You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
freifunkist-firmware/target/linux/generic/hack-4.14/700-swconfig_switch_drivers...

140 lines
3.9 KiB

From 36e516290611e613aa92996cb4339561452695b4 Mon Sep 17 00:00:00 2001
From: Felix Fietkau <nbd@nbd.name>
Date: Fri, 7 Jul 2017 17:24:23 +0200
Subject: net: swconfig: adds openwrt switch layer
Signed-off-by: Felix Fietkau <nbd@nbd.name>
---
drivers/net/phy/Kconfig | 83 +++++++++++++++++++++++++++++++++++++++++++++++
drivers/net/phy/Makefile | 15 +++++++++
include/uapi/linux/Kbuild | 1 +
3 files changed, 99 insertions(+)
--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
@@ -198,6 +198,89 @@ config LED_TRIGGER_PHY
<Speed in megabits>Mbps or <Speed in gigabits>Gbps
+comment "Switch configuration API + drivers"
+
+config SWCONFIG
+ tristate "Switch configuration API"
+ ---help---
+ Switch configuration API using netlink. This allows
+ you to configure the VLAN features of certain switches.
+
+config SWCONFIG_LEDS
+ bool "Switch LED trigger support"
+ depends on (SWCONFIG && LEDS_TRIGGERS)
+
+config ADM6996_PHY
+ tristate "Driver for ADM6996 switches"
+ select SWCONFIG
+ ---help---
+ Currently supports the ADM6996FC and ADM6996M switches.
+ Support for FC is very limited.
+
+config AR8216_PHY
+ tristate "Driver for Atheros AR8216 switches"
+ select ETHERNET_PACKET_MANGLE
+ select SWCONFIG
+
+config AR8216_PHY_LEDS
+ bool "Atheros AR8216 switch LED support"
+ depends on (AR8216_PHY && LEDS_CLASS)
+
+source "drivers/net/phy/b53/Kconfig"
+
+config IP17XX_PHY
+ tristate "Driver for IC+ IP17xx switches"
+ select SWCONFIG
+
+config MVSWITCH_PHY
+ tristate "Driver for Marvell 88E6060 switches"
+ select ETHERNET_PACKET_MANGLE
+
+config MVSW61XX_PHY
+ tristate "Driver for Marvell 88E6171/6172 switches"
+ select SWCONFIG
+
+config PSB6970_PHY
+ tristate "Lantiq XWAY Tantos (PSB6970) Ethernet switch"
+ select SWCONFIG
+ select ETHERNET_PACKET_MANGLE
+
+config RTL8306_PHY
+ tristate "Driver for Realtek RTL8306S switches"
+ select SWCONFIG
+
+config RTL8366_SMI
+ tristate "Driver for the RTL8366 SMI interface"
+ depends on GPIOLIB
+ ---help---
+ This module implements the SMI interface protocol which is used
+ by some RTL8366 ethernet switch devices via the generic GPIO API.
+
+if RTL8366_SMI
+
+config RTL8366_SMI_DEBUG_FS
+ bool "RTL8366 SMI interface debugfs support"
+ depends on DEBUG_FS
+ default n
+
+config RTL8366S_PHY
+ tristate "Driver for the Realtek RTL8366S switch"
+ select SWCONFIG
+
+config RTL8366RB_PHY
+ tristate "Driver for the Realtek RTL8366RB switch"
+ select SWCONFIG
+
+config RTL8367_PHY
+ tristate "Driver for the Realtek RTL8367R/M switches"
+ select SWCONFIG
+
+config RTL8367B_PHY
+ tristate "Driver fot the Realtek RTL8367R-VB switch"
+ select SWCONFIG
+
+endif # RTL8366_SMI
+
comment "MII PHY device drivers"
config SFP
--- a/drivers/net/phy/Makefile
+++ b/drivers/net/phy/Makefile
@@ -22,6 +22,21 @@ libphy-$(CONFIG_LED_TRIGGER_PHY) += phy_
obj-$(CONFIG_PHYLINK) += phylink.o
obj-$(CONFIG_PHYLIB) += libphy.o
+obj-$(CONFIG_SWCONFIG) += swconfig.o
+obj-$(CONFIG_ADM6996_PHY) += adm6996.o
+obj-$(CONFIG_AR8216_PHY) += ar8216.o ar8327.o
+obj-$(CONFIG_SWCONFIG_B53) += b53/
+obj-$(CONFIG_IP17XX_PHY) += ip17xx.o
+obj-$(CONFIG_MVSWITCH_PHY) += mvswitch.o
+obj-$(CONFIG_MVSW61XX_PHY) += mvsw61xx.o
+obj-$(CONFIG_PSB6970_PHY) += psb6970.o
+obj-$(CONFIG_RTL8306_PHY) += rtl8306.o
+obj-$(CONFIG_RTL8366_SMI) += rtl8366_smi.o
+obj-$(CONFIG_RTL8366S_PHY) += rtl8366s.o
+obj-$(CONFIG_RTL8366RB_PHY) += rtl8366rb.o
+obj-$(CONFIG_RTL8367_PHY) += rtl8367.o
+obj-$(CONFIG_RTL8367B_PHY) += rtl8367b.o
+
obj-$(CONFIG_MDIO_BCM_IPROC) += mdio-bcm-iproc.o
obj-$(CONFIG_MDIO_BCM_UNIMAC) += mdio-bcm-unimac.o
obj-$(CONFIG_MDIO_BITBANG) += mdio-bitbang.o
--- a/include/linux/platform_data/b53.h
+++ b/include/linux/platform_data/b53.h
@@ -25,6 +25,9 @@ struct b53_platform_data {
u32 chip_id;
u16 enabled_ports;
+ /* allow to specify an ethX alias */
+ const char *alias;
+
/* only used by MMAP'd driver */
unsigned big_endian:1;
void __iomem *regs;