39ba5482d0
imx6: enable fixed voltage reulator
...
Fixed voltage regulator support is required by several drivers that have
regulator consumers, such as the sgtl5000 audio codec used on many i.MX6
boards.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
SVN-Revision: 38426
11 years ago
0a0ac79cb7
imx6: add support for gw52xx
...
The Gateworks GW51xx family of products is based on the Freescale
i.MX6DL SoC and offers a small form-factor with peripherals such as:
* i.MX6DL 512MB DDR3
* 256MB NAND FLASH
* 2x PCIe
* 1x USB EHCI (to PCIe socket2)
* 1x USB OTG (to front panel or PCIe socket1)
* 1x uSD
* LVDS
* HDMI AudioVideo out
* Analog Video in
* Digital IO
* Gateworks System Controller
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
SVN-Revision: 38425
11 years ago
365ed4d22f
imx6: dts: update ventana dts
...
- fix spi chipselect for GW5400-A
- fix audmux pinctrl for GW54xx
- remove unused alias nodes
- remove unused regulator nodes (will be adding pmic nodes next)
- remove duplicate eeprom entries
- add regulator definitions
- fix sgtl5000 regulator reference
- add egalax touchscreen controller interrupt
- fix gw5400-a audmux pinctrl
- fix usb ehci alias
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
SVN-Revision: 38424
11 years ago
662e3943ff
imx6: split out ventana init patch from devicetree
...
SVN-Revision: 38423
11 years ago
adb70acecb
imx6: add pfuze100 regulator support
...
- backport driver
- apply patch to allow misprogrammed parts
- enable driver in kernel
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
SVN-Revision: 38422
11 years ago
88590e4cb7
imx6: minor (cosmetic) changes in uci-defaults
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38421
11 years ago
3365d89817
imx6: add back bootargs
...
They make our life easier when testing ramdisk images.
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38420
11 years ago
9a97c56535
ralink: fix default vlan mapping for MT7620a_MT7610e
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38418
11 years ago
21fe2b7c5b
mpc85xx: revert the napi polling code to the one from an older kernel version to fix stability issues ( #14020 )
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38409
11 years ago
d75f9ca58a
imx23: build DCP crypto co-processor support by default
...
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 38408
11 years ago
9e2b69139b
mxs: add support for I2SE Duckbill devices
...
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 38407
11 years ago
bea9d64f4a
mxs: improve image generation support
...
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 38406
11 years ago
fed363b6be
mxs: enable device tree support in /proc
...
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 38405
11 years ago
ad7564142d
kirkwood: drop 3.3.x kernel version
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38404
11 years ago
73246d2f64
kirkwood: upgrade to 3.10.15
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38402
11 years ago
07043a853a
imx23: rename imx23 to mxs for upcoming imx23/28 support
...
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 38394
11 years ago
f023c09699
brcm47xx: activate ARP daemon support
...
This just add some bytes to the kernel and is activated on other targets.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38388
11 years ago
dd3f451d55
cobalt: do not build userland with support for mips1
...
Without specifying -march gcc uses -march=mips1 by default, but that
causes problems when compiling openssl. Use -march=r5000 instead to
compile a userland optimized for the CPU used on this device.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38386
11 years ago
81e2f00367
kernel: update kernel to 3.10.15
...
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38384
11 years ago
551a250e58
brcm47xx: fix detection of some boards
...
This adds some more boards.
This fixes parts of #14316 and #14133 .
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38383
11 years ago
aac26bfbca
ar71xx: Fix sysupgrade when upgrading to images with small rootfs partition
...
Signed-off-by: Vasilis Tsiligiannis <acinonyx@openwrt.gr>
SVN-Revision: 38382
11 years ago
8c2f571ddd
kirkwood: enable appended dtb (3.10.x)
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38379
11 years ago
c808a4a7ef
ubifs: enable building modular images
...
Now it is possible to build ubi/ubifs images for only selected boards inside
single target.
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38375
11 years ago
06382c5b15
ar7: drop linux 3.9 support
...
Linux 3.9 is EOL since quite a while, no need to keep support for it.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 38370
11 years ago
5ba5efcd9b
ar7: add support for linux 3.10 and switch to it
...
Run tested on WAG354Gv2.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 38369
11 years ago
c08dc5bffa
mvswitch: fix compilation for linux 3.10
...
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 38368
11 years ago
5f272ca813
make the generated images actually flashable on the Unifi devices.
...
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 38364
11 years ago
0c2ce3f37a
x86: kvm: disable squashfs and jffs2 images by default
...
SVN-Revision: 38355
11 years ago
a05d20a60f
kernel: add default config for ARM_ERRATA symbols for kernel 3.3
...
Commit r37470 did not add a default conig for the ARM_ERRATA symbols for kernel 3.3.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38352
11 years ago
b93e5498ae
ralink: fixes mpr a1/a2 network setup
...
Signed-off-by: Suschman <suschman@gmx.net>
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38348
11 years ago
e382d2c7e6
ralink: add support for the mt7530 eval board
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38345
11 years ago
697bb191b0
ralink: add missing header file to mt7530 driver
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38344
11 years ago
654dfb1784
lantiq: fix up diag.sh
...
init no longer exists as a parameter
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38342
11 years ago
715b62ebad
lantiq: experia v8 fixes
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38328
11 years ago
81fb43d2f1
lantiq: fix fritz3370 dts file
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38327
11 years ago
ae225124c6
lantiq: fix fritz image generation
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38326
11 years ago
1398a5d849
lantiq: fix eva partition split for squashfs
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38325
11 years ago
c903de043e
ralink: fix asiarf image generation
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38324
11 years ago
ddcb800018
ralink: split mt7530 driver out of the gsw driver
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38323
11 years ago
c077698e38
ralink: build recovery images for dcs930 ip cam
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38322
11 years ago
420c62205b
ralink: DIR610A1 Fix remaining issues
...
This patch fixes:
- Ethernet and Wireless LEDs
- Wireless MAC Address
- Remove whitespaces from dts file
Signed-off-by: Flavio Silveira <fggs@terra.com.br>
SVN-Revision: 38321
11 years ago
5eacfc1c60
ralink: MT7620 eval board pinmux fixes
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38320
11 years ago
cc58dd26d3
ralink: make cevt systick selectable via kconfig
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38319
11 years ago
baf9d53792
ralink: fix mt7620a pinmux
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38318
11 years ago
64c2bc256c
brcm47xx: Cocci spatch "noderef"
...
sizeof when applied to a pointer typed expression gives the size of the
pointer.
Found by coccinelle spatch "misc/noderef.cocci"
Signed-off-by: Thomas Meyer <thomas@m3y3r.de>
SVN-Revision: 38312
11 years ago
2402f8a9ee
brcm47xx: move clock detection patches
...
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38311
11 years ago
4c193a30ce
brcm47xx: move and rename nvram gpio patch
...
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38310
11 years ago
b201818044
brcm47xx: update early printk patches
...
Early printk was disabled because it caused hangs on some devices, the
old patches were using the CFE console now we use the normal serial
console, it is at a constant address.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38309
11 years ago
ebf0778721
brcm47xx: update board detection patches
...
Add patches like they are currently in the mainline mips tree and add
some more pending patches for board detection.
* Now the board name is shown under machine in /proc/cpuinfo.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38308
11 years ago
53a2c19c69
kernel: b53: add switch name into printk when it fails.
...
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38307
11 years ago
Luka Perkov