Jonas Gorski
0a62b7c148
bcm63xx: add 3.9 support
...
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 36660
12 years ago
Jonas Gorski
1f4e5f77a0
bcm63xx: Simplify CFE detection.
...
Check bootloader argument in mtd.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
[jogo@openwrt.org: split into two patches, one for detection,
one letting bcm63xxpart use it.]
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 36659
12 years ago
Jonas Gorski
6e2b85b401
kernel: update 3.9 to 3.9.2
...
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 36658
12 years ago
Jonas Gorski
668604f91d
kernel: don't remove of_tables
...
These are needed for OF setup of clocksource, clocks and irqchips.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 36657
12 years ago
Felix Fietkau
56478636aa
ar71xx: remove the xfrm.h chunk from the unaligned access hacks, it breaks ipsec
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36646
12 years ago
Felix Fietkau
144cfb65a4
ar71xx: add hard_cfg offset detection for rb2011 support - fixes wlan on some newer devices
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36631
12 years ago
Felix Fietkau
2c5a5d8736
kernel: add missing PHY ID for an AR8327 switch variant
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36630
12 years ago
Felix Fietkau
eea89fea6a
build: add config symbols for different ARM arch levels
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36620
12 years ago
Jonas Gorski
526aedb705
kernel: move CONFIG_MIPS_SEAD3 to generic
...
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 36617
12 years ago
Jonas Gorski
ed06d2ad5c
bcm63xx: don't build CRAMFS
...
Don't build the CRAMFS file system module in the kernel, and save some bytes.
No bcm63xx board needs this obsolete file system, neither those ones using
the Redboot bootloader (liveboxes). Thus, there is no need to build it, since it has
been replaced long time ago by squashfs.
Signed-off-by: Daniel Gonzalez <dgcbueu@gmail.com>
SVN-Revision: 36616
12 years ago
Jonas Gorski
ccd7fbba87
led and buttons support for board DWV-S0
...
Signed-off-by: Gianluca Agliozzo <gianluca05@hotmail.it>
[jogo@openwrt.org: fixup patch so it actually applies]
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 36615
12 years ago
Jonas Gorski
0a907fdb8a
bcm63xx: remove defconfig support
...
All boards use uci-defaults, no need to keep defconfig support.
SVN-Revision: 36610
12 years ago
Jonas Gorski
bbd02c6fb7
kernel: fix CVE-2013-1763 in older kernels
...
Newer kernels were already fixed by upstream.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 36607
12 years ago
Felix Fietkau
0be8dd36dc
ar71xx: set mips16 support, tune cflags for 34kc (works well on MIPS 24K as well, but helps a lot for 34K and 74K)
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36600
12 years ago
Jonas Gorski
0b03ff2028
kernel: make zlib and lzo modules selectable
...
Fixes building kmod-lib-zlib and kmod-lib-lzo if nothing depends on them.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 36592
12 years ago
Hauke Mehrtens
0b161c6f9e
kernel: b53: use correct oops for bcm5365 switch
...
SVN-Revision: 36589
12 years ago
Jonas Gorski
98f6dc1b43
kernel: allow building zsmalloc as a module again
...
zsmalloc was changed to a bool because of missing exports in the kernel,
but we already export the required symbol, so change it back to tristate.
Closes #13481 .
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 36587
12 years ago
Gabor Juhos
cb3d71ca8e
ar71xx: use combined kernel image in the CameoHornet template
...
This allow us to increase the kernel partition size,
and ensures, that the -factory image still usable via
the original interface.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36584
12 years ago
Gabor Juhos
f938a798f8
ar71xx: add profile and build image for the RNX-N360RT board
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36582
12 years ago
Gabor Juhos
852b8e9490
ar71xx: add user-space model detection for the RNX-N360RT board
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36581
12 years ago
Gabor Juhos
c70694e755
ar71xx: add profile and build image for Netgear WNDAP360
...
[juhosg: this has been created from the following patch:
http://patchwork.openwrt.org/patch/3620/ ]
Signed-off-by: Jacek Kikiewicz <jaceq@aol.pl>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36580
12 years ago
Gabor Juhos
33a2cbfd5c
ar71xx: add user-space support for Netgear WNDAP360
...
[juhosg: this has been created from the following patch:
http://patchwork.openwrt.org/patch/3620/ ]
Signed-off-by: Jacek Kikiewicz <jaceq@aol.pl>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36579
12 years ago
Gabor Juhos
10b3ca5ccb
ar71xx: add kernel support for Netgear WNDAP360
...
Here is corrected version (only thing not working are wifi LEDs).
[juhosg: this has been created from the following patch:
http://patchwork.openwrt.org/patch/3620/ ]
Signed-off-by: Jacek Kikiewicz <jaceq@aol.pl>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36578
12 years ago
Gabor Juhos
39467e78e7
kernel: update linux 3.9 to 3.9.1
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36577
12 years ago
Gabor Juhos
e57c7d6c12
kernel: update linux 3.8 to 3.8.12
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36576
12 years ago
Gabor Juhos
d09ba5ef10
ar71xx: Fix AP135 partition layout
...
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36575
12 years ago
John Crispin
eb10f052ce
lantiq: enable portmaps again and set max port to 2
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36573
12 years ago
John Crispin
036fb79052
ramips: drop 3.7 support
...
Signed-off-by; John Crispin <blogic@openwrt.org>
SVN-Revision: 36572
12 years ago
John Crispin
16a17b318a
ramips: properly setup the FEATURES variable
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36571
12 years ago
John Crispin
bd6e12d904
ramips: fix memory detection rt5350
...
Signed-off-by: Felix Kaechele <felix@fetzig.org>
SVN-Revision: 36568
12 years ago
John Crispin
899120ddef
ramips: enable dsp extensions for rt305x and rt3883
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36567
12 years ago
John Crispin
849ff98669
ramips: fix fypo in ethernet driver rt288x, rt3883
...
Signed-off-by: Serge Vasilugin <vasilugin@yandex.ru>
SVN-Revision: 36565
12 years ago
John Crispin
eddd7f5773
ramips: Update ARC Freestation profile
...
These devices are actually built around the 8devices Carambola dev board.
ARC FreeStation, Flex mARC, iFlex, and SplitStation devices are
supported with this image, see "ARCFlex Firmware Downloads":
http://www.antennas.com/wiki/index.php?title=ARC-OS_Firmware_Downloads_and_Revision_History
Funnily enough if present the external USB wlan ends up being wlan-0, with the
SoC device being wlan-1.
- Invert port map so special handling of vlan config can be removed.
- Add LED config similar to original ArcOS firmware.
- Add GPIO export for enabling PoE passthrough from ethernet port 0 to port 1
- Get MACs from factory partition.
- Update description to list supported devices.
- Carambola uses RT3050 (not RT3052), though my Carambola CPU
actually reports itself as being an RT3350 while still having
RT3050F markings.
Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>
SVN-Revision: 36564
12 years ago
John Crispin
4f1ff28f08
ramips: Support setting active_low in devicetree gpio-export
...
Support setting active_low in devicetree gpio-export.
Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>
SVN-Revision: 36563
12 years ago
John Crispin
6af3b6721b
ralink: unbreak uart pinmux handling
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36562
12 years ago
John Crispin
7c04b3bd66
ramips: fix gpio base numbering
...
make banks 0 based to unbreak userland ABI
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36561
12 years ago
John Crispin
338ff04cab
ramips: add gpio base properties to dtsi files
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36560
12 years ago
John Crispin
65760ede8b
ramips: unbreak rt2880 support
...
Signed-off-by: John Crsipin <blogic@openwrt.org>
SVN-Revision: 36559
12 years ago
John Crispin
28bdb9efe9
ramips: fix DIR-602D1 flash size
...
Fix DIR-620D1 flash size.
Signed-off-by: Serge Vasilugin <vasilugin@yandex.ru>
SVN-Revision: 36558
12 years ago
John Crispin
1c89a60431
ramips: unbreak gpio handling for uart mux group
...
this should fix the handling of corner cases
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36543
12 years ago
Gabor Juhos
bb429757c8
at91: build .dtb file for the CalAmp LMU500 board
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36542
12 years ago
Gabor Juhos
ccf95fe938
ar71xx: Fix AP135 PCI
...
AP135 has a pluggable PCIE slot unlike AP136.
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36541
12 years ago
Felix Fietkau
18c588a570
ar71xx: add an external reset callback for ar913x and use it in ath9k - should reduce the frequency of DMA stop failures
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36530
12 years ago
Felix Fietkau
30c4360345
kernel: do not strip /proc/net/ip_mr_* in the /proc debloat patch, it is used by iproute2
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36529
12 years ago
Jonas Gorski
24636fcabf
bcm63xx: split into two subtargets, generic and SMP
...
Make SMP a subtarget, since it only supports BCM6362 and BCM6368.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 36527
12 years ago
Jonas Gorski
d11efa1428
bcm63xx: add SMP support for BCM6362 and BCM6368
...
BCM6358 requires further work due to its shared TLB.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 36526
12 years ago
Jonas Gorski
8f15326acc
kernel: generic: don't strip /proc/irq on SMP
...
/proc/irq is needed for changing the SMP affinity of interrupts.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 36525
12 years ago
Jonas Gorski
a80a4f3ec2
bcm63xx: fix hsspi flash registration for BCM6362
...
Use busnum 1 for HSSPI so it won't conflict on chips having both SPI
controllers.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 36524
12 years ago
Jonas Gorski
999a956f4c
bcm63xx: fix/enable livebox minipci
...
Signed-off-by: Daniel Gonzalez <dgcbueu@gmail.com>
SVN-Revision: 36523
12 years ago
Jo-Philipp Wich
6ac2b3b76a
atheros: remove static gpio_request() from board setup and include generic kmod-gpio-button-hotplug instead.
...
This change is based on a patch by Karl Palsson <karlp@remake.is>
See http://patchwork.openwrt.org/patch/3536/ .
SVN-Revision: 36513
12 years ago