You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
freifunkist-firmware/target/linux/ath79/dts/ar9344_zbtlink_zbt-wd323.dts

166 lines
2.6 KiB

// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "ar9344.dtsi"
/ {
model = "ZBT WD323";
compatible = "zbtlink,zbt-wd323", "qca,ar9344";
keys {
compatible = "gpio-keys";
reset {
label = "reset";
gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
};
i2c {
compatible = "i2c-gpio";
#address-cells = <1>;
#size-cells = <0>;
pinctrl-names = "default";
pinctrl-0 = <&enable_gpio15 &enable_gpio19>;
sda-gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
scl-gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
/* can be removed on 4.19 */
gpios = <&gpio 19 GPIO_ACTIVE_LOW>,
<&gpio 15 GPIO_ACTIVE_LOW>;
pcf8563: pcf8563@51 {
compatible = "nxp,pcf8563";
reg = <0x51>;
#clock-cells = <0>;
};
};
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
pinctrl-0 = <&enable_gpio20_gpio22>;
wifi {
label = "zbt-wd323:green:wifi";
gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
lan1 {
label = "zbt-wd323:orange:lan1";
gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
};
lan2 {
label = "zbt-wd323:orange:lan2";
gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
};
};
};
&wdt {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&enable_gpio21>;
};
&uart {
status = "okay";
};
&gpio {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&jtag_disable_pins>;
};
&usb {
status = "okay";
};
&usb_phy {
status = "okay";
};
&eth0 {
status = "okay";
phy-handle = <&swphy4>;
mtd-mac-address = <&art 0x0>;
};
&eth1 {
status = "okay";
mtd-mac-address = <&art 0x6>;
};
&spi {
num-chipselects = <1>;
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
spi-max-frequency = <22000000>;
reg = <0>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
uboot@0 {
reg = <0x0 0x40000>;
read-only;
};
uboot-env@40000 {
reg = <0x40000 0x10000>;
read-only;
};
firmware@50000 {
compatible = "denx,uimage";
reg = <0x50000 0xfa0000>;
};
art: art@ff0000 {
reg = <0xff0000 0x10000>;
read-only;
};
};
};
};
&wmac {
status = "okay";
mtd-cal-data = <&art 0x1000>;
mtd-mac-address = <&art 0x1002>;
};
&pinmux {
enable_gpio15: pinmux_enable_gpio15 {
pinctrl-single,bits = <0xc 0x0 0xff000000>;
};
enable_gpio19: pinmux_enable_gpio19 {
pinctrl-single,bits = <0x10 0x0 0xff000000>;
};
enable_gpio20_gpio22: pinmux_enable_gpio20_gpio22 {
pinctrl-single,bits = <0x14 0x0 0xff00ff>;
};
enable_gpio21: pinmux_enable_gpio21 {
pinctrl-single,bits = <0x14 0x0 0xff00>;
};
};