2d994f2fdc
cobalt: enable bridge
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 45014
10 years ago
c67144cc05
kernel: extend seccomp with a LOG action
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 45007
10 years ago
414e8ba634
bcm53xx: use the correct kernel image
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45003
10 years ago
af69bf56b6
drop 3.19 support
...
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 45002
10 years ago
34b51b6f6f
ar71xx/image: move wdr3500/wdr3600/wdr4300 to new building code
...
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
SVN-Revision: 45000
10 years ago
8d2d62ca95
ar71xx/image: add tplink device template for new building code
...
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
SVN-Revision: 44999
10 years ago
41785176ec
ar71xx/image: add Build/mktplinkfw as buildstep for new build code
...
Use `mktplinkfw sysupgrade` or `mktplinkfw factory` or
`mktplinkfw image`
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
SVN-Revision: 44998
10 years ago
48c69e3022
bcm53xx: convert to new image building code
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44996
10 years ago
8ffc831bef
brcm63xx: use a lookup for bcmcia's ready gpio
...
Should fix pcmcia on BCM6348 and BCM6358 after switching to DT-probed
gpio controllers.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 44995
10 years ago
1e07f8c7ff
brcm63xx: fix bcm96328avng board name
...
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 44994
10 years ago
4dc169f9a2
brcm63xx: fix bt v2500v dts based detection
...
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 44993
10 years ago
10cdfd04e6
brcm63xx: move RTA770(B)W to dts
...
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 44992
10 years ago
0e4c1ba284
brcm63xx: move MAGIC to dts
...
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 44991
10 years ago
582dfc52f5
brcm63xx: move CPVA502+ to dts
...
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 44990
10 years ago
46b4d4d1d5
brcm63xx: move dg834g v4 to dts
...
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 44989
10 years ago
30a579c674
brcm63xx: move dsl-2640u to dts
...
Also build image again(?).
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 44988
10 years ago
16ea19053a
brcm63xx: move bcm963268bu_p300 to dts
...
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 44987
10 years ago
ad218d3033
brcm63xx: fix compilation on 3.14
...
Fixes the following issue:
drivers/gpio/gpio-bcm63xx.c: In function 'bcm63xx_gpio_probe':
drivers/gpio/gpio-bcm63xx.c:80:4: error: implicit declaration of function 'devm_kasprintf' [-Werror=implicit-function-declaration]
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 44986
10 years ago
2d3371cd0f
brcm63xx: Add BT Home Hub 2A support.
...
Support for the BT HomeHub 2.0 Type A.
This router was manufactured by Thomson, and it's BCM6358 based.
The leds are controled by two chained HC594, all working ok. The BCM5325
switch has the RESET# pin wired to the GPIO15, but currently there is no
way to tell the b53 driver how to get this gpio number in brcm63xx,
therefore swconfig won't use it when performing a switch reset.
The patch was tested with several firmwares, and all except unsupported
stuff (i.e xDSL) works pretty well.
Tested-by: Tahir <tahir00ali@gmail.com>
Signed-off-by: Daniel Gonzalez <dgcbueu@gmail.com>
SVN-Revision: 44985
10 years ago
065d6e9047
brcm63xx: move kernel load address to 8MiB
...
Fixes boot when uncompressed kernel is > 4 MiB (#19251 ).
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 44984
10 years ago
ee0140a678
brcm63xx: hcsimage: respect load address
...
Respect the vmlinux load address when generating images.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 44983
10 years ago
d84fafb9f3
brcm63xx: add Livebox 1 firmware image generation
...
Currently there isn't images ready for flashing liveboxes boards. This
patch adds a script and the code to call it in the bcm63xx images
builder makefile to generate the livebox 1 firmware.
I removed some lines to avoid generating unneded files in the bin/ dir
for this board. And added code to generate a squashed rootfs aligned to
64 kB since the current one in the /bin dir is 128 kB aligned and
doesn't work. Still no sysupgrade support for this board. Upgrading from
within openwrt can be done writing with mtd the kernel, and then the 64k
aligned rootfs.
Regards
Signed-off-by: Daniel Gonzalez <dgcbueu@gmail.com>
[jogo: use sed instead of a separate shell script for the boot script, make it
respect the load address]
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 44982
10 years ago
77e3d442b0
brcm63xx: add a dummy image recipe for boards missing proper images
...
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 44981
10 years ago
02d68c2b57
brcm63xx: drop non-dtb image recipe
...
All images generated contain dtbs, so it is now unused.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 44980
10 years ago
fafa3f57e3
kernel: merge upstream bgmac driver improvements
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44978
10 years ago
68ca1f285c
bcm53xx: enable the full-line-of-zero optimization in the cache controller
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44977
10 years ago
621979b49f
kernel: yaffs: use new_sync_{read,write} for 3.18+
...
Using the do_sync_{read,write} functions in conjunction
with the generic_file_{read,write}_iter causes a kernel
panic like this:
root@OpenWrt:/# mount -t yaffs /dev/mtdblock5 /mnt
[ 2884.110000] yaffs: dev is 32505861 name is "mtdblock5" rw
[ 2884.120000] yaffs: passed flags ""
root@OpenWrt:/# hexdump -vC -n 64 /mnt/kernel
[ 2902.700000] CPU 0 Unable to handle kernel paging request at virtual \
address 00000000, epc == 00000000, ra == 80129414
[ 2902.710000] Oops[#1 ]:
[ 2902.710000] CPU: 0 PID: 1030 Comm: hexdump Not tainted 3.18.9 #2
[ 2902.710000] task: 878e7a20 ti: 868c6000 task.ti: 868c6000
[ 2902.710000] $ 0 : 00000000 fffffff8 00000000 00000000
[ 2902.710000] $ 4 : 868c7e70 868c7ea8 00000001 868c7f08
[ 2902.710000] $ 8 : 00000038 80064f18 80072280 00000000
[ 2902.710000] $12 : 7fa152b8 7709e3a0 00c42008 7709e3a0
[ 2902.710000] $16 : 868c7f08 86a46000 00000010 878e7a20
[ 2902.710000] $20 : 7705c4b0 00000010 00000000 00000000
[ 2902.710000] $24 : 770960bc 7707dd78
[ 2902.710000] $28 : 868c6000 868c7e58 7f8e7030 80129414
[ 2902.710000] Hi : 00000000
[ 2902.710000] Lo : ffffffff
[ 2902.710000] epc : 00000000 (null)
[ 2902.710000] Not tainted
[ 2902.710000] ra : 80129414 do_sync_read+0x7c/0xb4
[ 2902.710000] Status: 1900dc03 KERNEL EXL IE
[ 2902.710000] Cause : 00800008
[ 2902.710000] BadVA : 00000000
[ 2902.710000] PrId : 00019750 (MIPS 74Kc)
Change the yaffs code to use the new_sync_{read,write} functions
instead.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 44974
10 years ago
8fdd0fb07c
kernel: backport rest of bcma patches
...
This backports
bcma: allow disabling (not building) PCI driver
Revert "bcma: Kconfig: Let it depend on PCI"
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 44970
10 years ago
a7724918c9
kernel: mac80211: backport bcma patch renaming IRQ control function
...
This backports upstream commit 702131e2a393b45174be326f1dbe20b658b4f157
bcma: move PCI IRQ control function to host specific code
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 44969
10 years ago
a4d7571367
mark 3.10 targets as broken
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 44968
10 years ago
02e2548b84
x86: use PARTUUID instead explicitly specifying the device by default
...
This changes the x86 image generation to match x86_64, using the PARTUUID for
the rootfs instead of explicitly configuring the device.
It unbreaks KVM with VirtIO, which uses /dev/vda2 instead of /dev/sda2.
Tested in QEMU/KVM with VirtIO, VirtualBox and VMware.
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
SVN-Revision: 44966
10 years ago
d830d34b00
x86_64: fix PARTUUID format with leading zeros
...
Otherwise the root device won't be found in 1/16 of the generated images
(whenever the signature starts with a zero digit).
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
SVN-Revision: 44959
10 years ago
2450985de9
avr32: remove target
...
It depends on obsolete compilers and only works on one device (an
evaluation board).
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44956
10 years ago
3b6c70b7fc
kernel: update bcma with most patches from wireless-drivers-next
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 44955
10 years ago
eb90a6d7d8
kernel: backport fixed_phy_register EXPORT fix from 3.19
...
This fixes
ERROR: "fixed_phy_register" [drivers/net/ethernet/broadcom/bgmac.ko] undefined!
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 44954
10 years ago
2375f37723
generic/3.18: refresh patches
...
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 44951
10 years ago
5be4f2b5b8
mvebu: update mamba dts
...
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 44949
10 years ago
0a84da0841
bcm53xx: add missing cache controller errata options
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44947
10 years ago
a6f914d573
bcm53xx: remove linux 3.14 support
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44946
10 years ago
e890a3bc9a
ramips: make ethernet register map u16 instead of u32
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44940
10 years ago
fb6164a377
bcm53xx: add SMP support
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 44939
10 years ago
577da84c25
uml: bump to 3.18
...
Signed-off-by: Nicolas Thill <nico@openwrt.org>
SVN-Revision: 44937
10 years ago
3c0ea6eced
au1000: drop 005-fix-cpu-clk.patch
...
it has been upstreamed and treackled down with the latest 3.18 update
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 44935
10 years ago
e0155ad7b0
bcm53xx: add support for Asus RT-AC68U
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 44934
10 years ago
79c152b56b
bcm53xx: fix Asus RT-AC87U magic (even if not used yet)
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 44933
10 years ago
d324dd4ff3
bcm53xx: backport BCM5301X Netgear R6250/R8000 DT patches
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 44932
10 years ago
a4523c8e1d
bcm53xx: refresh patches
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 44931
10 years ago
35c52bc261
oxnas: remove pre kernel 3.18 support from pinctrl driver
...
just some pruning...
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 44923
10 years ago
3256194aff
oxnas: add support for kernel 4.0
...
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 44922
10 years ago
908a82ab61
kernel: add two more missing config symbols
...
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 44921
10 years ago
John Crispin