6111 Commits (f3f3be3dfe61d4f48f0749c1f98616c0e52bcda4)

Author SHA1 Message Date
Daniel Dickinson 7224337d71 Profiles: GW6X00: Replace ext2 module with ext4 as ext2 and 3 are going away. Remove kmod-loop as the need for it has been superseded by block-extroot, and remove kmod-fs-vfat as it takes space and is rarely needed. 14 years ago
Daniel Dickinson 2a86dcc3d6 Profiles: Make buttons and led modules included by default so that failsafe will work in the case of builds for releases. 14 years ago
Daniel Dickinson c6ef9a0720 Profiles: Move wpad-mini to the profiles that use it, rather than default for all profiles (because -wpad-mini means it's not selectable, which isn't what we always want for the No WiFi profile 14 years ago
Daniel Dickinson 4ab2416621 flash_chips: Added Macronix MX29LV640T Flash Chip support previously mistakenly added to brcm63xx. Thanks blunoise. 14 years ago
Daniel Dickinson f8ed133c0a patches: Renamed 150-led_count to 141-led_count so it comes before the 15-alice_gate2_leds.patch as which led count was mistakenly given the same number. 14 years ago
Daniel Dickinson 0e839ea40d Revert "[brcm63xx] patches-2.6.35: Added flash chip definition for Macronix MX29LV640T." 14 years ago
Daniel Dickinson 183d628485 patches-2.6.35: Added flash chip definition for Macronix MX29LV640T. Thanks blunoise 14 years ago
Daniel Dickinson 8f9b14dafe boards: Added GW6x00 fixups and GPIOs. The GW6200 GPIOs are different than the reference design 96348GW so we use fixup to allow us to define the correct ones, also the GW6000 has no GPIO-controlled leds. 14 years ago
Daniel Dickinson 3baa168e09 patches: Refreshed patches after led_count 14 years ago
Daniel Dickinson b963cbde33 board definitions: Added patch for calculating led count, which was part of the patch removed in the previous commit 14 years ago
Daniel Dickinson e5ca4d81f4 Remove patch 140-new_bcm96348gw_leds because it is really the GW6200 leds, not the generic 96348GW. Another commit will add the GW6200 specific boardid and leds. This removal reverts the 96348GW leds to the reference design GPIOs. 14 years ago
Hauke Mehrtens 0fc35b30e3 kernel: fix cryptodev with kernel >= 2.6.35 14 years ago
Daniel Dickinson ad24e14b35 base-files: Added the preinit information for reset button and preinit indication led, and preinit interface 14 years ago
Daniel Dickinson 244db5ac6a board definition: Fixed CPVA642 LED definitions 14 years ago
Daniel Dickinson 8316194016 board definitions: Added CPVA642 GPIO leds and buttons and refreshed patches later in series due to fuzz 14 years ago
Daniel Dickinson 7129521696 base-files: Added network defconfig because board only has one ethernet (4-port switch) 14 years ago
Gabor Juhos 0449d92dd7 ramips: add support for 2.6.36 14 years ago
Gabor Juhos 01a5cb48c8 ramips: default profile fix 14 years ago
Gabor Juhos 47dd3b9fea ramips: use tabs instead of spaces in mach-f5d8235-v2.c 14 years ago
Hauke Mehrtens 2f7964de3e brcm47xx: do not read from CFE 14 years ago
Hauke Mehrtens 852f7b37ed brcm47xx: backport patch from kernel 2.6.37 14 years ago
Hauke Mehrtens 7b1ae48645 brcm47xx: use on common files dir 14 years ago
Imre Kaloz 044ea01f9c preliminary support for Freescale MPC85xx based boards 14 years ago
Felix Fietkau 8067f3f3cc ar71xx: work around a PCI controller bug which causes reads to the PCI_COMMAND register to return bogus values - properly fixes ath9k module reload issues 14 years ago
Imre Kaloz 187359dc67 remove unused kernel versions, make 2.6.36 the default 14 years ago
Hauke Mehrtens 41b3383499 brcm47xx: Add edimax PS1208mfg support 14 years ago
Jo-Philipp Wich 6f7e2d4ce8 tune rtl8366s default config, make vlan 1 cpu port tagged and use eth0.1 for the lan interface - this brings the configuration more in line with other switch setups 14 years ago
Gabor Juhos 79c24b2cb0 ar71xx: refresh patches 14 years ago
Gabor Juhos 17564e7db8 generic: yet another missing config symbol for 2.6.37 14 years ago
Jo-Philipp Wich 30b950154b add a new image for the TEW-652BRP which can be used with the bootloader recovery option 14 years ago
Jo-Philipp Wich 2fe5c1d124 backport two changes from kernel.org: 65e9b62d4503849b10bedfc29bff0473760cc597 ipv6: add special mode accept_ra=2 to accept RA while configured as router 14 years ago
Daniel Dickinson 9677b65cb6 image Makefile: Corrected router imagename length limiting. Thanks KanjiMonster for reminding me. 14 years ago
Daniel Dickinson 314bce63e6 bcm63xx: Add support for the T-Com Speedport W 500V. 14 years ago
Daniel Dickinson 3a49f669f2 bcm63xx: Add board id override fixup. 14 years ago
Daniel Dickinson c51d772e62 bcm63xx: Finalize support for DSL-274xB, rev C2. 14 years ago
Daniel Dickinson 8fa9b24a4c bcm63xx: Allow 'colored' power leds. 14 years ago
Daniel Dickinson fec30c8c80 bcm63xx: Don't hardcode the switch ethernet interface in preinit. 14 years ago
Daniel Dickinson b1b318750a bcm63xx: Add defconfigs. 14 years ago
Florian Fainelli a133b09b07 refresh patches and remove trailing whitespaces 14 years ago
Florian Fainelli 27189b328e refresh and refine 972-cpmac_multi_probe.patch, patch from sn9 14 years ago
Florian Fainelli 629cc5b101 refresh 973-cpmac_handle_mvswitch.patch 14 years ago
Florian Fainelli a2aa5a227e refresh and refine vlynq patch, patch from sn9 14 years ago
Hauke Mehrtens af2349b4bc brcm47xx: remove support for old kernel versions 14 years ago
Hauke Mehrtens 6f58cc20fc brcm47xx: use kernel 2.6.36.1 as new default kernel for this target. 14 years ago
Hauke Mehrtens 34d53c2be1 kernel: add missing config symbols for 2.6.37-rc3 14 years ago
Hauke Mehrtens fb27da9487 brcm47xx: reorder patches like they were commitet upstream 14 years ago
Felix Fietkau b54002aa8e remove CONFIG_ADM6996_PHY=y for ar7 and atheros - this driver is incomplete and should not be used yet 14 years ago
Hauke Mehrtens 256f94dea4 kernel: add missing config option 14 years ago
Florian Fainelli e8881e29b6 patch 972-cpmac_multi_probe.patch correctly, thanks sn9 14 years ago
Florian Fainelli 4b3ffba803 rename 973-cpmac_handle_mvswitch.c to 973-cpmac_handle_mvswitch.patch 14 years ago