384ac9cdf7
uclient: update to the latest version, fixes a crash in processing redirect/disconnect after headers
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45446
10 years ago
3edb55143d
bcm53xx: add (disabled) support for upgrading kernel during sysupgrade
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45445
10 years ago
8b1b857948
otrx: support for creating simple TRX files
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45444
10 years ago
3cb8bf44e6
otrx: change command line API to start with a mode
...
This will allow adding more modes without options conflict.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45443
10 years ago
9d982afe5e
rpcd: update to latest git HEAD
...
adds support for reading md5 sums of files
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 45442
10 years ago
da2742db3b
ustream-ssl: update to latest git HEAD
...
fixes long writes when using polarssl
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 45441
10 years ago
88593747cc
fstools: update to latest git HEAD
...
fixes issues with semi-initialized overlay partitions during firstboot
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 45440
10 years ago
911cf6da60
ar71xx: Enable AT803X_PHY to set special flags
...
Open-Mesh OM5P-AN use a AT8035 (F1E) behind one of the ethernet ports. This PHY
requires special flags to work correctly. Otherwise massive packet loss happens
with active POE or when switching the link speed from gigabit ethernet to fast
ethernet. The generic PHY doesn't have support to change these settings.
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
SVN-Revision: 45439
10 years ago
efbdc168ff
ar71xx: fix ethernet packet loss issues on OM5P-AN
...
The OM5P-AN boards are suffering from ethernet packet loss when booting with
some active POE setups or when switching to Fast Ethernet when previously
booted with Gigabit ethernet attached.
The cause of the problem is that the AR8035 PHYs requires special register
settings to work reliably on these boards. Enable the RGMII TX, RX delays and
disable SmartEE functionality of the AR8035 PHYs. Also enable the RXD and RDV
delay in the ETH_CFG register to fix the issue.
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
SVN-Revision: 45438
10 years ago
cc9a392e49
opkg: drop md5 in favour of sha256
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 45437
10 years ago
0bd2710512
otrx: use %zd to fix printf format warnings
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45436
10 years ago
6fad3d5524
odhcpd: fix accidental logic inversion
...
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 45435
10 years ago
1ea8e3caca
build: replace the deprecated find argument -perm +0100 with /0100 ( #19480 )
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45434
10 years ago
834e60c4f1
otrx: check TRX length read from header to avoid Segmentation fault
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45433
10 years ago
b5073ca2c8
mac80211: merge a number of upstream driver fixes/improvements
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45432
10 years ago
5c9c670616
kernel: update bgmac patches to the latest version submitted
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45431
10 years ago
cd4fd05648
otrx: include byteswap.h to fix compilation with musl
...
Fixes #19470
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45430
10 years ago
56573fdb0d
odhcp6c: fix some issue discovered by scan-build
...
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 45429
10 years ago
7e5bf40cac
odhcpd: avoid illegal memory access in some corner cases
...
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 45428
10 years ago
c99c9f875e
build: set CCACHE_DIR for host builds
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45427
10 years ago
923bef1678
bcm53xx: refresh kernel patches
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45426
10 years ago
bdb6c313de
qos-scripts: remove layer7 support
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45425
10 years ago
4e4060138a
iptables: remove layer7 support
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45424
10 years ago
d0ba3bb1e2
kernel: finally remove layer7 filter support
...
it has been non-functional for years and caused numerous memleaks and
crashes for people that tried to enable it.
it has no maintained upstream source, and it does not look like it's
going to be fixed any time soon
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45423
10 years ago
87f854059a
kernel: fix more bgmac dma init/cleanup issues
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45422
10 years ago
232c61742e
mvebu: copy the initramfs files to the bin dir
...
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 45421
10 years ago
1bf8e555bb
kernel: sync bgmac changes with latest upstream submission
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45420
10 years ago
24e9f52106
bcm53xx: add support for the Buffalo WXR-1900DHP
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45419
10 years ago
1e48a48915
bcm53xx: fix GPIO pins > 16
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45418
10 years ago
6bc743ef6f
kernel: add bgmac fixes for bcm53xx (fix ethernet bringup on a bcm4709 based device)
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45417
10 years ago
1f70f452cc
bcm53xx: add missing l2 cache controller AUXCTL bit
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45416
10 years ago
8c684f42e5
mvebu: add support for the in-CPU RTC on the Armada 38x
...
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 45415
10 years ago
c9e6c7c836
mvebu: add comments to image generation
...
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 45414
10 years ago
e3bd4f0969
mvebu: stop legacy image generation
...
If you can't find the firmware for you board, send proper patches.
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 45413
10 years ago
96c793f529
mvebu: generate a single firmware for the 385-db-ap
...
This has been done without having a board, but should work.
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 45412
10 years ago
4da8f96754
mvebu: reflect Armada 38x support in the name
...
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 45411
10 years ago
3633523ba6
dnsmasq: fix dnssec timestamp logic, backport crashfix
...
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 45410
10 years ago
33b93243ec
wpan: remove duplicate DEPENDS
...
Signed-off-by: Varka Bhadram <varkab@cdac.in>
SVN-Revision: 45409
10 years ago
d24388da44
bcm53xx: add a comment about the gpio base patch
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45408
10 years ago
afafbc0d74
kernel: bgmac: add more DMA related fixes
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45407
10 years ago
09722d0bdc
ppc40x: upgrade to 3.18
...
left "broken" as I'm not sure if my only board is to blame.. testers welcomed
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 45406
10 years ago
e55532b7af
orion: upgrade to 3.18 (compile tested only)
...
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 45405
10 years ago
b0b95e0dd7
fstools: reject relative mount points
...
To prevent future confusion around '/overlay' vs. 'overlay' simply reject
relative path specifications as mount points since such paths result in
undefined behaviour anyway.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 45404
10 years ago
77c75e6fa3
bcm53xx: try to handle Netgear R8000 VLANs config
...
It seems to have few ports connected to CPU (only for CPU sending data?)
as part of "SMP dual core 3 GMAC setup" feature.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45403
10 years ago
06ac2f5c74
b53: improve overriding CPU port state on BCM5301X
...
On BCM5301X there are two different cases to handle: CPU port 8 vs. any
other one. Support for CPU port 8 was already partially implemented but
it lacked setting some extra bit for 2G speed. It also will need to be
extended to implement "SMP dual core 3 GMAC setup". That's the reason
for handling it in separated code block.
This patch also adds overriding CPU port state for port other than 8. It
requires using recently defined GMII_PORT registers.
It was tested for regressions on BCM53011 revs 2 & 3. It was also
confirmed to fix switch on some internal Broadcom board.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Acked-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 45402
10 years ago
ceb7321e13
mvebu: refresh patches
...
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 45401
10 years ago
b0ad24f0d5
mvebu: migrate mamba support to the upstreamed code
...
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 45400
10 years ago
2dbe131a62
bcm53xx: fix bcma gpio chip base
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45399
10 years ago
808fb7a0bd
kernel: add missing memory barrier to bgmac
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45398
10 years ago
354f06b84c
modules: add missing imx6 depenedency to dwc2
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 45397
10 years ago
Felix Fietkau