4412334bea
brcm2708: use mmd for overlays subdirectory
...
Fixes https://dev.openwrt.org/ticket/20704
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 47171
9 years ago
0be23c40f3
brcm2708: all sound overlays require i2c to work
...
Tested on RPi B+ with HiFiBerry Amp+
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 47169
9 years ago
7ce3e1fd3c
brcm2708: keep boot partition mounted to allow users to change config.txt
...
This way it's easier to configure device tree overlays, customize other
parameters...
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 47126
9 years ago
d1fc19265a
brcm2708: add support for device tree overlays
...
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 47125
9 years ago
b97498ab29
brcm2708: switch device tree compilation to linux
...
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 47124
9 years ago
a32acfe73c
brcm2708: fix kmod-sound-soc-bcm2708-i2s config
...
Right now, selecting kmod-sound-soc-bcm2708-i2s causes build errors due to
missing configs.
kmod-regmap enables I2C and SPI, causing build errors due to depending
variables not defined.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 47123
9 years ago
0cd478518f
kernel: update 4.1 to 4.1.10
...
Fixes a regression on spi flash devices (upstream commit 1583eaece6fa).
Changelogs:
* https://www.kernel.org/pub/linux/kernel/v4.x/ChangeLog-4.1.7
* https://www.kernel.org/pub/linux/kernel/v4.x/ChangeLog-4.1.8
* https://www.kernel.org/pub/linux/kernel/v4.x/ChangeLog-4.1.9
* https://www.kernel.org/pub/linux/kernel/v4.x/ChangeLog-4.1.10
096-ipv4-off-by-one-in-continuation-handling-in-proc-net.patch was applied
upstream and dropped.
Signed-off-by: Mathias Kresin <openwrt@kresin.me>
[update from 4.1.9 to 4.1.10]
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 47104
9 years ago
e1f0a7e841
brcm2708: remove linux 3.18 support
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 46870
9 years ago
b1be597a7a
brcm2708: add kmod-sound-soc-raspidac3
...
This adds support for RaspiDAC Rev.3x
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 46854
9 years ago
0b5d87fd30
brcm2708: update 4.1 patches
...
As usual, this patches were taken (and rebased) from
https://github.com/raspberrypi/linux/commits/rpi-4.1.y
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 46853
9 years ago
7d6cff4882
kernel: update 3.18 to 3.18.21
...
Changelog:
* https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.21
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 46768
9 years ago
27a40c79b0
brcm2708: override disabled device tree module status from config.txt
...
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 46642
9 years ago
a6e47b8324
brcm2708: fix kmod-sound-soc-iqaudio-dac and add missing symbol
...
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 46641
9 years ago
22b3e521b5
brcm2708: update 4.1 patches
...
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 46640
9 years ago
98e122e4cc
brcm2708: use BuildDTB in image/Makefile
...
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 46639
9 years ago
8e69c9f7ef
image.mk: store the device name variable
...
Make the device name accessible for any build commands instead of
forcing targets to define it themselves.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 46597
9 years ago
caa73eb95c
kernel: update 4.1 to 4.1.4
...
Changelog:
* https://www.kernel.org/pub/linux/kernel/v4.x/ChangeLog-4.1.4
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
[jogo: fix brcm2708 patches, refresh target patches]
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 46560
9 years ago
0afb8e8ac2
brcm2708: add kmod-sound-soc-bcm2708-i2s support
...
This adds support for I2S SoC Audio modules.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 46461
9 years ago
2eab9e03cc
brcm2708: add kmod-video-bcm2835 support
...
This adds BCM2835 camera interface driver as a kernel module.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 46460
9 years ago
cc42b1049b
kernel: refresh patches for 4.1
...
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 46441
9 years ago
84b89e4ec4
brcm2708: add gzip image compression
...
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 46404
9 years ago
08a416e3b9
brcm2708: add Raspberry Pi Compute Module support
...
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 46403
9 years ago
f7ac790356
brcm2708: switch to linux 4.1
...
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 46402
9 years ago
b19a645b40
brcm2708: add upstream (bcm2835) modules and improve downstream ones (bcm2708)
...
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 46401
9 years ago
208ab54e3e
brcm2708: add linux 4.1 support
...
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 46399
9 years ago
03b56c9350
brcm2708: split target config into subtargets
...
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 46398
9 years ago
623da91e4d
brcm2708: remove unneeded base-files
...
Device tree exports board name/model and device LEDs.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 46397
9 years ago
8ef50ec40b
brcm2708: improve profiles and image generation
...
- Add profiles for bcm2708 subtarget.
- Check subtarget for image generation.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 46396
9 years ago
94ef06a8c2
brcm2708: partially revert r46347 to fix sysupgrade
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 46367
9 years ago
2de7910102
brcm2708: Implement sysupgrade
...
Implement sysupgrade for Raspberry Pi, similar to the way it is done on x86:
The config files are saved in the boot partition and moved to where they are
normally expected in preinit.
Also add optional gzip compression for the SD card image, since this can save
a lot of space (76M vs 6M), also similar to x86.
Signed-off-by: Bruno Randolf <br1@einfach.org>
SVN-Revision: 46347
9 years ago
c40f94b0d0
brcm2708: add DT support
...
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 46344
9 years ago
29039f51b3
kernel: refresh patches on linux 3.18
...
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 46308
9 years ago
901a7fa067
kernel: update 3.18 to 3.18.17
...
Changelog:
* https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.17
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 46150
10 years ago
a5a935b49a
brcm2708: fix imagebuilder
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 45824
10 years ago
76d079204d
kernel: update 3.18 to 3.18.14
...
Changelogs:
* https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.12
* https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.13
* https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.14
Build tested on brcm63xx and ipq806x, runtested on brcm63xx.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 45711
10 years ago
7d6eec16b6
brcm2708: remove a patch that was added in the stable update ( fixes #19253 )
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44920
10 years ago
17fdf5fb85
brcm2708: fix mkdosfs command line options order
...
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 44764
10 years ago
fa097e5ae5
kernel: disbale HAMRADIO in generic config
...
HAMRADIO enabled in all generic configs, but no one platform directly
use related drivers/protocols. This symbol is only used for kmod-ax25
package modules. Furthermore, half of platforms explicitly disables
this symbol, what silently disables build of modules for kmod-ax25
package.
So disable HAMRADIO by-default in generic config, add it to kmod-ax25
package and remove it from platform specific configs.
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
SVN-Revision: 44613
10 years ago
a29bd8bdbf
brcm2708: add another missing symbol
...
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 44601
10 years ago
af3b4077bd
brcm2708: add kmod-hwmon-bcm2835 support and more missing symbols
...
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 44449
10 years ago
9270474941
brcm2708: force uart as the default console for procd and remove nonexistent console
...
procd gets last console from cmdline, so swapping tty1 (framebuffer) and ttyAMA0 (uart) is enough to force procd output via uart
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 44448
10 years ago
dc72499b53
brcm2708: add board detection and LED support
...
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 44447
10 years ago
0d36998795
brcm2708: fix spidev
...
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 44434
10 years ago
9b74de00f7
brcm2708: refresh patches
...
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 44433
10 years ago
2dbcf5e91f
brcm2708: add missing config symbols and fix kernel modules for Raspberry Pi 2 by removing local version
...
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 44432
10 years ago
fae2ec33d1
brcm2708: add subtarget copyright and use better board names
...
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 44431
10 years ago
eaec1e41b1
brcm2708: add missing SUBTARGETS:= to makefile
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 44405
10 years ago
b67a6f65d6
brcm2708: remove CMA_DEBUG
...
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 44404
10 years ago
cafc77f74c
brcm2708: add Raspberry Pi 2 support
...
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 44403
10 years ago
146c9aff27
brcm2708: remove 3.14 support
...
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 44402
10 years ago
John Crispin