23 Commits (58a5102338f7fde82c0a025d99f044868c979d02)

Author SHA1 Message Date
Florian Fainelli b7f8e1276d add support for 'MAGIC' bcm6348-based board 14 years ago
Florian Fainelli 2d3ed6dc2d fix T-Com Speedport W 500V default config 14 years ago
Daniel Dickinson 6ee5411686 base-files: Added uci-defaults script to run mtd fixtrx on firstboot for devices that need it. 14 years ago
Daniel Dickinson 44e22cbd49 Fixed Comtrend CT536_CT5621 board settings. These boards are based on the 96348GW-11 reference design but have different GPIOs therefore we use the board fixups now availabed (thanks the patches by Jonas Gorski) to create a separate board entry for these boards and leave the reference design with reference GPIOs. Also these boards only have enet1 (no enet0) so we set that in the board definition, and use a defconfig for a single interface network. 14 years ago
Daniel Dickinson 8f9b14dafe boards: Added GW6x00 fixups and GPIOs. The GW6200 GPIOs are different than the reference design 96348GW so we use fixup to allow us to define the correct ones, also the GW6000 has no GPIO-controlled leds. 14 years ago
Daniel Dickinson e5ca4d81f4 Remove patch 140-new_bcm96348gw_leds because it is really the GW6200 leds, not the generic 96348GW. Another commit will add the GW6200 specific boardid and leds. This removal reverts the 96348GW leds to the reference design GPIOs. 14 years ago
Daniel Dickinson ad24e14b35 base-files: Added the preinit information for reset button and preinit indication led, and preinit interface 14 years ago
Daniel Dickinson 7129521696 base-files: Added network defconfig because board only has one ethernet (4-port switch) 14 years ago
Daniel Dickinson 314bce63e6 bcm63xx: Add support for the T-Com Speedport W 500V. 14 years ago
Daniel Dickinson c51d772e62 bcm63xx: Finalize support for DSL-274xB, rev C2. 14 years ago
Daniel Dickinson 8fa9b24a4c bcm63xx: Allow 'colored' power leds. 14 years ago
Daniel Dickinson fec30c8c80 bcm63xx: Don't hardcode the switch ethernet interface in preinit. 14 years ago
Daniel Dickinson b1b318750a bcm63xx: Add defconfigs. 14 years ago
Daniel Dickinson a5fdf57a1b base-files: diag.sh: For power button as preinit status led, end with led left on, not off 15 years ago
Daniel Dickinson d391ca2c8c base-files: brcm63xx.sh: Added comtrend (96348GW-11) to routers with buttons and leds on preinit 15 years ago
Daniel Dickinson 40c53c6556 brcm63xx: Fixed vlan packet leakage in preinit for known devices with a switch on eth1 (currently only 96348GW - Tecom 6x00) 15 years ago
Daniel Dickinson 82edb6eafa brcm63xx: Added preinit reset button module loading for devices known to support it and for which /lib/brcm63xx.sh has the definitions (currently only 96348GW - Tecom 6x00) 15 years ago
Daniel Dickinson cc8fba8441 brcm63xx: Added LED code for preinit (/etc/diag.sh) for 96348GW (Tecom 6x00) 15 years ago
Daniel Dickinson bd8cfa63f4 brcm63xx: Added preinit board-type detection (currently only 96348GW - Tecom 6x00) 15 years ago
Florian Fainelli a0a85ba7c6 we are using the default-on trigger for power LEDs, no need to change their state from userspace 16 years ago
Florian Fainelli ecad504c39 register GPIO-connected LEDs for known boards 16 years ago
Florian Fainelli 0d7f5f8d2c add support for sysupgrade (#5117) 16 years ago
Florian Fainelli 4fc7535fc7 Make 4-port LAN and 1 port wan configurations work 16 years ago