d120ec18b2
kernel: update 3.10 to 3.10.10
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37890
11 years ago
043edd8074
kernel: update 3.10 to 3.10.9
...
Also refresh 3.10 patches.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37832
11 years ago
af161b6576
brcm47xx: fix typo in Broadcom-bgmac-b43 profile name
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37803
11 years ago
2fcaba306e
brcm47xx: change board detection for some Asus devices
...
This closes #13316
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37680
11 years ago
290dade033
brcm47xx: switch to kernel 3.10.4
...
This uses a new switch driver.
The old ADMTEK Adm6996 switch is not supported any more.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37650
11 years ago
7e14fd55fd
brcm47xx: use lib phy when tg3 is in use
...
This is untested, but probably needed to make it work with the phy lib switch driver.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37649
11 years ago
2b55968f5d
brcm47xx: improve detection of Linksys WRTSL54GS
...
This closes #13319
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37647
11 years ago
6d7f796b52
brcm47xx: remove support for kernel 3.9
...
This is not needed any more.
SVN-Revision: 37646
11 years ago
2363cb3893
brcm47xx: add function to get a gpio pin by name
...
bcm47xx_nvram_gpio_pin() returns a gpio pin number for a given name based
on configuration data in nvram.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37644
11 years ago
e2b2e3886b
brcm47xx: run mtd fixtrx linux every time
...
With this patch it is possible to boot a device with kernel 3.10 a second time.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37625
11 years ago
ef944dcb85
kernel: update 3.10 to 3.10.2
...
Also refresh 3.10 patches.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37502
11 years ago
b1b4e7db13
kernel: move CONFIG_NET_IP_TUNNEL to generic
...
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 37465
12 years ago
c7f8cb3f4f
kernel: update bcma and ssb to version from wireless-testing/master tag master-2013-07-18
...
This should fix some build problems in b43 with kernel 3.3.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37432
12 years ago
866e229299
brcm47xx: fix name of patch
...
SVN-Revision: 37340
12 years ago
f8d55e7541
brcm47xx: use b53 phy driver for the switch in kernel 3.10
...
This makes it possible to use swconfig to controll the switch.
This was tested with devices using b43 and bgmac.
This was not tested on devices using tg3.
This does not support the adm switch used in some very old devices.
SVN-Revision: 37304
12 years ago
a5c0ad6354
brcm47xx: add initial support for kernel 3.10
...
SVN-Revision: 37287
12 years ago
3bc90a4d23
brcm47xx: fix switch handling
...
This fixes some problems with the switch handling
* It now send the messages again to indicate a button for failsafe mode should be pressed
* it does not leak packages between wan and lan any more
* the switch works again in normal mode
The Ethernet connection has to be up when the switch driver switch-robo
is insmoded therefor we just do it again.
Explicitly set enable_vlan to prevent leaking packages.
This should close #13869 , #13868 and #13716
SVN-Revision: 37286
12 years ago
ef0b9be95e
brcm47xx: do not load the kernel modules needed for Ethernet manually
...
add the boot flag to make the kernel modules needed for Ethernet and
diag load on startup.
SVN-Revision: 37284
12 years ago
e800436de3
brcm47xx: do not change nvram without user interaction
...
SVN-Revision: 37281
12 years ago
e041d370a7
brcm47xx: proc gets mounted without this patch
...
SVN-Revision: 37272
12 years ago
8dabd7a26b
brcm47xx: remove obsolete hotplug stuff
...
SVN-Revision: 37271
12 years ago
541bede918
brcm47xx: fix module insert order
...
https://dev.openwrt.org/ticket/13811
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37161
12 years ago
6a4f2922f6
targets: prepare for supporting normal and initramfs images
...
In order to support both normal images and initramfs, ensure that each
target sets KERNELNAME properly so that the generic kernel building code
can copy the corresponding files over $(KDIR) with the appropriate
extension. Update the various paths to the kernel and wrapper images
from $(LINUX_DIR)/arch/$(ARCH)/boot/$(foo) to $(KDIR)/$(foo).
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 37049
12 years ago
39df8d1a45
brcm47xx: dont manually insmod switch drivers
...
Signed-off-by: John Crispin <bloic@openwrt.org>
SVN-Revision: 36993
12 years ago
9492d445de
brcm47xx: run make kernel_oldconfig for 3.9 kernel config
...
SVN-Revision: 36928
12 years ago
87f994d16d
brcm47xx: remove support for kernel 3.6
...
SVN-Revision: 36927
12 years ago
990423f3ef
brcm47xx: add initial support for kernel 3.9
...
SVN-Revision: 36926
12 years ago
46225b99d9
kernel: update linux 3.8 to 3.8.13
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36724
12 years ago
526aedb705
kernel: move CONFIG_MIPS_SEAD3 to generic
...
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 36617
12 years ago
e57c7d6c12
kernel: update linux 3.8 to 3.8.12
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36576
12 years ago
8a9fe26f20
kernel: update linux 3.8 to 3.8.11
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36507
12 years ago
ca7f9638d5
broadcom-diag: support for the WNDR3700v3
...
I recently picked up a WNDR3700 to put OpenWRT on, and only after tearing into the box did I find it
was one of the v3 boards, with poor OpenWRT support. This patch should add the board detection and
LED/button control to the broadcom-diag module, and should generate a netgear .chk image that the
bootloader and stock firmware will accept.
The changes to the broadcom-diag module are more than a few lines because the WNDR3700v3 is driving
its LEDs through an HC164 8-bit shift register.
Signed-off-by: Owen Kirby <osk@exegin.com>
SVN-Revision: 36482
12 years ago
7dee0dae35
brcm47xx: use kernel 3.8.10 as default kernel
...
The biggest change with this kernel is a new partition parser.
SVN-Revision: 36480
12 years ago
00a7ace7cf
brcm47xx: add board detection for NETGEAR WNDR4500 V2
...
SVN-Revision: 36478
12 years ago
1bac172c44
kernel: update bcma and ssb for kernel 3.8+ to version from wireless-testing master-2013-04-26.
...
SVN-Revision: 36473
12 years ago
36d4fd70bc
kernel: update linux 3.8 to 3.8.9
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36453
12 years ago
f58dcb59c6
kernel: backport SSB/BCMA changes in preparation for a compat-wireless update
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36367
12 years ago
4a46687d25
brcm47xx: use old partition names again for kernel 3.8
...
This fixes sysupgrade. The partition names are used all over the Internet in various howtos.
Thank you russell for spotting this problem.
SVN-Revision: 36235
12 years ago
204bde8d98
brcm47xx: fix error in board detection when nvram is not available.
...
SVN-Revision: 36234
12 years ago
f78c902cfd
kernel: update linux 3.8 to 3.8.6
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36215
12 years ago
98ef9e5411
brcm47xx: generate images for Linksys E.... models
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 36139
12 years ago
31c9452120
brcm47xx: activate image generation for some Netgear devices which are on the market and should be supported.
...
SVN-Revision: 36137
12 years ago
a9e5a178ef
brcm47xx: generate images for more WRT...N models
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 36136
12 years ago
d5cf67297a
brcm47xx: generate images for some more devices
...
These devices should be supported by trunk now.
SVN-Revision: 36099
12 years ago
07532dca7f
kernel: update linux 3.8 to 3.8.3
...
Also refresh the related generic/platform patches.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36039
12 years ago
e1f24d99e1
brcm47xx: refresh config
...
SVN-Revision: 35948
12 years ago
44ed7d664a
brcm47xx: add some more partition parser fixes by Rafał Miłecki
...
SVN-Revision: 35912
12 years ago
694050a4cf
brcm47xx: netconfig: add bacis support for swconfig
...
Parse the cpu port from swconfig and explicitly mark the cpu port as tagged.
SVN-Revision: 35911
12 years ago
04af8bd108
brcm47xx: bgmac: omit the fcs
...
This fixes #13058 and hopefully #12927
SVN-Revision: 35834
12 years ago
9805096f48
brcm47xx: bgmac: update to version form netdev git repository
...
SVN-Revision: 35833
12 years ago
Gabor Juhos