1472eaec65
dnsmasq: backport some dnssec fixes
...
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 43758
10 years ago
570fe5c662
kernel: disable soft-reset for generic PHY devices to avoid accidentally clearing preinitialized state
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43757
10 years ago
c12ac30870
buffalo-enc: pass the longstate option to decryption
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43756
10 years ago
8e8437103c
buffalo-enc: accept the longstate command line option
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43755
10 years ago
e7d7f59171
bcm53xx: support WAN connected to switch port 0
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43754
10 years ago
0847247129
mvsw6171: note support for 88E6172 switches
...
The '6171 and '6172 are similar enough to work
without any changes to the code.
Signed-off-by: Claudio Leite <leitec@staticky.com>
SVN-Revision: 43753
10 years ago
873202fc0b
kirkwood: add *plugs to uci-defaults
...
Set defaults health led to a timer heartbeet (200/800)
and populate network for:
- GuruplugServerPlus
- SheevaPlug
- SheevaPlug with eSATA
Signed-off-by: Gerald Kerma <dreagle@doukki.net>
SVN-Revision: 43752
10 years ago
39743e45f8
kikwood: populate kirkwood.sh with new boards
...
- SheevaPlug
- SheevaPlug with eSATA
- GuruplugServerPlus
Signed-off-by: Gerald Kerma <dreagle@doukki.net>
SVN-Revision: 43751
10 years ago
ec9a0f898a
kirkwood: set default EA4500 switch config
...
This maps the LAN ports to eth0 and WAN port to eth1.
Since there are two interfaces the 802.1q VLAN mode
is unnecessary and left disabled. Port-based VLANs
are used instead.
Signed-off-by: Claudio Leite <leitec@staticky.com>
SVN-Revision: 43750
10 years ago
abca0462d3
kernel: bgmac: fix some problems
...
There are some problems in the napi usage that are fixed now.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 43749
10 years ago
192e945479
bcm53xx: PCIe: add link check again
...
When there is no device connected to the controller we should not start
the controller. This also changes between PCIe 1.0 and PCIe 2.0 speed
based on the device. This code is based on code from the new Broadcom
PCIe controller driver.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 43748
10 years ago
180c1f3302
uboot-envtools: add more kirkwood boards
...
- SheevaPlug
- SheevaPlug with eSATA
- GuruplugServerPlus
Signed-off-by: Gerald Kerma <dreagle@doukki.net>
SVN-Revision: 43747
10 years ago
4ccf215a3e
ar7: remove leftover 3.10 patches
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43746
10 years ago
0e035381dc
binutils: break-out libbfd, libopcodes and ar
...
Package libbfd, libopcodes and ar seperately.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 43745
10 years ago
4571fc780d
ar71xx: add support for qca956x soc
...
This patch adds soc support for QCA9561 and TP9343.
TP9343 is a reduced version of QCA9561, which can be found in TP-LINK routers in China.
The qca956x_wmac has not yet been supported by ath9k.
tested on TL-WDR6500 and TL-WR882N v1 (Chinese version)
Signed-off-by: Weijie Gao <hackpascal@gmail.com>
SVN-Revision: 43744
10 years ago
2f9b042d69
ar8216: Inline function ar8xxx_create_mii
...
Inline function ar8xxx_create_mii.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
SVN-Revision: 43743
10 years ago
2289c7a010
ar8216: Remove read/write/rmw member functions from ar8xxx_priv
...
Remove read/write/rmw member functions from ar8xxx_priv
There seems to be no real benefit of the ar8xxx_priv member functions
read/write/rmw as one implementation exists for each of them only.
Especially ar8xxx_mii_rmw is assigned to priv->rmw first and then
mapped to ar8xxx_rmw.
Rename the ar8xxx_mii_.. functions to ar8xxx_.. and use them directly.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
SVN-Revision: 43742
10 years ago
45a494b808
ar8216: Create helpers mii_read32 / mii_write32 for 32 bit MII ops
...
Create helpers mii_read32 / mii_write32 for 32 bit MII ops.
Rename r3 variable to page in ar8xxx_mii_write to make it consistent
with the other ar8xxx_mii_xxxx functions.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
SVN-Revision: 43741
10 years ago
0e7f844c66
ar8216: Factor out chip-specific parameters from ar8xxx_probe_switch
...
Factor out chip-specific parameters from ar8xxx_probe_switch.
Move the ar8xxx_chip definitions after the swops definitions.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
SVN-Revision: 43740
10 years ago
054767cebc
ar8216: remove unused function parameter in ar8327_led_register
...
Remove unused function parameter in ar8327_led_register.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
SVN-Revision: 43739
10 years ago
e21e9c5548
bcm53xx: backport spi-nor changes and update bcm53xxspiflash
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43738
10 years ago
d27c682def
kernel: disable multicast-to-unicast translation for ipv6 neighbor solicitation ( #17625 )
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43736
10 years ago
309e74b86d
kirkwood: add sheevaplug and derivatives
...
Add kirkwood FDT:
- SheevaPlug
- SheevaPlug with eSATA
- GuruplugServerPlus
- Topkick1281P2
Signed-off-by: Gérald Kerma <drEagle@doukki.net>
SVN-Revision: 43735
10 years ago
211cac98d5
Belkin AC 1750 DB (F9K1115v2) support
...
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 43734
10 years ago
d9011ad6be
dnsmasq: allow de-selecting features from -full variant.
...
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
SVN-Revision: 43733
10 years ago
f0ecc0ec37
iproute2: bump version from 3.16.0 to 3.17.0
...
Signed-off-by: Russell Senior <russell@personaltelco.net>
SVN-Revision: 43731
10 years ago
5628648f87
nftables: bump to release 0.4, cleanup our patches
...
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 43730
10 years ago
c6c0c275bc
libnftnl: bump to upstream release 1.0.3
...
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 43729
10 years ago
21bf45edd2
cyassl: bump to 3.3.0
...
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 43728
10 years ago
f6f0984c43
build: prevent spurious host-build re-builds by touching .built after the install command before touching .installed
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43721
10 years ago
0ffb7323d0
ralink: remove partitoon map from mt7621.dtsi
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43720
10 years ago
dd9ca05249
bcm53xx: sysupgrade support for devices with serial flash
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43719
10 years ago
c3e9796cd5
brcm47xx: extract magics from specific upgrade images (and still reject them)
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43718
10 years ago
40e2dbf9c6
fstools: update to latest git HEAD
...
adds a few cleanups and extroot/ubi support
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43717
10 years ago
f8e83b1057
uboot-envtools: enable UBI support per default on oxnas
...
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 43716
10 years ago
019ea725aa
add "preinit_regular" diag.sh set_state argument
...
This new argument is used right after starting regular preinit (which
happens if failsafe wasn't triggered). The main purpose of "preinit"
argument is to indicate that failsafe can be triggered, however we were
missing a way to inform user that we don't wait for a trigger anymore.
With this change it's clear when failsafe mode can be triggered.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43715
10 years ago
a5b6b7e419
brcm47xx: detect (and still reject for now) CyberTAN fw format
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43714
10 years ago
f310e02ab3
procd: update to latest git HEAD
...
fixes a bug where wdt write happened with no valid fd available
--> procd: WDT failed to write: Bad file descriptor
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43711
10 years ago
8aa9160274
nftables: mini-bump and patch cleanup
...
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 43710
10 years ago
fbea00b031
ramips: update mtd patches to apply after changes from r43700
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43709
10 years ago
b5b4bdc066
brcm47xx: use separated function in upgrade to detect file type
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43708
10 years ago
c927daaf76
nftables: bump to latest git, fix mini-gmp patches
...
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 43707
10 years ago
e90e143852
libnftnl: bump to latest git
...
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 43706
10 years ago
2db6da5532
kirkwood: enable EA4500 switch on 3.18
...
Signed-off-by: Claudio Leite <leitec@staticky.com>
SVN-Revision: 43704
10 years ago
374ab9decc
gemini: update usb driver and merge registers into one patch
...
Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 43703
10 years ago
fef7b4241f
gemini: merge register ethernet patches into one
...
Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 43702
10 years ago
6f2b7567b8
ralink: drop old pinmux nodes from dts files
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43701
10 years ago
b1bfed548c
kernel: warn users to use the new (dedicated) firmware splitter
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43700
10 years ago
d54e759611
toolchain: do not include libatomic.so in the libc package
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43699
10 years ago
0f51d48c0e
nvram: remove libnvram.so, it is unused and incompatible to the broadcom API anyway
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43698
10 years ago
Steven Barth