ramips: rename TP-Link Archer C20 to TP-Link Archer C20 v1

This changes device name from "TP-Link Archer C20" to "TP-Link Archer C20 v1"
because of TPLINK released new TP-Link Archer C20 v4. Additionally
migration to the generic board detection has been made.

Signed-off-by: Maxim Anisimov <maxim.anisimov.ua@gmail.com>

target/linux/ramips/base-files/etc/board.d/01_leds

@@ -91,12 +91,6 @@ c108)
 	ucidef_set_led_netdev "lan" "lan" "$boardname:green:lan" "eth0"
 	ucidef_set_led_netdev "modem" "modem" "$boardname:green:modem" "wwan0"
 	;;
-c20)
-	ucidef_set_led_switch "lan" "lan" "$boardname:blue:lan" "switch0" "0x1e"
-	ucidef_set_led_switch "wan" "wan" "$boardname:blue:wan" "switch0" "0x01"
-	set_usb_led "$boardname:blue:usb"
-	ucidef_set_led_netdev "wlan2g" "wlan2g" "$boardname:blue:wlan2g" "wlan0"
-	;;
 c20i)
 	ucidef_set_led_switch "lan" "lan" "$boardname:blue:lan" "switch0" "0x1e"
 	ucidef_set_led_switch "wan" "wan" "$boardname:blue:wan" "switch0" "0x01"
@@ -388,6 +382,12 @@ tl-wr841n-v13)
 	ucidef_set_led_switch "lan4" "lan4" "$boardname:green:lan4" "switch0" "0x10"
 	ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x01"
 	;;
+tplink,c20-v1)
+	ucidef_set_led_switch "lan" "lan" "$boardname:blue:lan" "switch0" "0x1e"
+	ucidef_set_led_switch "wan" "wan" "$boardname:blue:wan" "switch0" "0x01"
+	set_usb_led "$boardname:blue:usb"
+	ucidef_set_led_netdev "wlan2g" "wlan2g" "$boardname:blue:wlan2g" "wlan0"
+	;;
 tplink,tl-mr3420-v5)
 	set_usb_led "$boardname:green:usb"
 	set_wifi_led "$boardname:green:wlan"

target/linux/ramips/base-files/etc/board.d/02_network

@@ -190,8 +190,8 @@ ramips_setup_interfaces()
 		ucidef_add_switch "switch0" \
 			"1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "6@eth0"
 		;;
-	c20|\
-	c50)
+	c50|\
+	tplink,c20-v1)
 		ucidef_add_switch "switch0" \
 			"1:lan:3" "2:lan:4" "3:lan:1" "4:lan:2" "0:wan" "6@eth0"
 		;;

target/linux/ramips/base-files/etc/diag.sh

@@ -124,7 +124,6 @@ get_status_led() {
 	w502u)
 		status_led="$boardname:blue:wps"
 		;;
-	c20|\
 	d240|\
 	dap-1350|\
 	na930|\
@@ -136,6 +135,7 @@ get_status_led() {
 	rt-n14u|\
 	rt-n15|\
 	rt-n56u|\
+	tplink,c20-v1|\
 	wl-330n|\
 	wl-330n3g|\
 	wli-tx4-ag300n|\

target/linux/ramips/base-files/lib/ramips.sh

@@ -85,9 +85,6 @@ ramips_board_detect() {
 	*"C108")
 		name="c108"
 		;;
-	*"C20")
-		name="c20"
-		;;
 	*"C20i")
 		name="c20i"
 		;;

target/linux/ramips/base-files/lib/upgrade/platform.sh

@@ -237,10 +237,10 @@ platform_check_image() {
 		}
 		return 0
 		;;
-	c20|\
 	c20i|\
 	c50|\
 	mr200|\
+	tplink,c20-v1|\
 	tplink,tl-mr3420-v5|\
 	tl-wr840n-v4|\
 	tl-wr840n-v5|\

target/linux/ramips/dts/ArcherC20v1.dts

@@ -6,8 +6,8 @@
 #include <dt-bindings/gpio/gpio.h>
 
 / {
-	compatible = "tplink,c20", "ralink,mt7620a-soc";
-	model = "TP-Link Archer C20";
+	compatible = "tplink,c20-v1", "ralink,mt7620a-soc";
+	model = "TP-Link Archer C20 v1";
 
 	chosen {
 		bootargs = "console=ttyS0,115200";
@@ -17,43 +17,43 @@
 		compatible = "gpio-leds";
 
 		lan {
-			label = "c20:blue:lan";
+			label = "c20-v1:blue:lan";
 			gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
 		};
 
 		power {
-			label = "c20:blue:power";
+			label = "c20-v1:blue:power";
 			gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
 			default-state = "keep";
 		};
 
 		usb {
-			label = "c20:blue:usb";
+			label = "c20-v1:blue:usb";
 			gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
 		};
 
 		wan {
-			label = "c20:blue:wan";
+			label = "c20-v1:blue:wan";
 			gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
 		};
 
 		wan_orange {
-			label = "c20:orange:wan";
+			label = "c20-v1:orange:wan";
 			gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
 		};
 
 		wlan5g {
-			label = "c20:blue:wlan5g";
+			label = "c20-v1:blue:wlan5g";
 			gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
 		};
 
 		wlan2g {
-			label = "c20:blue:wlan2g";
+			label = "c20-v1:blue:wlan2g";
 			gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
 		};
 
 		wps {
-			label = "c20:blue:wps";
+			label = "c20-v1:blue:wps";
 			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
 		};
 	};
@@ -74,7 +74,8 @@
 			label = "rfkill";
 			gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_RFKILL>;
-		};	};
+		};
+	};
 };
 
 &gpio1 {
@@ -178,7 +179,7 @@
 		mt76@0,0 {
 			reg = <0x0000 0 0 0 0>;
 			device_type = "pci";
-			mediatek,mtd-eeprom = <&radio 32768>;
+			mediatek,mtd-eeprom = <&radio 0x8000>;
 			ieee80211-freq-limit = <5000000 6000000>;
 			mtd-mac-address = <&rom 0xf100>;
 			mtd-mac-address-increment = <(-1)>;

target/linux/ramips/image/mt7620.mk

@@ -45,20 +45,6 @@ define Device/Archer
   IMAGE/sysupgrade.bin := tplink-v2-image -s -e | append-metadata
 endef
 
-define Device/ArcherC20
-  $(Device/Archer)
-  DTS := ArcherC20
-  SUPPORTED_DEVICES := c20
-  TPLINK_FLASHLAYOUT := 8Mmtk
-  TPLINK_HWID := 0xc2000001
-  TPLINK_HWREV := 0x44
-  TPLINK_HWREVADD := 0x1
-  IMAGES += factory.bin
-  DEVICE_TITLE := TP-Link ArcherC20
-  DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport
-endef
-TARGET_DEVICES += ArcherC20
-
 define Device/ArcherC20i
   $(Device/Archer)
   DTS := ArcherC20i
@@ -433,6 +419,20 @@ define Device/tiny-ac
 endef
 TARGET_DEVICES += tiny-ac
 
+define Device/tplink_c20-v1
+  $(Device/Archer)
+  DTS := ArcherC20v1
+  SUPPORTED_DEVICES := c20v1
+  TPLINK_FLASHLAYOUT := 8Mmtk
+  TPLINK_HWID := 0xc2000001
+  TPLINK_HWREV := 0x44
+  TPLINK_HWREVADD := 0x1
+  IMAGES += factory.bin
+  DEVICE_TITLE := TP-Link ArcherC20 v1
+  DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport
+endef
+TARGET_DEVICES += tplink_c20-v1
+
 define Device/vonets_var11n-300
   DTS := VAR11N-300
   IMAGE_SIZE := $(ralink_default_fw_size_4M)