You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
freifunkist-firmware/target/linux/ath79/dts/ar9344_winchannel_wb2000.dts

220 lines
3.4 KiB

// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "ar9344.dtsi"
/ {
model = "Winchannel WB2000";
compatible = "winchannel,wb2000", "qca,ar9344";
chosen {
bootargs = "console=ttyS0,115200n8";
};
aliases {
led-boot = &led_system;
led-failsafe = &led_system;
led-running = &led_system;
led-upgrade = &led_system;
};
i2c {
compatible = "i2c-gpio";
gpios = <&gpio 17 GPIO_ACTIVE_HIGH
&gpio 16 GPIO_ACTIVE_HIGH
>;
#address-cells = <1>;
#size-cells = <0>;
rtc@68 {
compatible = "dallas,ds1339";
reg = <0x68>;
};
};
leds {
compatible = "gpio-leds";
wlan2g {
label = "wb2000:green:2g";
gpios = <&gpio 20 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "phy0tpt";
};
usb {
label = "wb2000:green:usb";
gpios = <&gpio 21 GPIO_ACTIVE_HIGH>;
trigger-sources = <&hub_port1>, <&hub_port2>;
linux,default-trigger = "usbport";
};
led_system: system {
label = "wb2000:green:system";
gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
default-state = "on";
};
};
keys {
compatible = "gpio-keys-polled";
poll-interval = <50>;
reset {
linux,code = <KEY_RESTART>;
gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
};
ath9k-leds {
compatible = "gpio-leds";
wlan {
label = "wb2000:green:5g";
gpios = <&ath9k 6 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy1tpt";
};
};
};
&ref {
clock-frequency = <40000000>;
};
&uart {
status = "okay";
};
&spi {
num-cs = <1>;
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <25000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x0 0x40000>;
read-only;
};
partition@40000 {
label = "u-boot-env";
reg = <0x40000 0x10000>;
read-only;
};
partition@50000 {
label = "firmware";
reg = <0x50000 0xf80000>;
compatible = "denx,uimage";
};
partition@fd0000 {
label = "nvram";
reg = <0xfd0000 0x10000>;
read-only;
};
art: partition@fe0000 {
label = "art";
reg = <0xfe0000 0x10000>;
read-only;
};
addr: partition@ff0000 {
label = "addr";
reg = <0xff0000 0x10000>;
read-only;
};
};
};
};
&pcie {
status = "okay";
ath9k: wifi@0,0 {
compatible = "pci168c,0030";
reg = <0x0000 0 0 0 0>;
qca,no-eeprom;
mtd-mac-address = <&addr 0x0>;
mtd-mac-address-increment = <0x10>;
#gpio-cells = <2>;
gpio-controller;
};
};
&usb {
#address-cells = <1>;
#size-cells = <0>;
status = "okay";
port@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
#trigger-source-cells = <0>;
hub_port1: port@1 {
reg = <1>;
#trigger-source-cells = <0>;
};
hub_port2: port@2 {
reg = <2>;
#trigger-source-cells = <0>;
};
};
};
&usb_phy {
status = "okay";
};
&wmac {
status = "okay";
mtd-cal-data = <&art 0x1000>;
mtd-mac-address = <&addr 0x0>;
};
&mdio0 {
status = "okay";
phy-mask = <0x10>;
phy4: ethernet-phy@4 {
reg = <4>;
};
};
&eth0 {
status = "okay";
pll-data = <0xe000000 0x04000101 0x04001313>;
mtd-mac-address = <&addr 0x0>;
mtd-mac-address-increment = <0x21>;
phy-mode = "rgmii-rxid";
phy-handle = <&phy4>;
gmac-config {
device = <&gmac>;
rgmii-gmac0 = <1>;
rxd-delay = <1>;
rxdv-delay = <1>;
};
};