d1a015f8ca
brcm63xx: DVA-G3810BN/TL: Fix the WAN ethernet port
...
The WAN port has the wrong configuration in the kernel for the DVA-G3810BN/TL
The WAN port uses the internal phy, but it isn't enabled at the kernel board data.
Fix it.
Signed-off-by: Daniel Gonzalez Cabanelas <dgcbueu@gmail.com>
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
6 years ago
a01568fbd3
brcm63xx: remove broken DSP platform device code
...
There is no driver and it crashes the kernel, so just remove it.
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
6 years ago
1ba38f6100
brcm63xx: add kernel 4.14 support
...
Add support for kernel 4.14. Increases compressed kernel size by ~64k
compared to 4.9.
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
7 years ago
aba4e29ead
brcm63xx: register serial through device tree
...
Register serial consoles through device tree instead of through board
data.
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
7 years ago
b43c190079
brcm63xx: probe SPI connected switches through DT
...
Now that we can configure the switches through DT, do so.
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
8 years ago
1e4ee5a318
brcm63xx: CPVA502+: add SPROM wifi
...
Add SPROM wifi to the kernel board data.
After this fix, the wifi won't work anyway due the lack
of RAM memory (16 MB). It will throw a kernel panic
when loading the b43 drivers.
Signed-off-by: Daniel Gonzalez Cabanelas <dgcbueu@gmail.com>
8 years ago
0127c480bb
brcm63xx: Neufbox 6: fix switch by probing through DT
...
Probe the switch through DT instead of a platform device. This fixes
probe, as GPIO offsets are now properly accounted for.
Fixes the following issue:
[ 0.802953] 8021q: 802.1Q VLAN Support v1.8
[ 0.810518] rtl8366_smi: gpio_request failed for 18, err=-517
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
8 years ago
a529b41cff
brcm63xx: set DSL-274XB-F1 ath9k LED as active high
...
D-Link DSL-274XB rev F1 has an active high ath9k LED.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
9 years ago
85a0a908e3
brcm63xx: set HG556a A/B ath9k LED as active high
...
Huawei HG556a has an active high ath9k LED.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
9 years ago
e395433178
brcm63xx: add linux 4.4 support
...
Only netboot tested. Flash at your own risk.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 47702
9 years ago
5ebd02e8d5
brcm63xx: remove legacy led/button related patches
...
We register all gpio buttons and leds through DT, so no need to keep
fixes/additions for the platform data based bay.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 46753
9 years ago
bd398e1765
brcm63xx: add kernel 4.1 support
...
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 46113
10 years ago
5e8eedb897
brcm63xx: add missing bcm96329bhr profile and dts
...
Hopefully the last missing board.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 45557
10 years ago
c1ea714d43
brcm63xx: BCM963268BU_P300 reference board fixes
...
- Fix profile name.
- Rremove whitespace on board patch.
- Refresh patches.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 45499
10 years ago
f77b446051
brcm63xx: move bcm6318 reference boards to DT
...
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 45167
10 years ago
f644c1581a
brcm63xx: move VG50 to DT
...
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 45166
10 years ago
f973580488
brcm63xx: move V2110 to DT
...
Also readd image generation which was accidentally dropped in r43364.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 45165
10 years ago
10cdfd04e6
brcm63xx: move RTA770(B)W to dts
...
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 44992
10 years ago
0e4c1ba284
brcm63xx: move MAGIC to dts
...
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 44991
10 years ago
582dfc52f5
brcm63xx: move CPVA502+ to dts
...
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 44990
10 years ago
46b4d4d1d5
brcm63xx: move dg834g v4 to dts
...
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 44989
10 years ago
30a579c674
brcm63xx: move dsl-2640u to dts
...
Also build image again(?).
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 44988
10 years ago
16ea19053a
brcm63xx: move bcm963268bu_p300 to dts
...
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 44987
10 years ago
b82cb155fc
brcm63xx: move buttons and leds to dts files
...
Register buttons and leds through DT for all available dts,
and remove them from the board files.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
[jogo: remove leds/buttons from board files
fix wrong led polarities for dsl-274xb-c2, cpva642, p870hw
comment out spi-gpio and associated leds]
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 44566
10 years ago
1efb7398e1
brcm63xx: convert BTV2500V to dts
...
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 44564
10 years ago
90c15beee6
brcm63xx: convert RTA1320 to dts
...
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 44563
10 years ago
bc4dd8e119
brcm63xx: refresh patches
...
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 43576
10 years ago
387fd3ca26
brcm63xx: add kernel 3.18 support
...
Add 3.18 support based on 3.18-rc6. Only netboot tested.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 43461
10 years ago
bb312899f6
brcm63xx: refresh patches
...
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 43453
10 years ago
fb2a44df50
brcm63xx: refresh patches
...
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 43363
10 years ago
2bab3e2796
brcm63xx: move board compatible strings into a table
...
Move compatible strings from board structs into separate table. This
allows for several board compatibles to match to the same board in case
e.g. only the flash size / partitions differ.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 43341
10 years ago
2fa8a656a6
brcm63xx: update spw500v sprom to values from gpl tarball
...
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 42740
10 years ago
57214b00ae
brcm63xx: Add DT support for 96368MVWG
...
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 42738
10 years ago
477826ef31
brcm63xx: Add DT support for 96368MVNgr
...
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 42737
10 years ago
a950e2fce8
brcm63xx: Add DT support for 963281TAN
...
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 42727
10 years ago
b339304425
brcm63xx: Add DT support for HG553
...
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
[jogo: fix linux partition length]
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 42247
10 years ago
a180c80f23
brcm63xx: Add DT support for A4001N1
...
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 42244
10 years ago
83651bad85
brcm63xx: Add DT support for WAP-5813n
...
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
[jogo: make linux partition writable]
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 42243
10 years ago
2936cacdfc
brcm63xx: Add DT support for AR-5387un
...
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 42240
10 years ago
b97aa0b4fd
brcm63xx: Add DT support for AR-5381u
...
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 42239
10 years ago
1891b08f00
brcm63xx: Add DT support for CT-6373
...
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
[jogo: make linux partition writable]
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 42238
10 years ago
e490cc7e14
brcm63xx: Add DT support for CT-5365
...
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
[jogo: make linux partition writable]
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 42237
10 years ago
770ba9d40f
brcm63xx: enable fallback sprom for Speedport W500 V
...
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 42211
10 years ago
29e4d82dbb
brcm63xx: fix HG556a boards and remove fallback board
...
This changes board info to match the Wiki
http://wiki.openwrt.org/toh/huawei/hg556a , removes the no longer needed
fallback board and fixes HG556 Ralink eeprom extraction.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
[jogo: rename partitions instead]
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 42206
10 years ago
43029544e2
brcm63xx: remove now obsolete board fixup code
...
Now that we migrated all users to dtb based detection, we can drop the
board fixup code.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 42129
10 years ago
74ec41ef59
brcm63xx: use dtb board detection for neufbox 4
...
This splits up neufbox 4 for now into two images, one for each OEM.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 42128
10 years ago
862f7fccb0
brcm63xx: use dtb board detection for NB6
...
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 42127
10 years ago
52b0935efe
brcm63xx: use dtb board detection for HW556
...
This requires individual images for each board version for now.
Linux partition was shrunk to ensure writing thewrong image won't
erase wifi calibration data.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 42126
10 years ago
0aa242fe20
brcm63xx: replace CFEFIXUP usage with dtb based detection
...
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 42125
10 years ago
de8e3f2f86
brcm63xx: add and enable support for loading an appended dtb
...
Allow appending a dtb blob to the binary and use it for identifying the
board. Fall back to nvram based identification in case of no dtb passed.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 42119
10 years ago
Daniel Gonzalez Cabanelas