Steven Barth
c118e5edf4
network: Unbind DHCPv6 from underlying interfaces
...
This allows IPv6 to set up without IPv4 being up thus
IPv6-only or IPv6+DS-Lite working with the default config.
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 42848
10 years ago
Gabor Juhos
f79b613934
x86/net5501: remove broken flag
...
According to Christophe, the kernel boots on the Soekris net5501
board.
Reported-by: Christophe Prevotaux <cprevotaux@nltinc.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 40468
11 years ago
Felix Fietkau
f7e747baa9
x86: set default kernel version to 3.10
...
Place the previous selection (3.3.8) into the only subtarget that did
not override it to 3.10
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40454
11 years ago
Gabor Juhos
627baa28d3
kernel: update 3.10 to 3.10.34
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 40291
11 years ago
Gabor Juhos
c384015892
x86/net5501: remove old kernel config
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39729
11 years ago
Gabor Juhos
3488372fa7
x86/net5501: switch to 3.10 and add broken flag
...
Compile tested only.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39728
11 years ago
Gabor Juhos
8dc438ea7f
x86/net5501: add config for 3.10
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39727
11 years ago
Felix Fietkau
ef68210f93
build: unify x86 target cflags
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38212
11 years ago
Jonas Gorski
1beaf031d1
target: don't build jffs2 nor images by default
...
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 36863
12 years ago
Steven Barth
4e8f7f37ed
Change default IPv6 config to enable DHCPv6-PD
...
SVN-Revision: 36384
12 years ago
Steven Barth
ea94d66b0f
Adapt default network configuration for IPv6
...
SVN-Revision: 36278
12 years ago
Felix Fietkau
741f6ba7ef
x86: fix typo in alix2/net5501 default packages
...
SVN-Revision: 34972
12 years ago
Gabor Juhos
07b5a3eea2
x86: remove support for old kernels
...
SVN-Revision: 31804
13 years ago
Gabor Juhos
604e3aac0a
x86: remove subtarget specific LINUX_VERSION overrides
...
SVN-Revision: 31803
13 years ago
Gabor Juhos
fb7da5bbde
x86/net5501: switch to 3.3
...
Compile tested only.
SVN-Revision: 31752
13 years ago
Gabor Juhos
19f691f8e4
x86: sync 3.2 configs
...
SVN-Revision: 31750
13 years ago
Gabor Juhos
39994008cb
linux: move certain disabled symbols to the generic configs
...
* CONFIG_ARCH_DMA_ADDR_T_64BIT
* CONFIG_ARCH_HAS_ILOG2_U32
* CONFIG_ARCH_HAS_ILOG2_U64
* CONFIG_ARCH_PHYS_ADDR_T_64BIT
* CONFIG_ARCH_SUPPORTS_MSI
* CONFIG_GENERIC_CPU_DEVICES
* CONFIG_HWMON_DEBUG_CHIP
* CONFIG_I2C_PXA_PCI
* CONFIG_LEDS_GPIO
* CONFIG_MINIX_FS_NATIVE_ENDIAN
* CONFIG_MLX4_CORE
* CONFIG_POWER_SUPPLY
* CONFIG_POWER_SUPPLY_DEBUG
* CONFIG_QUOTACTL
* CONFIG_SDIO_UART
* CONFIG_SENSORS_K10TEMP
* CONFIG_SENSORS_SCH56XX_COMMON
* CONFIG_SENSORS_VIA_CPUTEMP
* CONFIG_SERIO_AMBAKMI
* CONFIG_SERIO_I8042
* CONFIG_SERIO_LIBPS2
* CONFIG_SERIO_PCIPS2
* CONFIG_SERIO_RAW
* CONFIG_SERIO_SERPORT
* CONFIG_SPI_BITBANG
* CONFIG_SPI_GPIO
SVN-Revision: 31737
13 years ago
Jonas Gorski
22b4e6b882
kernel: update linux 3.2 to 3.2.16
...
SVN-Revision: 31459
13 years ago
Jonas Gorski
d0bfc67e2e
kernel: x86: also update subtarget kernel versions
...
SVN-Revision: 31338
13 years ago
Jo-Philipp Wich
74db55a982
config: deprecated symbol CONFIG_LEDS_GPIO_PLATFORM
...
CONFIG_LEDS_GPIO_PLATFORM went away a while ago.
http://git.kernel.org/?p=linux/kernel/git/stable/linux-stable.git;a=commit;h=2bcc7ed5b83b0a59c6976476e8788675038fb11b
Also, most platforms comment out CONFIG_LEDS_GPIO but not x86 for some reason.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
SVN-Revision: 30708
13 years ago
Jo-Philipp Wich
25d605ab0e
net5501: backport drivers from linux-next Backport net5501 platform driver from 3.4. Remove vestiges of old (pre-2.6.30) leds-net5501.c driver. Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
...
SVN-Revision: 30021
13 years ago
Jo-Philipp Wich
d13c3cd073
net5501: adjust CFLAGS and package selection ( #10893 ) This patches the CFLAGS for Geode LX CPUs for 4.3 and new GGC versions. This creates more compatible code and allowed me to boot my system first time with no troubles. Also, the missing kmod is added in.
...
SVN-Revision: 30013
13 years ago
Jo-Philipp Wich
7a9e4ffe8e
alix2, geos, net5501: remove kmod-ledtrig-netfilter, its not used by any standard system facility
...
SVN-Revision: 30000
13 years ago
Jo-Philipp Wich
bf8bb9b661
alix2, goes, net5501: clean up default packages Remove packages which are dependencies of other packages Remove packages which are part of the default package list Remove DSL specific packages from net5501 Remove bridge package, we use the busybox applet Replace hostapd with wpad
...
SVN-Revision: 29999
13 years ago
Jo-Philipp Wich
047ba1e12e
alix2, net5501: bump both subtargets to Linux 3.2.2 to align with the rest
...
SVN-Revision: 29998
13 years ago
Jo-Philipp Wich
5523eca4e5
net5501: correct net5501 h/w configuration Bump to version 3.2. Simplify and correct kernel config (based on x86/config-3.2). Designate eth0 as wan interface, and bridge eth1/eth2/eth3. Add heartbeat LED trigger. Use correct CS5535 GPIO driver. Use correct USB drivers (OHCI not UHCI). Add MSR and HW clock support. Add GPIO mask definition. Add correct SATA drivers. Add LED triggers. [Patch from Philipp Prindeville, via http://patchwork.openwrt.org/patch/1802/ ]
...
SVN-Revision: 29994
13 years ago
Felix Fietkau
1a9b885c74
x86: turn off CONFIG_X86_GENERIC for geos and net5501
...
CONFIG_X86_GENERIC obscures CONFIG_MGEODE_LX, etc. and causes it to use wrong cache-line size.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
SVN-Revision: 24071
14 years ago
Felix Fietkau
ba5296268c
x86: refresh config, enable pci express support
...
SVN-Revision: 24026
14 years ago
Florian Fainelli
60c6d33e00
net5501: Add features to net5501 and remove HID support (unneeded)
...
Since the net5501 doesn't have a VGA port, it doesn't need HID support either --
all console access will be over a serial port.
Also add FEATURES to it as well.
Signed-of-by: Philip Prindeville <philip@redfish-solutions.com>
SVN-Revision: 23916
14 years ago
Florian Fainelli
b013e4eec4
add kmod-leds-net5501
...
Signed-off-by: Philip Prindeville <philipp_subx@redfish-solutions.com>
SVN-Revision: 23729
14 years ago
Florian Fainelli
eace922392
resync config-default, enable gpio support
...
SVN-Revision: 23727
14 years ago
Florian Fainelli
a6873b3095
Use -pipe for net5501 and geos CFLAGS, same as all of the other platforms
...
Makes the builds run slightly faster on multicores.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
SVN-Revision: 23495
14 years ago
Felix Fietkau
19723d09c2
x86: turn on optimizations for net5501 (patch by Philip A. Prindeville)
...
SVN-Revision: 23104
14 years ago
Nicolas Thill
37b02afe6a
package/kernel: use common gpio- & wdt- prefixes for GPIO and watchdog module names
...
SVN-Revision: 21137
15 years ago
Florian Fainelli
15e8d2e0b7
add net5501 support
...
This patch brings up the net5501 platform.
Note that the x86/ target included support for all x86/ class
processors. That's not technically correct. This should be constrained
only to the "generic" subtarget. Every x86-class target that isn't
generic should be able to select only the optimizations/capabilities
applicable to that architectural variant.
It's also assumed that all x86 processors have keyboard & mouse ports,
ISA, DMI, ACPI... the embedded ones typically don't. Again, moving
that to the generic subtarget.
Fortunately, this was a fairly benign tweak.
The net5501 board includes the following logic:
Geode/LX processor
CS5535 super-I/O chip
PC87360 sensor chip
Via Rhine Ethernet controllers
Via Sata controllers
USB, LEDS, I2C
Signed-off-by: Philip Prindeville <philipp_subx@redfish-solutions.com>
SVN-Revision: 20794
15 years ago