCAL_TIMER_INT_CONTROL0 0x040
-/*
- * The low 4 bits of this are the CPU's per-mailbox IRQ enables, and
- * the next 4 bits are the CPU's per-mailbox FIQ enables (which
- * override the IRQ bits).
- */
-#define LOCAL_MAILBOX_INT_CONTROL0 0x050
-/*
- * The CPU's interrupt status register. Bits are defined by the the
- * LOCAL_IRQ_* bits below.
- */
-#define LOCAL_IRQ_PENDING0 0x060
-/* Same status bits as above, but for FIQ. */
-#define LOCAL_FIQ_PENDING0 0x070
-/*
- * Mailbox write-to-set bits. There are 16 mailboxes, 4 per CPU, and
- * these bits are organized by mailbox number and then CPU number. We
- * use mailbox 0 for IPIs. The mailbox's interrupt is raised while
- * any bit is set.
- */
-#define LOCAL_MAILBOX0_SET0 0x080
-#define LOCAL_MAILBOX3_SET0 0x08c
-/* Mailbox write-to-clear bits. */
-#define LOCAL_MAILBOX0_CLR0 0x0c0
-#define LOCAL_MAILBOX3_CLR0 0x0cc
-
-#define LOCAL_IRQ_CNTPSIRQ 0
-#define LOCAL_IRQ_CNTPNSIRQ 1
-#define LOCAL_IRQ_CNTHPIRQ 2
-#define LOCAL_IRQ_CNTVIRQ 3
-#define LOCAL_IRQ_MAILBOX0 4
-#define LOCAL_IRQ_MAILBOX1 5
-#define LOCAL_IRQ_MAILBOX2 6
-#define LOCAL_IRQ_MAILBOX3 7
-#define LOCAL_IRQ_GPU_FAST 8
-#define LOCAL_IRQ_PMU_FAST 9
-#define LAST_IRQ LOCAL_IRQ_PMU_FAST
+#include <asm/exception.h>
struct bcm2836_arm_irqchip_intc {
struct irq_domain *domain;
@@ -240,27 +187,6 @@ static int bcm2836_cpu_dying(unsigned in
cpu);
return 0;
}
-
-#ifdef CONFIG_ARM
-static int __init bcm2836_smp_boot_secondary(unsigned int cpu,
- struct task_struct *idle)
-{
- unsigned long secondary_startup_phys =
- (unsigned long)virt_to_phys((void *)secondary_startup);
-
- writel(secondary_startup_phys,
- intc.base + LOCAL_MAILBOX3_SET0 + 16 * cpu);
-
- dsb(sy); /* Ensure write has completed before waking the other CPUs */
- sev();
-
- return 0;
-}
-
-static const struct smp_operations bcm2836_smp_ops __initconst = {
- .smp_boot_secondary = bcm2836_smp_boot_secondary,
-};
-#endif
#endif
static const struct irq_domain_ops bcm2836_arm_irqchip_intc_ops = {
@@ -277,10 +203,6 @@ bcm2836_arm_irqchip_smp_init(void)
bcm2836_cpu_dying);
set_smp_cross_call(bcm2836_arm_irqchip_send_ipi);
-
-#ifdef CONFIG_ARM
- smp_set_ops(&bcm2836_smp_ops);
-#endif
#endif
}
--- /dev/null
+++ b/include/linux/irqchip/irq-bcm2836.h
@@ -0,0 +1,70 @@
+/*
+ * Root interrupt controller for the BCM2836 (Raspberry Pi 2).
+ *
+ * Copyright 2015 Broadcom
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#define LOCAL_CONTROL 0x000
+#define LOCAL_PRESCALER 0x008
+
+/*
+ * The low 2 bits identify the CPU that the GPU IRQ goes to, and the
+ * next 2 bits identify the CPU that the GPU FIQ goes to.
+ */
+#define LOCAL_GPU_ROUTING 0x00c
+/* When setting bits 0-3, enables PMU interrupts on that CPU. */
+#define LOCAL_PM_ROUTING_SET 0x010
+/* When setting bits 0-3, disables PMU interrupts on that CPU. */
+#define LOCAL_PM_ROUTING_CLR 0x014
+/*
+ * The low 4 bits of this are the CPU's timer IRQ enables, and the
+ * next 4 bits are the CPU's timer FIQ enables (which override the IRQ
+ * bits).
+ */
+#define LOCAL_TIMER_INT_CONTROL0 0x040
+/*
+ * The low 4 bits of this are the CPU's per-mailbox IRQ enables, and
+ * the next 4 bits are the CPU's per-mailbox FIQ enables (which
+ * override the IRQ bits).
+ */
+#define LOCAL_MAILBOX_INT_CONTROL0 0x050
+/*
+ * The CPU's interrupt status register. Bits are defined by the the
+ * LOCAL_IRQ_* bits below.
+ */
+#define LOCAL_IRQ_PENDING0 0x060
+/* Same status bits as above, but for FIQ. */
+#define LOCAL_FIQ_PENDING0 0x070
+/*
+ * Mailbox write-to-set bits. There are 16 mailboxes, 4 per CPU, and
+ * these bits are organized by mailbox number and then CPU number. We
+ * use mailbox 0 for IPIs. The mailbox's interrupt is raised while
+ * any bit is set.
+ */
+#define LOCAL_MAILBOX0_SET0 0x080
+#define LOCAL_MAILBOX3_SET0 0x08c
+/* Mailbox write-to-clear bits. */
+#define LOCAL_MAILBOX0_CLR0 0x0c0
+#define LOCAL_MAILBOX3_CLR0 0x0cc
+
+#define LOCAL_IRQ_CNTPSIRQ 0
+#define LOCAL_IRQ_CNTPNSIRQ 1
+#define LOCAL_IRQ_CNTHPIRQ 2
+#define LOCAL_IRQ_CNTVIRQ 3
+#define LOCAL_IRQ_MAILBOX0 4
+#define LOCAL_IRQ_MAILBOX1 5
+#define LOCAL_IRQ_MAILBOX2 6
+#define LOCAL_IRQ_MAILBOX3 7
+#define LOCAL_IRQ_GPU_FAST 8
+#define LOCAL_IRQ_PMU_FAST 9
+#define LAST_IRQ LOCAL_IRQ_PMU_FAST