freifunkist-firmware

hsist

History

Adrian Schmutzler 5c5bf8b865 ar71xx: Add support for TP-Link CPE210 v2 This PR adds support for a popular low-cost 2.4GHz N based AP Specifications: - SoC: Qualcomm Atheros QCA9533 (650MHz) - RAM: 64MB - Storage: 8 MB SPI NOR - Wireless: 2.4GHz N based built into SoC 2x2 - Ethernet: 1x 100/10 Mbps, integrated into SoC, 24V POE IN Installation: Flash factory image through stock firmware WEB UI or through TFTP To get to TFTP recovery just hold reset button while powering on for around 4-5 seconds and release. Rename factory image to recovery.bin Stock TFTP server IP:192.168.0.100 Stock device TFTP adress:192.168.0.254 Notes: TP-Link does not use bootstrap registers so without this patch reference clock detects as 40MHz while it is actually 25MHz. This is due to messed up bootstrap resistor configuration on the PCB. Provided GPL code just forces 25MHz reference clock. That causes booting with completely wrong clocks, for example, CPU tries to boot at 1040MHz while the stock is 650MHz. So this PR depends on PR #672 to remove 40MHz reference clock. Thanks to Sven Eckelmann <sven@narfation.org> for properly patching that. Signed-off-by: Robert Marko <robimarko@gmail.com> Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>		6 years ago
..
base-files	ar71xx: Add support for TP-Link CPE210 v2	6 years ago
files	ar71xx: Add support for TP-Link CPE210 v2	6 years ago
generic	ar71xx: add support for Fritz!WLAN Repeater 450E	6 years ago
image	ar71xx: Add support for TP-Link CPE210 v2	6 years ago
mikrotik	ar71xx: reorganize kernel configuration	7 years ago
nand	ar71xx: reorganize kernel configuration	7 years ago
patches-4.9	ar71x: add support for Mikrotik Routerboard wAP R	6 years ago
tiny	ar71xx: create new ar71xx/tiny subtarget for 4MB flash devices	7 years ago
Makefile	ar71xx: create new ar71xx/tiny subtarget for 4MB flash devices	7 years ago
config-4.9	ar71xx: add support for Fritz!WLAN Repeater 450E	6 years ago
modules.mk	…