3b4fced67d
bcm63xx: add support for linux 3.7
...
Based on 3.7.6.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 35481
12 years ago
a15e1a950d
bcm63xx: refresh 3.6 patches
...
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 35477
12 years ago
8411e5c06e
bcm63xx: switch to b53 and swconfig
...
Switch to using the B53 switch driver where appropriate.
Use a non-tagged default config where it isn't confirmed to be
working.
Remove the switch configuration in preinit as the switch will now
be configured by the driver to use port isolation to prevent leakage
between lan and wan.
While at it, also provide a switch config for Neufbox 6.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 35307
12 years ago
60e0e0d6e6
bcm63xx: Add a fixup for rt2x00 devices.
...
This patch adds support for defining rt2x00 eeprom data.
This eeprom data can be extracted from flash or loaded directly from a firmware file.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 34322
12 years ago
8d69af7c9f
add preliminary support for 3.6 kernel
...
SVN-Revision: 33936
12 years ago
9b91c62917
nb4: fix support, add support for SVC and CLIP BTN
...
Signed-off-by: Miguel GAIO <miguel.gaio@efixo.com>
SVN-Revision: 33156
12 years ago
c69a2cdfbb
fix leds naming for all bcm63xx boards
...
SVN-Revision: 32086
13 years ago
9a61b249c5
fix board patches so that new boards are withing appropriate ifdef
...
Some new board definitions were added within the #ifdef CONFIG_CPU_6338
section while some other were added within #ifdef CONFIG_CPU_6345, fix this
SVN-Revision: 32060
13 years ago
e34018cc9e
bcm63xx: add support for the HSSPI controller
...
Add support for the HSSPI controller found on bcm6328 and SPI attached
flash.
SVN-Revision: 31879
13 years ago
7dbb132c88
bcm63xx: add flash type detection
...
SVN-Revision: 31877
13 years ago
5d9b44d110
use a define for the poll and debounce interval
...
SVN-Revision: 31550
13 years ago
44d546290a
bcm63xx: reorder patches
...
Reorder patches for a clearer distinction between the purposes of
the different patches.
SVN-Revision: 31127
13 years ago
07486c4d96
remove udc patch since it is unused
...
SVN-Revision: 30920
13 years ago
778e5d4fa5
brcm63xx: add support for linux 3.3
...
SVN-Revision: 30027
13 years ago
3883e71097
brcm63xx: add support for linux 3.2
...
SVN-Revision: 29731
13 years ago
c560444a58
kernel: update linux 3.1 to 3.1.9
...
SVN-Revision: 29726
13 years ago
6b5f483efa
bcm63xx: add support for linux 3.1-rc1
...
SVN-Revision: 27941
13 years ago
00ad56b73e
move board_HW553 inside the ifdef ..BCM6358 .. endif block
...
SVN-Revision: 27484
14 years ago
7c3bbe150a
hw553: fix missing has_uart0 in board definition ( #9533 )
...
SVN-Revision: 27448
14 years ago
016e8dee34
bcm63xx: Add support for 2.6.39
...
Add support for Kernel 2.6.39. Boots fine on a BCM6358.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 27019
14 years ago
762885081a
renumber patches accordingly
...
SVN-Revision: 27013
14 years ago
031ea08ef0
refresh patches
...
SVN-Revision: 26957
14 years ago
94a22b91fc
add support for 2.6.37, patches from KanjiMonster
...
SVN-Revision: 25629
14 years ago
8cc16aa14e
add support for HW553 bcm6358-based boards ( #8844 )
...
SVN-Revision: 25590
14 years ago
Jonas Gorski