babd5aa2fc
linux/3.8: add missing config symbols
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35726
12 years ago
3010a0b616
generic: b53: clear SM_SW_FWD_MODE unconditionally when enabling VLAN
...
Setting this bit stops BCM53125 (bgmac actually) from receiving any
packets. This bit is cleared conditionally in b53_switch_reset and it
seems the same is done in bcmrobo.c which never sets that bit again.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 35723
12 years ago
23e71c56ba
generic: b53: remove empty spaces
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 35722
12 years ago
7d0d29ab6e
linux/3.8: add missing Kconfig symbols
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35686
12 years ago
ed0f43f1e2
kernel: update linux 3.8-rcX to 3.8
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35672
12 years ago
451dd745bd
generic: ar8216: cleanup function/variable names
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35642
12 years ago
51996304c4
generic: ar8216: rename struct ar8216_priv to ar8xxx_priv
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35641
12 years ago
1a8218d6e4
brcm47xx: add initial support for kernel 3.8
...
This contains the following new bigger changes:
* new partition parser which still could lake some features or have bugs
* new nand flash driver
* using physmap-flash flash driver for parallel flash
* some changes to the serial flash driver
With these changes OpenWrt starts using more of the mainline flash drivers.
SVN-Revision: 35632
12 years ago
dd77663fb0
kernel: add missing config options
...
r35336 exposed PTP, which has additional drivers on ixp4xx, causing it to
not build with PTP enabled.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 35611
12 years ago
162b8e23a5
kernel: update linux 3.7 to 3.7.8
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35604
12 years ago
f35c369710
generic: ar8216: move PHY4 RGMII workaround code out of the loop
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35603
12 years ago
d64888ffc0
generic: ar8216: register the switch from the probe routine
...
Currently the switch gets registered when an ethernet
driver connects to a PHY of the switch. This method does
not work with the ethernet drivers which are connecting
to the PHY from their ndo_open callback. With those
ethernet drivers, the driver tries to register the switch
each time when the etherned device is opened and this causes
a deadlock.
Move the switch registration into the probe routine to fix
this problem.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35602
12 years ago
bae4bfe3f8
kernel: update linux 3.7 to 3.7.7
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35571
12 years ago
9525a075c1
ar8216: remove superfluous code from ar8216_config_init
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35562
12 years ago
9c86d268eb
generic: ar8216: don't use ethernet device name in register_switch
...
The switches are accessed via an MDIO bus. Set the alias
to the name of the MDIO bus, and show that in the message
along with the name of the switch switch device.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35560
12 years ago
3f3eba88f6
generic: ar8216: reuse the private data from ar8216_probe
...
The private data of the switch is already
allocated in ar8216_priv, assign that to
each PHY on the same MDIO bus. Also remove
the redundant code from ar8216_config_init.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35559
12 years ago
1afb759b35
generic: ar8216: use phydev instead of pdev everywhere
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35555
12 years ago
0b1fe07e8e
generic: ar8216: use pr_* macros for kernel messages
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35554
12 years ago
eea297884e
generic: ar8216: fix PHY features setup
...
Sujith says:
This commit breaks the WAN port on my AP96 - DHCP fails.
Reverting it fixes the issue.
commit b67cc3a0cdd02973610d4d5a63226d1c44841e94
Author: juhosg <juhosg@3c298f89-4303-0410-b956-a3cf2f4a3e73>
Date: Fri Feb 8 09:13:18 2013 +0000
generic: ar8216: simplify phy features setup
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@355183c298f89-4303-0410-b956-a3cf2f4a3e73
This change restores the previous behaviour and moves
the code into the ar8216_probe function.
Reported-by: Sujith Manoharan <sujith@msujith.org>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Tested-by: Sujith Manoharan <sujith@msujith.org>
SVN-Revision: 35549
12 years ago
617076c613
generic: ar8216: add ar8xxx_probe_switch helper
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35547
12 years ago
98b13e39ac
generic: ar8216: rename ar8xxx_mib_cleanup to ar8xxx_mib_stop
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35546
12 years ago
f97170a720
generic: ar8216: free mib counters from ar8xxx_free
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35545
12 years ago
7924e517af
generic: ar8216: add ar8xxx_free helper
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35544
12 years ago
77b3c551c4
generic: ar8216: add ar8xxx_create{,mii} helpers
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35543
12 years ago
5f70b1db2a
generic: ar8216: remove redundant phy address check
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35542
12 years ago
14fd37258b
generic: ar8216: only set phy_ptr if packet mangling is used
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35541
12 years ago
393163b098
generic: ar8216: add defines for the AR8316 POSTRIP register
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35539
12 years ago
5ed480598d
generic: ar8216: don't probe the chip multiple times
...
It is only needed when the private data is allocated.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35538
12 years ago
774da6c7a4
generic: ar8216: add sanity check to ar8216_probe
...
Verify that the mdio bus has PHY devices with
a supported PHY ID at address 0-4.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35537
12 years ago
4720c75cf7
generic: ar8216: skip probe on unused PHY addresses
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35536
12 years ago
eedc3554fe
generic: b53: fix reverted error check in probe
...
b53_switch_detect returns value returned by b53_read8, which is 0 for
success. So fail (and return error) only if b53_switch_detect returned
something else than 0. This fixes supported and advertising being zeros
for MDIO access.
Cc: Jonas Gorski <jogo@openwrt.org>
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 35534
12 years ago
de123c4409
generic: ar8216: move sleep out of the loop
...
It is enough to sleep once after ANEG is enabled on
all PHYs. This reduces boot time on boards with
AR8316 switch.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35532
12 years ago
aa04441904
generic: ar8216: simplify phy features setup
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35518
12 years ago
9c1f95a416
generic: ar8216: don't use mdio bus specific functions in ar8216_id_chip
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35517
12 years ago
5393efc0c7
generic: ar8216: use inline function to convert swdev to ar8216
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35514
12 years ago
b87a1c757d
generic: ar8216: add mii_bus field to struct ar8216_priv
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35513
12 years ago
c130a3feac
generic: mvswitch: add detach callback
...
Use the detach callback to disable packet mangling
to avoid possible NULL pointer dereference.
Compile tested only.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35512
12 years ago
4be8c22e74
generic: ar8216: add detach callback
...
The current code uses the 'remove' callback to disable
packet mangle on the underlying ethernet device.
However the attached_dev is always NULL when the
'remove' callback is called by phylib, and this causes
NULL pointer dereference, like this:
[ 475.300000] CPU 0 Unable to handle kernel paging request at virtual address 000000f0, epc == 801cdcf0, ra == 801c7eac
[ 475.310000] Oops[#1 ]:
[ 475.310000] Cpu 0
[ 475.310000] $ 0 : 00000000 00000000 00000000 00000001
[ 475.310000] $ 4 : 828dde00 00000005 828dde08 ffffffff
[ 475.310000] $ 8 : 00380081 00380081 82902a40 00000001
[ 475.310000] $12 : 00000037 00370081 00000001 00000000
[ 475.310000] $16 : 82865000 828dde08 828dde00 00000001
[ 475.310000] $20 : 00000080 00460000 00000002 77151448
[ 475.310000] $24 : 00000000 801abfd4
[ 475.310000] $28 : 82cc2000 82cc3d58 0053c3c4 801c7eac
[ 475.310000] Hi : 00000007
[ 475.310000] Lo : 00000004
[ 475.310000] epc : 801cdcf0 ar8216_remove+0x1c/0x94
[ 475.310000] Tainted: G O
[ 475.310000] ra : 801c7eac phy_remove+0x4c/0x6c
[ 475.310000] Status: 1000cc03 KERNEL EXL IE
[ 475.310000] Cause : 00800008
[ 475.310000] BadVA : 000000f0
[ 475.310000] PrId : 00019750 (MIPS 74Kc)
[ 475.310000] Modules linked in: ath79_wdt ledtrig_usbdev ledtrig_netdev ag71xx(-) nf_nat_irc nf_nat_ftp nf_conntrack_irc nf_conntrack_ft
p ipt_MASQUERADE iptable_nat xt_nat nf_nat_ipv4 nf_nat pppoext_conntrack xt_CT iptable_raw xt_state nf_conntrack_ipv4 nf_defrag_ipv4 nf_co
nntrack ehci_hcd pppox ipt_REJECT xt_TCPMSS xt_LOG xt_comment xt_multiport xt_mac xt_limit iptable_mangle iptable_filter ip_tables xt_tcpu
dp x_tables ppp_async ppp_generic slhc ath9k(O) ath9k_common(O) ath9k_hw(O) ath(O) mac80211(O) usbcore usb_common nls_base crc_ccitt cfg80
211(O) compat(O) arc4 crypto_blkcipher aead ledtrig_timer ledtrig_default_on leds_gpio gpio_button_hotplug(O)
[ 475.310000] Process rmmod (pid: 1160, threadinfo=82cc2000, task=83969920, tls=7747c440)
[ 475.310000] Stack : 828dde08 802f5004 802f4680 00000001 828ddf70 801c7eac 802f4680 801ad6d8
82902940 00000000 828dde08 802f5004 802f4680 801ad770 00000002 80269d94
00000000 00000001 00000080 828dde08 828dde3c 801ad7fc 82902940 00000000
83859100 00000000 8384dd2c 8384dd2c 828dde08 801ad230 82902800 00000000
00000000 001a0041 828dde08 828dde08 802e80e8 801aac44 00000080 00460000
...
[ 475.310000] Call Trace:
[ 475.310000] [<801cdcf0>] ar8216_remove+0x1c/0x94
[ 475.310000] [<801c7eac>] phy_remove+0x4c/0x6c
[ 475.310000] [<801ad770>] __device_release_driver+0x6c/0xd0
[ 475.310000] [<801ad7fc>] device_release_driver+0x28/0x40
[ 475.310000] [<801ad230>] bus_remove_device+0xd8/0x10c
[ 475.310000] [<801aac44>] device_del+0x110/0x170
[ 475.310000] [<801aacb8>] device_unregister+0x14/0x28
[ 475.310000] [<801c92b0>] mdiobus_unregister+0x4c/0x70
[ 475.310000] [<82913060>] ag71xx_remove_ar8216_header+0xdc/0x5a8 [ag71xx]
[ 475.310000]
[ 475.310000]
Code: 1200001c 8c82017c ac800128 <8c4500f0> 3c03ffdf 3463ffff 00a31824 ac4300f0 ac4000e0
Add a detach callback and disable packet mangling in
that to fix the problem.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35511
12 years ago
fe61fc2d7d
generic: add detach callback to struct phy_driver
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35510
12 years ago
395d0bdc1f
generic: ar8216: clear driver specific data pointer in phy_device
...
This is needed to avoid a NULL pointer dereference:
[ 19.525270] Unable to handle kernel paging request for data at address 0x00000018
[ 19.532750] Faulting instruction address: 0xc016e104
[ 19.537714] Oops: Kernel access of bad area, sig: 11 [#1 ]
[ 19.543102] P1010 RDB
[ 19.545365] Modules linked in: booke_wdt nf_nat_irc nf_nat_ftp nf_conntrack_irc nf_conntrack_ftp ipt_MASQUERADE iptable_nat xt_nat d
[ 19.590725] NIP: c016e104 LR: c0171490 CTR: 00000000
[ 19.595681] REGS: c4bc3c10 TRAP: 0300 Tainted: G W O (3.7.6)
[ 19.602284] MSR: 00029000 <CE,EE,ME> CR: 82002022 XER: 20000000
[ 19.608381] DEAR: 00000018, ESR: 00000000
[ 19.612382] TASK = c4cd9c80[2070] 'ifconfig' THREAD: c4bc2000
GPR00: 00000001 c4bc3cc0 c4cd9c80 00000000 c7811000 00000000 00000000 0000e8ec
GPR08: 0000e8eb 00000000 00029000 00000001 00000000 100801f8 1005c51c 1005c514
GPR16: 1005c468 1005c54c 1005c258 1005c530 10060000 00000000 c7811000 ffff8914
GPR24: c7815030 c793e400 10063adb 00000000 c7811000 c045594c c78ca600 c7815000
[ 19.646352] NIP [c016e104] register_switch+0x98/0x2d0
[ 19.651397] LR [c0171490] ar8216_config_init+0x2d8/0x3f4
[ 19.656697] Call Trace:
[ 19.659138] [c4bc3cc0] [c0170490] ar8216_mii_read+0x64/0xc4 (unreliable)
[ 19.665835] [c4bc3d00] [c0171490] ar8216_config_init+0x2d8/0x3f4
[ 19.671835] [c4bc3d20] [c016cf8c] phy_init_hw+0x50/0x6c
[ 19.677053] [c4bc3d30] [c016d078] phy_attach_direct+0xd0/0xf8
[ 19.682793] [c4bc3d50] [c016d154] phy_connect_direct+0x24/0x68
[ 19.688621] [c4bc3d70] [c0183b70] of_phy_connect+0x48/0x6c
[ 19.694102] [c4bc3d90] [c0175aac] gfar_enet_open+0x254/0x3d8
[ 19.699755] [c4bc3db0] [c019acc4] __dev_open+0xc0/0x120
[ 19.704975] [c4bc3dd0] [c019af98] __dev_change_flags+0xd4/0x15c
[ 19.710888] [c4bc3df0] [c019b0d4] dev_change_flags+0x1c/0x60
[ 19.716544] [c4bc3e10] [c01ebb94] devinet_ioctl+0x290/0x690
[ 19.722111] [c4bc3e70] [c01ec8d4] inet_ioctl+0x88/0xbc
[ 19.727245] [c4bc3e80] [c0186b98] sock_ioctl+0x258/0x294
[ 19.732551] [c4bc3ea0] [c009c00c] do_vfs_ioctl+0x6a4/0x728
[ 19.738031] [c4bc3f10] [c009c0d4] sys_ioctl+0x44/0x70
[ 19.743077] [c4bc3f40] [c000c74c] ret_from_syscall+0x0/0x3c
[ 19.748646] --- Exception: c01 at 0x48091b34
[ 19.748646] LR = 0x480e4b64
[ 19.756033] Instruction dump:
[ 19.758991] 2f830000 907f0050 3860fff4 419e021c 837f0000 38000000 901f0038 901f0040
[ 19.766744] 901f003c 7f600034 5400d97e 0f000000 <801b0018> 2f800000 40be0010 801b001c
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35497
12 years ago
2e7f38c243
generic: ar8216: unregister switch on error path
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35496
12 years ago
0e9365b346
kernel: generic: update the ehci overcurrent patch to upstream submission
...
Adds support for setting this in the generic platform driver's platform_data.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 35480
12 years ago
e0fe5596f8
kernel: generic: add back the patch exporting bcm63xx tag header
...
It went missing when adding linux 3.7 support.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 35479
12 years ago
34ad8f4e75
kernel: generic: update to 3.8-rc6
...
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 35478
12 years ago
08ff976720
kernel: update linux 3.7 to 3.7.6
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35476
12 years ago
4c223d7d4f
generic: convert crypto-ocf from kernel_thread to kthread
...
recent kernels have finally stopped exporting kernel_thread, since a
deprecation circa 2006. This patch attempts to convert to the newer
kernel kthread API, particularly in random.c
[juhosg: remove randomproc variable, it is not required after the patch]
Signed-off-by: Russell Senior <russell@personaltelco.net>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35456
12 years ago
bbfd8cbf94
linux/3.7: add missing config symbols
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35450
12 years ago
668e529220
generic: fix gc_sections patch
...
Due to the patch, essential '.data..*' sections are merged
into the '.data' section:
--- vmlinux.good.sect 2013-02-01 23:49:16.000000000 +0100
+++ vmlinux.bad.sect 2013-02-01 23:49:02.000000000 +0100
@@ -1,5 +1,5 @@
-vmlinux.good: file format elf32-powerpc
+vmlinux.bad: file format elf32-powerpc
Sections:
Idx Name Size VMA LMA File off Algn
@@ -53,43 +53,35 @@
CONTENTS, ALLOC, LOAD, READONLY, DATA
24 .machine.desc 00000460 c04e1000 004e1000 004f1000 2**2
CONTENTS, ALLOC, LOAD, DATA
- 25 .data 0000f6a0 c04e2000 004e2000 004f2000 2**12
+ 25 .data 0001635c c04e2000 004e2000 004f2000 2**12
CONTENTS, ALLOC, LOAD, DATA
- 26 .data..init_task 00002000 c04f2000 004f2000 00502000 2**3
- CONTENTS, ALLOC, LOAD, DATA
- 27 .data..page_aligned 00002000 c04f4000 004f4000 00504000 2**12
- CONTENTS, ALLOC, LOAD, DATA
- 28 .data..cacheline_aligned 00000c00 c04f6000 004f6000 00506000
2**5
- CONTENTS, ALLOC, LOAD, DATA
- 29 .data..read_mostly 000015e0 c04f6c00 004f6c00 00506c00 2**3
- CONTENTS, ALLOC, LOAD, DATA
- 30 .sbss 000002e0 c04f9000 004f9000 005081e0 2**3
+ 26 .sbss 000002e0 c04fa000 004fa000 0050835c 2**3
<...>
This causes boot hang on powerpc. Modify the patch to
ensure that the kernel specific '.data..*' sections
remain separate.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35447
12 years ago
a2529eab2b
linux/3.6: add missing config symbols
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35441
12 years ago
fb936218a1
linux/3.6: refresh patches
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35440
12 years ago
Gabor Juhos