hsist
/
freifunkist-firmware
6
1
Fork 0
Code Issues Pull Requests Releases Wiki Activity
17011 Commits
1 Branch
0 Tags
164 MiB
Tag: Branch: Tree: 88e0cf0ba4
Branches Tags
${ item.name }
Create tag ${ searchTerm }
Create branch ${ searchTerm }
from '88e0cf0ba4'
${ noResults }
Commit Graph

43 Commits (88e0cf0ba4338f16917860468e610275b7e1e8f1)

Author SHA1 Message Date
Florian Fainelli 8cc16aa14e add support for HW553 bcm6358-based boards (#8844)
14 years ago
Daniel Dickinson 44e22cbd49 Fixed Comtrend CT536_CT5621 board settings. These boards are based on the 96348GW-11 reference design but have different GPIOs therefore we use the board fixups now availabed (thanks the patches by Jonas Gorski) to create a separate board entry for these boards and leave the reference design with reference GPIOs. Also these boards only have enet1 (no enet0) so we set that in the board definition, and use a defconfig for a single interface network.
14 years ago
Daniel Dickinson 8f9b14dafe boards: Added GW6x00 fixups and GPIOs. The GW6200 GPIOs are different than the reference design 96348GW so we use fixup to allow us to define the correct ones, also the GW6000 has no GPIO-controlled leds.
14 years ago
Daniel Dickinson 9677b65cb6 image Makefile: Corrected router imagename length limiting. Thanks KanjiMonster for reminding me.
14 years ago
Daniel Dickinson 314bce63e6 bcm63xx: Add support for the T-Com Speedport W 500V.
14 years ago
Daniel Dickinson 3a49f669f2 bcm63xx: Add board id override fixup.
14 years ago
Daniel Dickinson c51d772e62 bcm63xx: Finalize support for DSL-274xB, rev C2.
14 years ago
Daniel Dickinson 195d1d7446 image Makefile: Removed extraneous tab from Image/LimitName16 macro definition. The solves the strange whitespace in front of the image name in the info1 section
14 years ago
Daniel Dickinson 0c0c1f017f image: Limited image name put into the info1 field to 16 characters and eliminted the OpenWRT revision. This makes using the image (router) name as the board name possible, so that boards with same real boardid but different GPIOs can be detected and the correct GPIOs used.
14 years ago
Daniel Dickinson 049e59a27b Initial support for Telsey CPVA642 boards (no vlans, no DSL, GPIO led/buttons not known).
14 years ago
Daniel Dickinson eadb5c84fa imagetag: Significantly updated brcm63xx imagetag writing tool. * Rewrote commandline parsing code using gengetopt - We now get long options - We have more options including use of the info section for board information (e.g. to add the same boardid but different GPIOs on different routers) * Added back the ability to write stock images (this is useful, for example, when copying the firmware from the in-memory flash, and then being able to create an image that will let you revert to/test stock firmware * Fixed copying of CRCs to use memcpy instead of strncpy (strncpy stops at 0) * Added ability to use all sections of the imagetag, including custom magic signatures (e.g. for the Telsey router I'm adding soon), info sections, and reserved sections * Added putting the router type (as defined in the image generating Makefile) into the info1 section and the filesystem type in the info2 section. This will be used by mtd (when I add the code) to return the name of image used to flash this router. (As requested by Jo, as well as being useful for same boardid different board scenario described above).
14 years ago
Nicolas Thill e2b57ecf5f define a shared IMG_PREFIX variable used as a basename for image files, it contains board & subtarget infos (if appropriate) allowing subtargets to share the same bin directory without overwriting each other's files
15 years ago
Florian Fainelli 2a4fb82289 flashmap and image generation: reduced union bcm_tag to a single struct combining the elements so that it is no longer necessary to create an openwrt-only tagid and tagcrc, and elimate the tagid detection and switch statements which made dealing with imagetags overly complicated, especially since the logic would need analogs in all code that touched the imagetag. Patch from cshore.
15 years ago
Florian Fainelli ada5848ba6 build images for RG100A (bcm6358-based boards) (#6755)
15 years ago
Florian Fainelli 411d1ba1bb do not generate trx images, this is useless
15 years ago
Florian Fainelli 85698765da add support for the Pirelli AG226G board (#5337)
16 years ago
Florian Fainelli dd622864e1 generate images for RTA1025W_16-based routers (#5594)
16 years ago
Florian Fainelli 45c25ff988 generate images for the bcm6338w
16 years ago
Florian Fainelli 1795111337 add imagetag support for BT Voyager 2500V, patch from Daniel Dickinson (#5364)
16 years ago
Florian Fainelli 606193fc1f generate experimental images for bcm6338 boards, thanks to Daniel Dickinson
16 years ago
Florian Fainelli cc12508ee3 use build system REVISION variable (#5317)
16 years ago
Florian Fainelli ca16accfbb The attached patch adds building of firmware images for more routers based on the brcm63xx chipset.
16 years ago
Florian Fainelli 01118457e8 rework imagetag firmware generator and MTD partition parser to accomodate with all known imagetag versions from Broadcom and vendors, patch from Daniel Dickinson (fixes #4987).
16 years ago
Florian Fainelli 1f334e3caa make images that can be flashed using the stock firmware web interface, thanks to Anselmo Luginbuhl and Daniel Dickinson (#4909, #4943)
16 years ago
Felix Fietkau 34939cad39 get rid of $Id$ - it has never helped us and it has broken too many patches ;)
16 years ago
Florian Fainelli 5d5c8300b1 imagetag's -k argument is expected to be hexadecimal instead of decimal (#4885)
16 years ago
Florian Fainelli b865f9b722 add the CFE offset command line option to the imagetag utility, closes (#4366)
16 years ago
Florian Fainelli 6495fa36ea add support for AGPF-S0 (Pirelli Alice Gate VoIP 2 Plus Wi-Fi) #4366
16 years ago
Florian Fainelli 730346e2d5 add support for user9102 boards (#4537)
16 years ago
Florian Fainelli c2c0d74f67 generate images for old CFE based boards like the Davolink DV201
16 years ago
Florian Fainelli 562ff99c2c Build images for Inventel Livebox
16 years ago
Florian Fainelli 4025c12a2d Fix typo, we are not building for the DG834G (ar7) but the DG834GT (brcm6348)
16 years ago
Florian Fainelli 4dc65aed63 Add support for Sagem F@ST2404 (#4332)
16 years ago
Florian Fainelli f3be50a031 Add support for bcm96348gw10 (Netgear DG834GT) (#4319)
16 years ago
Florian Fainelli 107aa04e06 Generate valid images for the bcm96348gw board
16 years ago
Florian Fainelli 0d4286b0b3 This patch is for broadcom 96348GW-11 boards, to get USB and Ethernet working. Also it patches mtd map driver for bcm96xx boards to be sure that CFE1CFE1 code is detected when booting from CFE. (#4201)
16 years ago
Florian Fainelli 691e187381 Add definitions for bcm96350vw, add back bcm63xx mtd driver, be careful when testing with 8MB devices
16 years ago
Felix Fietkau 2dfabe3991 bcm963xx: image generation using image tagger
17 years ago
Felix Fietkau 46b4413fbb bcm963xx: fix load address / kernel entry
17 years ago
Nicolas Thill e3a42b23c6 enable proper PCI & USB support detection at config-time by disabling CONFIG_PCI & CONFIG_USB entries in generic/config and enabling them on targets where appropriate
17 years ago
Florian Fainelli 62240465c4 brcm63xx image generation cleanups (#3169)
17 years ago
Felix Fietkau 1bca0cc517 make the image filenames a bit shorter
17 years ago
Felix Fietkau 56231056ea strip the kernel version suffix from target directories, except for brcm-2.4 (the -2.4 will be included in the board name here). CONFIG_LINUX_<ver>_<board> becomes CONFIG_TARGET_<board>, same for profiles.
17 years ago