You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
105 lines
3.0 KiB
105 lines
3.0 KiB
/*
|
|
* drivers/usb/host/ehci-oxnas.c
|
|
*
|
|
* Tzachi Perelstein <tzachi@marvell.com>
|
|
*
|
|
* This file is licensed under the terms of the GNU General Public
|
|
* License version 2. This program is licensed "as is" without any
|
|
* warranty of any kind, whether express or implied.
|
|
*/
|
|
#include <common.h>
|
|
#include <asm/arch/hardware.h>
|
|
#include <asm/arch/sysctl.h>
|
|
#include <asm/arch/clock.h>
|
|
|
|
#include "ehci.h"
|
|
|
|
static struct ehci_hcor *ghcor;
|
|
|
|
static int start_oxnas_usb_ehci(void)
|
|
{
|
|
#ifdef CONFIG_USB_PLLB_CLK
|
|
reset_block(SYS_CTRL_RST_PLLB, 0);
|
|
enable_clock(SYS_CTRL_CLK_REF600);
|
|
|
|
writel((1 << PLLB_ENSAT) | (1 << PLLB_OUTDIV) | (2 << PLLB_REFDIV),
|
|
SEC_CTRL_PLLB_CTRL0);
|
|
/* 600MHz pllb divider for 12MHz */
|
|
writel(PLLB_DIV_INT(50) | PLLB_DIV_FRAC(0), SEC_CTRL_PLLB_DIV_CTRL);
|
|
#else
|
|
/* ref 300 divider for 12MHz */
|
|
writel(REF300_DIV_INT(25) | REF300_DIV_FRAC(0), SYS_CTRL_REF300_DIV);
|
|
#endif
|
|
|
|
/* Ensure the USB block is properly reset */
|
|
reset_block(SYS_CTRL_RST_USBHS, 1);
|
|
reset_block(SYS_CTRL_RST_USBHS, 0);
|
|
|
|
reset_block(SYS_CTRL_RST_USBHSPHYA, 1);
|
|
reset_block(SYS_CTRL_RST_USBHSPHYA, 0);
|
|
|
|
reset_block(SYS_CTRL_RST_USBHSPHYB, 1);
|
|
reset_block(SYS_CTRL_RST_USBHSPHYB, 0);
|
|
|
|
/* Force the high speed clock to be generated all the time, via serial
|
|
programming of the USB HS PHY */
|
|
writel((2UL << USBHSPHY_TEST_ADD) |
|
|
(0xe0UL << USBHSPHY_TEST_DIN), SYS_CTRL_USBHSPHY_CTRL);
|
|
|
|
writel((1UL << USBHSPHY_TEST_CLK) |
|
|
(2UL << USBHSPHY_TEST_ADD) |
|
|
(0xe0UL << USBHSPHY_TEST_DIN), SYS_CTRL_USBHSPHY_CTRL);
|
|
|
|
writel((0xfUL << USBHSPHY_TEST_ADD) |
|
|
(0xaaUL << USBHSPHY_TEST_DIN), SYS_CTRL_USBHSPHY_CTRL);
|
|
|
|
writel((1UL << USBHSPHY_TEST_CLK) |
|
|
(0xfUL << USBHSPHY_TEST_ADD) |
|
|
(0xaaUL << USBHSPHY_TEST_DIN), SYS_CTRL_USBHSPHY_CTRL);
|
|
|
|
#ifdef CONFIG_USB_PLLB_CLK /* use pllb clock */
|
|
writel(USB_CLK_INTERNAL | USB_INT_CLK_PLLB, SYS_CTRL_USB_CTRL);
|
|
#else /* use ref300 derived clock */
|
|
writel(USB_CLK_INTERNAL | USB_INT_CLK_REF300, SYS_CTRL_USB_CTRL);
|
|
#endif
|
|
/* Enable the clock to the USB block */
|
|
enable_clock(SYS_CTRL_CLK_USBHS);
|
|
|
|
return 0;
|
|
}
|
|
int ehci_hcd_init(int index, enum usb_init_type init, struct ehci_hccr **hccr,
|
|
struct ehci_hcor **hcor)
|
|
{
|
|
start_oxnas_usb_ehci();
|
|
*hccr = (struct ehci_hccr *)(USB_HOST_BASE + 0x100);
|
|
*hcor = (struct ehci_hcor *)((uint32_t)*hccr +
|
|
HC_LENGTH(ehci_readl(&(*hccr)->cr_capbase)));
|
|
ghcor = *hcor;
|
|
return 0;
|
|
}
|
|
|
|
int ehci_hcd_stop(int index)
|
|
{
|
|
reset_block(SYS_CTRL_RST_USBHS, 1);
|
|
disable_clock(SYS_CTRL_CLK_USBHS);
|
|
return 0;
|
|
}
|
|
|
|
extern void __ehci_set_usbmode(int index);
|
|
void ehci_set_usbmode(int index)
|
|
{
|
|
#define or_txttfill_tuning _reserved_1_[0]
|
|
u32 tmp;
|
|
|
|
__ehci_set_usbmode(index);
|
|
|
|
tmp = ehci_readl(&ghcor->or_txfilltuning);
|
|
tmp &= ~0x00ff0000;
|
|
tmp |= 0x003f0000; /* set burst pre load count to 0x40 (63 * 4 bytes) */
|
|
tmp |= 0x16; /* set sheduler overhead to 22 * 1.267us (HS) or 22 * 6.33us (FS/LS)*/
|
|
ehci_writel(&ghcor->or_txfilltuning, tmp);
|
|
|
|
tmp = ehci_readl(&ghcor->or_txttfill_tuning);
|
|
tmp |= 0x2; /* set sheduler overhead to 2 * 6.333us */
|
|
ehci_writel(&ghcor->or_txttfill_tuning, tmp);
|
|
}
|
|
|