Gabor Juhos
9c8a5ef115
kernel: update 3.10 to 3.10.13
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38228
11 years ago
Felix Fietkau
ef68210f93
build: unify x86 target cflags
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38212
11 years ago
Gabor Juhos
554772a665
kernel: update 3.10 to 3.10.12
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38000
11 years ago
Gabor Juhos
d120ec18b2
kernel: update 3.10 to 3.10.10
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37890
11 years ago
Gabor Juhos
968ed2e58a
x86/alix2: remove kernel config for 3.8
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37870
11 years ago
Gabor Juhos
5aa70d283f
x86/alix2: switch to 3.10.9
...
Taken from the 'alix2: update to LINUX_VERSION 3.10.9'
patch: http://patchwork.openwrt.org/patch/3971/ .
Russell says in the original patch:
"Initial whack at updating alix2 to a current kernel. It builds
and runs without problems so far. I copied target/linux/config-3.8,
target/linux/x86/alix2/config-3.8, and target/linux/patches-3.8 to
their 3.10 equivalents and tweaked until it built. The patches
required no changes."
Signed-off-by: Russell Senior <russell@personaltelco.net>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37869
11 years ago
Gabor Juhos
562e76d22c
x86/alix2: add kernel config for 3.10
...
Taken from the 'alix2: update to LINUX_VERSION 3.10.9'
patch: http://patchwork.openwrt.org/patch/3971/ .
Russell says in the original patch:
"Initial whack at updating alix2 to a current kernel. It builds
and runs without problems so far. I copied target/linux/config-3.8,
target/linux/x86/alix2/config-3.8, and target/linux/patches-3.8 to
their 3.10 equivalents and tweaked until it built. The patches
required no changes."
The current patch contains additional configuration tweaks.
Signed-off-by: Russell Senior <russell@personaltelco.net>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37868
11 years ago
Gabor Juhos
77e00faa33
x86/alix2: add kmod-usb2-pci to default packages
...
The USB controller is sitting on the PCI bus and
without the package the EHCI controller is not
usable.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37835
11 years ago
Jonas Gorski
1beaf031d1
target: don't build jffs2 nor images by default
...
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 36863
12 years ago
Gabor Juhos
46225b99d9
kernel: update linux 3.8 to 3.8.13
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36724
12 years ago
Gabor Juhos
e57c7d6c12
kernel: update linux 3.8 to 3.8.12
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36576
12 years ago
Gabor Juhos
8a9fe26f20
kernel: update linux 3.8 to 3.8.11
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36507
12 years ago
Gabor Juhos
f718179af5
kernel: update linux 3.8 to 3.8.10
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36493
12 years ago
Gabor Juhos
36d4fd70bc
kernel: update linux 3.8 to 3.8.9
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36453
12 years ago
Steven Barth
4e8f7f37ed
Change default IPv6 config to enable DHCPv6-PD
...
SVN-Revision: 36384
12 years ago
Gabor Juhos
151cadfe32
kernel: update linux 3.8 to 3.8.8
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36363
12 years ago
Gabor Juhos
604395650a
kernel: update linux 3.8 to 3.8.7
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36332
12 years ago
Steven Barth
ea94d66b0f
Adapt default network configuration for IPv6
...
SVN-Revision: 36278
12 years ago
Gabor Juhos
71a51e3b91
x86/alix2: remove old kernel configs
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36253
12 years ago
Gabor Juhos
15d311ec18
x86/alix2: switch to 3.8
...
Tested on an alix2d13 board.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36252
12 years ago
Gabor Juhos
9d05b1b683
x86/alix2: add config for 3.8
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36251
12 years ago
Hauke Mehrtens
45b24fa771
kernel: add some missing config options found by the buildbot.
...
SVN-Revision: 35945
12 years ago
Gabor Juhos
23b3b3a194
kernel: update linux 3.7 to 3.7.10
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35860
12 years ago
Gabor Juhos
3f749d1e8e
kernel: update linux 3.7 to 3.7.9
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35644
12 years ago
Gabor Juhos
162b8e23a5
kernel: update linux 3.7 to 3.7.8
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35604
12 years ago
Gabor Juhos
bae4bfe3f8
kernel: update linux 3.7 to 3.7.7
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35571
12 years ago
Gabor Juhos
08ff976720
kernel: update linux 3.7 to 3.7.6
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35476
12 years ago
Gabor Juhos
ab3e3cacaa
alix2: convert from kernel version 3.3.8 to 3.7.5
...
[juhosg: use 3.7.5 instead of 3.7.3]
Signed-off-by: Russell Senior <russell@personaltelco.net>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35457
12 years ago
Felix Fietkau
741f6ba7ef
x86: fix typo in alix2/net5501 default packages
...
SVN-Revision: 34972
12 years ago
Gabor Juhos
07b5a3eea2
x86: remove support for old kernels
...
SVN-Revision: 31804
13 years ago
Gabor Juhos
604e3aac0a
x86: remove subtarget specific LINUX_VERSION overrides
...
SVN-Revision: 31803
13 years ago
Gabor Juhos
eb2fe5e863
x86/alix2: switch to 3.3
...
Compile tested only.
SVN-Revision: 31753
13 years ago
Gabor Juhos
19f691f8e4
x86: sync 3.2 configs
...
SVN-Revision: 31750
13 years ago
Gabor Juhos
39994008cb
linux: move certain disabled symbols to the generic configs
...
* CONFIG_ARCH_DMA_ADDR_T_64BIT
* CONFIG_ARCH_HAS_ILOG2_U32
* CONFIG_ARCH_HAS_ILOG2_U64
* CONFIG_ARCH_PHYS_ADDR_T_64BIT
* CONFIG_ARCH_SUPPORTS_MSI
* CONFIG_GENERIC_CPU_DEVICES
* CONFIG_HWMON_DEBUG_CHIP
* CONFIG_I2C_PXA_PCI
* CONFIG_LEDS_GPIO
* CONFIG_MINIX_FS_NATIVE_ENDIAN
* CONFIG_MLX4_CORE
* CONFIG_POWER_SUPPLY
* CONFIG_POWER_SUPPLY_DEBUG
* CONFIG_QUOTACTL
* CONFIG_SDIO_UART
* CONFIG_SENSORS_K10TEMP
* CONFIG_SENSORS_SCH56XX_COMMON
* CONFIG_SENSORS_VIA_CPUTEMP
* CONFIG_SERIO_AMBAKMI
* CONFIG_SERIO_I8042
* CONFIG_SERIO_LIBPS2
* CONFIG_SERIO_PCIPS2
* CONFIG_SERIO_RAW
* CONFIG_SERIO_SERPORT
* CONFIG_SPI_BITBANG
* CONFIG_SPI_GPIO
SVN-Revision: 31737
13 years ago
Jonas Gorski
22b4e6b882
kernel: update linux 3.2 to 3.2.16
...
SVN-Revision: 31459
13 years ago
Jonas Gorski
d0bfc67e2e
kernel: x86: also update subtarget kernel versions
...
SVN-Revision: 31338
13 years ago
Jo-Philipp Wich
884f964e62
alix2: add require crypto kmods ( #10410 )
...
SVN-Revision: 30980
13 years ago
Vasilis Tsiligiannis
834be6c1fe
alix2, geos: Adjust CFLAGS
...
Clone of CFLAGS change from r30013 into Geos and Alix platforms.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
SVN-Revision: 30353
13 years ago
Jo-Philipp Wich
c433bfb571
disable additional PATA drivers in global 3.2 and 3.3 config, remove redundant symbols from alix2 config
...
SVN-Revision: 30024
13 years ago
Jo-Philipp Wich
7a36f3d2ff
x86: move additional oddball PATA drivers These should only be enabled in the generic image, as they bloat all of the other targets. Also add symbols for NET5501, ALIX, and GEOS which were added backported to 3.2 and 3.3. Restore PC speaker to Geos target. Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
...
SVN-Revision: 30019
13 years ago
Jo-Philipp Wich
7a9e4ffe8e
alix2, geos, net5501: remove kmod-ledtrig-netfilter, its not used by any standard system facility
...
SVN-Revision: 30000
13 years ago
Jo-Philipp Wich
bf8bb9b661
alix2, goes, net5501: clean up default packages Remove packages which are dependencies of other packages Remove packages which are part of the default package list Remove DSL specific packages from net5501 Remove bridge package, we use the busybox applet Replace hostapd with wpad
...
SVN-Revision: 29999
13 years ago
Jo-Philipp Wich
047ba1e12e
alix2, net5501: bump both subtargets to Linux 3.2.2 to align with the rest
...
SVN-Revision: 29998
13 years ago
Jo-Philipp Wich
3310df6b52
alix2: correct h/w configuration Bump to version 3.2. Simplify and correct kernel config (based on x86/config-3.2). Drop obsolete CS5535 GPIO driver.
...
[Patch from Philipp Prindeville, via http://patchwork.openwrt.org/patch/1804/ ]
SVN-Revision: 29981
13 years ago
Jo-Philipp Wich
be49daffc8
base-files, target: assign name to system timeserver section, makes it easier to set servers on the cli
...
SVN-Revision: 28933
13 years ago
Jo-Philipp Wich
d6f02b62d4
add timeserver config to target specific system configs as well
...
SVN-Revision: 28750
13 years ago
Daniel Dickinson
c0a625ffbf
Add patch for linux-3.0 as well.
...
Fix typo from previous submission with input-keys-polled.
Philip Prindeville - 2011-10-03 01:44:55
SVN-Revision: 28356
13 years ago
Daniel Dickinson
541aa8e38e
A lot of these options get set automatically when Geode is selected.
...
Don't make the config more complicated than it needs to be.
Philip Prindeville - 2011-08-29 03:15:27
SVN-Revision: 28353
13 years ago
Florian Fainelli
d2652dee9d
update alix2 platform driver
...
Add support for Ed Wildgoose's alix platform driver plus my
enhancement to add GPIO soft button support.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
SVN-Revision: 28081
13 years ago
Daniel Dickinson
7ef004a144
Add packages that will be relant as "There's a new Alix platform driver hitting linux-next upstream. Get ready for it in 2.6.39.4 and 3.0.
...
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>"
SVN-Revision: 27929
13 years ago