Felix Fietkau
5eed1d8f6b
enable netifd by default and add its config variable to PKG_CONFIG_DEPENDS in a few relevant places
...
SVN-Revision: 31730
13 years ago
John Crispin
6db7b50cec
comgt: Add scripts to comgt to retrieve the IMSI and CNUM to identify the SIM card.
...
Signed-off-by: Daniel Golle <dgolle@allnet.de>
SVN-Revision: 29365
13 years ago
Felix Fietkau
b58d54f621
comgt: add missing file ( fixes #10301 )
...
SVN-Revision: 28648
13 years ago
Felix Fietkau
5601dc5f38
comgt: fix pin code config option
...
SVN-Revision: 28637
13 years ago
Felix Fietkau
3eea31fc6d
comgt: delay 3g bringup for sierra wireless cards until the card has locked on to the carrier, this helps with avoiding firmware hangs (thx, chris)
...
SVN-Revision: 28636
13 years ago
Felix Fietkau
d495281b6e
comgt: port 3g.sh to netifd
...
SVN-Revision: 28634
13 years ago
Felix Fietkau
49b905a2cf
comgt: clean up patch, rename gcom binary to comgt, but add a compatibility symlink
...
SVN-Revision: 27699
14 years ago
Jo-Philipp Wich
9736cfef66
comgt: add tty hotplug remove handling, only iterate each tty once ( #9211 )
...
SVN-Revision: 26816
14 years ago
Jo-Philipp Wich
29392373f3
comgt: move ifup invocation back into background subshell to prevent hotplug deadlocks
...
SVN-Revision: 26810
14 years ago
Jo-Philipp Wich
549067e2b4
comgt: move 3g hotplug handling to tty subsystem, fixes race on coldplug ( #9211 )
...
SVN-Revision: 26809
14 years ago
Jo-Philipp Wich
d0ac4ba89a
comgt: handle ttyHS* devices in usb hotplug, fix typo ( #9046 )
...
SVN-Revision: 26175
14 years ago
Florian Fainelli
d40a79ccfd
comgt: add ACM hotplug
...
This adds in support for ttyACM devices in the 3g hotplug script.
Signed-off-by: Matthew Eaton <wrt at divinehawk.com>
SVN-Revision: 25621
14 years ago
Nicolas Thill
79caead3e3
package/comgt: only set pincode if it's supplied ( closes : #7334 ), bump release number
...
SVN-Revision: 22561
14 years ago
Markus Wigge
4e1c5b8ba2
LED handling fixes for WRT54-G3Gv2
...
SVN-Revision: 22462
14 years ago
Jo-Philipp Wich
eccba67e0a
comgt: add usb hotplug handler to bring up 3g ifaces on boot or when the dongle is attached
...
SVN-Revision: 22061
15 years ago
Jo-Philipp Wich
f6f89817e3
comgt: remove obsolete iptables support code
...
SVN-Revision: 21574
15 years ago
Jo-Philipp Wich
085b2b9ad6
comgt: - localize variables - bring scripts in sync with updated ppp logic - bump package revision
...
SVN-Revision: 21285
15 years ago
Jo-Philipp Wich
b1e7cd577b
cleanup Makefiles ( #7212 )
...
SVN-Revision: 21107
15 years ago
Gabor Juhos
7675a3685a
package/comgt: refresh patches
...
SVN-Revision: 20457
15 years ago
Felix Fietkau
34939cad39
get rid of $Id$ - it has never helped us and it has broken too many patches ;)
...
SVN-Revision: 15242
16 years ago
Andy Boyett
cd0cd14421
change LEDs on wrt54g3g only /proc/diag is not available on x86, so check for existance to avoid errors... Thanks Markus Wigge
...
SVN-Revision: 14044
16 years ago
Travis Kemen
1a47f8142d
This series of patches closes the support gap on one of the explicitly supported platforms (WRT54G3G) by adding direct support for the Sierra Wireless 3G modems. Signed-off-by: RB <aoz.syn@gmail.com>
...
SVN-Revision: 11898
17 years ago
Felix Fietkau
081ebaca76
fix the 3g interface configuration
...
The first problem is the "chat" command which misses "-E", so the
environment variable addressed inside the script is never used and
the script breaks.
The second problem is the that you cannot assume an Option card when
you did "not discover a Novatel".
In my case the script tried to set the mode with the Option
AT-command which failed on the Huawei stick.
Unfortunaltely I don't have a correct command for that device, so I
just want to start the connection without any mode set before thus using
the defaults.
Signed-off-by: Markus Wigge <mwigge@marcant.net>
SVN-Revision: 10774
17 years ago
Florian Fainelli
752737ff5b
Allow more ttyUSB<N> devices to use the 3g script ( #3098 )
...
SVN-Revision: 10396
17 years ago
Felix Fietkau
738d610209
Add CDMA/EVDO support to comgt package
...
This patch adds a chat script and makes some modifications to
/lib/network/3g.sh to enable seamless use of CDMA/EVDO modems in
addition to the existing GPRS/UMTS support. Modifications to 3g.sh
are:
- Added 'chat' variable to point at the appropriate script
- Added 'evdo' and 'cdma' as acceptable 'service' values, and skip
the whole gcom initialization bit
- Changed pppd connection speed from 460800 to more widely supported
115200; in my experience, this is not your actual connection speed,
but at what speed pppd sends setup commands to the interface.
This kinda eliminates the need for /etc/ppp/3g.connect - I think I've
replaced that functionality, but in a slightly more standardized
method, using the 'connect' variable understood by PPP.
Signed-off-by: RB<aoz.syn@gmail.com>
SVN-Revision: 10347
17 years ago
Florian Fainelli
aadbdb185f
Allow /dev/ttyUSB2 as wan device for 3g ( #2269 )
...
SVN-Revision: 8717
17 years ago
Nicolas Thill
34bb4638e7
move package description to a separate definition, remove it when DESCRIPTION=TITLE
...
SVN-Revision: 8659
17 years ago
Felix Fietkau
9114220553
refresh all package patches in the buildroot using quilt
...
SVN-Revision: 7490
18 years ago
Felix Fietkau
24faf55360
add file type autodetection for the unpack command and nuke PKG_CAT:= in lots of places
...
SVN-Revision: 6582
18 years ago
Felix Fietkau
a44c286fdb
nuke mdev and replace it with hotplug2 :)
...
SVN-Revision: 6512
18 years ago
Florian Fainelli
32ac162630
Upgrade comgt to 0.32 ( #1347 )
...
SVN-Revision: 6323
18 years ago
Felix Fietkau
c2211dc51e
replace lots of manual install commands with INSTALL_* variables
...
SVN-Revision: 5624
18 years ago
Felix Fietkau
ccc401e49e
comgt: make firewalling changes when umts goes up or down
...
SVN-Revision: 5476
18 years ago
Felix Fietkau
8cc785bdf6
move comgt to trunk and add network scripts for umts compatible with the wrt54g3g
...
SVN-Revision: 5433
18 years ago