You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

Rafał Miłecki 06405df7a8 brcm47xx: bump kernel to 4.4 ... Kernel 4.4 was ready for brcm47xx for almost a year now but I kept postponing the bump due to problems with Linksys WRT300N v1.0. OpenWrt and LEDE with 4.4 were hanging at the booting with the: > Starting program at 0x80001000 (the last CFE message). This was a permanent state, "make distclean" wasn't helping, I spent hours debugging this and I was reliably reproducing the issue every time. I also reported it on linux-mips ML in the thread: > BCM4704 stopped booting with 4.4 (due to vmlinux size?) After ~month I started working on WRT300N again. I got hangs as expected every time I switched from 4.1 to 4.4. I started experimenting with: 1) TRX content (I tried dropping rootfs partition) 2) BZ_TEXT_START of lzma-loader 3) Flashing other variants of image: lzma compressed kernel (without a loader), gzip compressed one, uncompressed one. At some point I got rootfs-less image booting and after that I couldn't reproduce problem anymore, even with a complete firmware. It seems like hardware was in some locked/unstable state that got magically fixed. I have LEDE working now, tested it even with "make distclean", it seems we can bump kernel now. I'll keep testing it on WRT300N for some time. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>		8 years ago
..
adm5120	kernel: drop usbdev LED trigger	8 years ago
adm8668	…
apm821xx	switch to the new usbport LED trigger	8 years ago
ar7	…
ar71xx	switch to the new usbport LED trigger	8 years ago
arc770	tools: remove old mkdosfs symlink from dosfstools	8 years ago
archs38	tools: remove old mkdosfs symlink from dosfstools	8 years ago
arm64	…
at91	at91: Remove u-boot from platform images folder	8 years ago
ath25	…
au1000	…
bcm53xx	bcm53xx: include b43 in Tenda AC9 image	8 years ago
brcm47xx	brcm47xx: bump kernel to 4.4	8 years ago
brcm63xx	switch to the new usbport LED trigger	8 years ago
brcm2708	kernel: drop usbdev LED trigger	8 years ago
cns3xxx	…
gemini	…
generic	kernel: update kernel 4.4 to version 4.4.27	8 years ago
imx6	imx6: inittab: Use login.sh wrapper so we can configure console password	8 years ago
ipq806x	switch to the new usbport LED trigger	8 years ago
ixp4xx	…
kirkwood	…
lantiq	lantiq: enable cpu temp driver for all vr9 boards	8 years ago
malta	…
mcs814x	switch to the new usbport LED trigger	8 years ago
mediatek	switch to the new usbport LED trigger	8 years ago
mpc85xx	…
mvebu	mvebu: add support for the Linksys WRT3200ACM (Rango)	8 years ago
mxs	tools: remove old mkdosfs symlink from dosfstools	8 years ago
octeon	…
omap	…
omap24xx	…
orion	…
oxnas	switch to the new usbport LED trigger	8 years ago
ppc40x	…
ppc44x	…
ramips	switch to the new usbport LED trigger	8 years ago
rb532	…
realview	…
sunxi	tools: remove old mkdosfs symlink from dosfstools	8 years ago
uml	…
x86	x86: 64: enable pci hotplug and acpipnp	8 years ago
xburst	…
zynq	zynq: fix maintainer email address	8 years ago
Makefile	…