|
|
|
@ -11,8 +11,8 @@ |
|
|
|
|
|
|
|
|
|
Index: linux-2.6.37/arch/arm/mach-omap1/board-nokia770.c
|
|
|
|
|
===================================================================
|
|
|
|
|
--- linux-2.6.37.orig/arch/arm/mach-omap1/board-nokia770.c 2011-01-27 14:17:04.376000007 +0100
|
|
|
|
|
+++ linux-2.6.37/arch/arm/mach-omap1/board-nokia770.c 2011-01-27 14:17:29.131000007 +0100
|
|
|
|
|
--- linux-2.6.37.orig/arch/arm/mach-omap1/board-nokia770.c 2011-01-05 01:50:19.000000000 +0100
|
|
|
|
|
+++ linux-2.6.37/arch/arm/mach-omap1/board-nokia770.c 2011-01-28 18:09:59.378233620 +0100
|
|
|
|
|
@@ -36,6 +36,7 @@
|
|
|
|
|
#include <plat/lcd_mipid.h>
|
|
|
|
|
#include <plat/mmc.h>
|
|
|
|
@ -47,8 +47,8 @@ Index: linux-2.6.37/arch/arm/mach-omap1/board-nokia770.c |
|
|
|
|
static void mipid_shutdown(struct mipid_platform_data *pdata)
|
|
|
|
|
Index: linux-2.6.37/arch/arm/mach-omap2/board-n8x0.c
|
|
|
|
|
===================================================================
|
|
|
|
|
--- linux-2.6.37.orig/arch/arm/mach-omap2/board-n8x0.c 2011-01-27 14:17:04.381000007 +0100
|
|
|
|
|
+++ linux-2.6.37/arch/arm/mach-omap2/board-n8x0.c 2011-01-27 14:17:29.132000007 +0100
|
|
|
|
|
--- linux-2.6.37.orig/arch/arm/mach-omap2/board-n8x0.c 2011-01-05 01:50:19.000000000 +0100
|
|
|
|
|
+++ linux-2.6.37/arch/arm/mach-omap2/board-n8x0.c 2011-01-28 18:13:25.864968462 +0100
|
|
|
|
|
@@ -18,9 +18,13 @@
|
|
|
|
|
#include <linux/io.h>
|
|
|
|
|
#include <linux/stddef.h>
|
|
|
|
@ -72,7 +72,7 @@ Index: linux-2.6.37/arch/arm/mach-omap2/board-n8x0.c |
|
|
|
|
|
|
|
|
|
#include "mux.h"
|
|
|
|
|
|
|
|
|
|
@@ -40,109 +46,154 @@
|
|
|
|
|
@@ -40,109 +46,162 @@
|
|
|
|
|
static int slot2_cover_open;
|
|
|
|
|
static struct device *mmc_device;
|
|
|
|
|
|
|
|
|
@ -81,43 +81,14 @@ Index: linux-2.6.37/arch/arm/mach-omap2/board-n8x0.c |
|
|
|
|
-#define TUSB6010_GPIO_INT 58
|
|
|
|
|
-#define TUSB6010_GPIO_ENABLE 0
|
|
|
|
|
-#define TUSB6010_DMACHAN 0x3f
|
|
|
|
|
-
|
|
|
|
|
-#if defined(CONFIG_USB_TUSB6010) || \
|
|
|
|
|
- defined(CONFIG_USB_TUSB6010_MODULE)
|
|
|
|
|
-/*
|
|
|
|
|
- * Enable or disable power to TUSB6010. When enabling, turn on 3.3 V and
|
|
|
|
|
- * 1.5 V voltage regulators of PM companion chip. Companion chip will then
|
|
|
|
|
- * provide then PGOOD signal to TUSB6010 which will release it from reset.
|
|
|
|
|
- */
|
|
|
|
|
-static int tusb_set_power(int state)
|
|
|
|
|
-{
|
|
|
|
|
- int i, retval = 0;
|
|
|
|
|
-
|
|
|
|
|
- if (state) {
|
|
|
|
|
- gpio_set_value(TUSB6010_GPIO_ENABLE, 1);
|
|
|
|
|
- msleep(1);
|
|
|
|
|
-
|
|
|
|
|
- /* Wait until TUSB6010 pulls INT pin down */
|
|
|
|
|
- i = 100;
|
|
|
|
|
- while (i && gpio_get_value(TUSB6010_GPIO_INT)) {
|
|
|
|
|
- msleep(1);
|
|
|
|
|
- i--;
|
|
|
|
|
- }
|
|
|
|
|
-
|
|
|
|
|
- if (!i) {
|
|
|
|
|
- printk(KERN_ERR "tusb: powerup failed\n");
|
|
|
|
|
- retval = -ENODEV;
|
|
|
|
|
- }
|
|
|
|
|
- } else {
|
|
|
|
|
- gpio_set_value(TUSB6010_GPIO_ENABLE, 0);
|
|
|
|
|
- msleep(10);
|
|
|
|
|
- }
|
|
|
|
|
-
|
|
|
|
|
- return retval;
|
|
|
|
|
+#define RX51_TSC2005_RESET_GPIO 94
|
|
|
|
|
+#define RX51_TSC2005_IRQ_GPIO 106
|
|
|
|
|
+#define OMAP_TAG_NOKIA_BT 0x4e01
|
|
|
|
|
+
|
|
|
|
|
+/* We map the FN key as LALT to workaround an X keycode problem.
|
|
|
|
|
+ * The XKB map needs to be adjusted to support this. */
|
|
|
|
|
+#define MAP_FN_AS_LEFTALT
|
|
|
|
|
+
|
|
|
|
|
+static s16 rx44_keymap[LM8323_KEYMAP_SIZE] = {
|
|
|
|
|
+ [0x01] = KEY_Q,
|
|
|
|
|
+ [0x02] = KEY_K,
|
|
|
|
@ -149,10 +120,24 @@ Index: linux-2.6.37/arch/arm/mach-omap2/board-n8x0.c |
|
|
|
|
+ [0x22] = KEY_SEMICOLON,
|
|
|
|
|
+ [0x23] = KEY_MINUS,
|
|
|
|
|
+ [0x24] = KEY_EQUAL,
|
|
|
|
|
+#ifdef MAP_FN_AS_LEFTALT
|
|
|
|
|
+ [0x2b] = KEY_LEFTALT,
|
|
|
|
|
+#else
|
|
|
|
|
+ [0x2b] = KEY_FN,
|
|
|
|
|
+#endif
|
|
|
|
|
+ [0x2c] = KEY_M,
|
|
|
|
|
+ [0x2f] = KEY_F8,
|
|
|
|
|
+
|
|
|
|
|
|
|
|
|
|
-#if defined(CONFIG_USB_TUSB6010) || \
|
|
|
|
|
- defined(CONFIG_USB_TUSB6010_MODULE)
|
|
|
|
|
-/*
|
|
|
|
|
- * Enable or disable power to TUSB6010. When enabling, turn on 3.3 V and
|
|
|
|
|
- * 1.5 V voltage regulators of PM companion chip. Companion chip will then
|
|
|
|
|
- * provide then PGOOD signal to TUSB6010 which will release it from reset.
|
|
|
|
|
- */
|
|
|
|
|
-static int tusb_set_power(int state)
|
|
|
|
|
-{
|
|
|
|
|
- int i, retval = 0;
|
|
|
|
|
+ [0x31] = KEY_R,
|
|
|
|
|
+ [0x32] = KEY_RIGHTCTRL,
|
|
|
|
|
+ [0x34] = KEY_SPACE,
|
|
|
|
@ -217,16 +202,46 @@ Index: linux-2.6.37/arch/arm/mach-omap2/board-n8x0.c |
|
|
|
|
+ n8x0_bt_device.dev.platform_data = (void *) bt_config;
|
|
|
|
|
+ if (platform_device_register(&n8x0_bt_device) < 0)
|
|
|
|
|
+ BUG();
|
|
|
|
|
}
|
|
|
|
|
+}
|
|
|
|
|
|
|
|
|
|
- if (state) {
|
|
|
|
|
- gpio_set_value(TUSB6010_GPIO_ENABLE, 1);
|
|
|
|
|
- msleep(1);
|
|
|
|
|
+static struct omap2_mcspi_device_config mipid_mcspi_config = {
|
|
|
|
|
+ .turbo_mode = 0,
|
|
|
|
|
+ .single_channel = 1,
|
|
|
|
|
+};
|
|
|
|
|
|
|
|
|
|
- /* Wait until TUSB6010 pulls INT pin down */
|
|
|
|
|
- i = 100;
|
|
|
|
|
- while (i && gpio_get_value(TUSB6010_GPIO_INT)) {
|
|
|
|
|
- msleep(1);
|
|
|
|
|
- i--;
|
|
|
|
|
- }
|
|
|
|
|
+static int slot1_cover_open;
|
|
|
|
|
+static int slot2_cover_open;
|
|
|
|
|
+static struct device *mmc_device;
|
|
|
|
|
|
|
|
|
|
- if (!i) {
|
|
|
|
|
- printk(KERN_ERR "tusb: powerup failed\n");
|
|
|
|
|
- retval = -ENODEV;
|
|
|
|
|
- }
|
|
|
|
|
- } else {
|
|
|
|
|
- gpio_set_value(TUSB6010_GPIO_ENABLE, 0);
|
|
|
|
|
- msleep(10);
|
|
|
|
|
- }
|
|
|
|
|
|
|
|
|
|
- return retval;
|
|
|
|
|
-}
|
|
|
|
|
-
|
|
|
|
|
-static struct musb_hdrc_config musb_config = {
|
|
|
|
|
- .multipoint = 1,
|
|
|
|
|
- .dyn_fifo = 1,
|
|
|
|
|
- .num_eps = 16,
|
|
|
|
|
- .ram_bits = 12,
|
|
|
|
|
+static struct omap2_mcspi_device_config mipid_mcspi_config = {
|
|
|
|
|
+static struct omap2_mcspi_device_config p54spi_mcspi_config = {
|
|
|
|
|
+ .turbo_mode = 0,
|
|
|
|
|
+ .single_channel = 1,
|
|
|
|
|
+ .single_channel = 1,
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
-static struct musb_hdrc_platform_data tusb_data = {
|
|
|
|
@ -236,15 +251,20 @@ Index: linux-2.6.37/arch/arm/mach-omap2/board-n8x0.c |
|
|
|
|
- .mode = MUSB_PERIPHERAL,
|
|
|
|
|
-#else /* defined(CONFIG_USB_MUSB_HOST) */
|
|
|
|
|
- .mode = MUSB_HOST,
|
|
|
|
|
-#endif
|
|
|
|
|
+#ifdef CONFIG_MACH_NOKIA_N8X0_LCD
|
|
|
|
|
+extern struct mipid_platform_data n8x0_mipid_platform_data;
|
|
|
|
|
#endif
|
|
|
|
|
- .set_power = tusb_set_power,
|
|
|
|
|
- .min_power = 25, /* x2 = 50 mA drawn from VBUS as peripheral */
|
|
|
|
|
- .power = 100, /* Max 100 mA VBUS for host mode */
|
|
|
|
|
- .config = &musb_config,
|
|
|
|
|
-};
|
|
|
|
|
-
|
|
|
|
|
|
|
|
|
|
-static void __init n8x0_usb_init(void)
|
|
|
|
|
-{
|
|
|
|
|
+#ifdef CONFIG_TOUCHSCREEN_TSC2005
|
|
|
|
|
+static struct tsc2005_platform_data tsc2005_config;
|
|
|
|
|
+static void rx51_tsc2005_set_reset(bool enable)
|
|
|
|
|
{
|
|
|
|
|
- int ret = 0;
|
|
|
|
|
- static char announce[] __initdata = KERN_INFO "TUSB 6010\n";
|
|
|
|
|
-
|
|
|
|
@ -258,42 +278,28 @@ Index: linux-2.6.37/arch/arm/mach-omap2/board-n8x0.c |
|
|
|
|
- gpio_direction_output(TUSB6010_GPIO_ENABLE, 0);
|
|
|
|
|
-
|
|
|
|
|
- tusb_set_power(0);
|
|
|
|
|
+static int slot1_cover_open;
|
|
|
|
|
+static int slot2_cover_open;
|
|
|
|
|
+static struct device *mmc_device;
|
|
|
|
|
|
|
|
|
|
-
|
|
|
|
|
- ret = tusb6010_setup_interface(&tusb_data, TUSB6010_REFCLK_19, 2,
|
|
|
|
|
- TUSB6010_ASYNC_CS, TUSB6010_SYNC_CS,
|
|
|
|
|
- TUSB6010_GPIO_INT, TUSB6010_DMACHAN);
|
|
|
|
|
- if (ret != 0)
|
|
|
|
|
- goto err;
|
|
|
|
|
|
|
|
|
|
-
|
|
|
|
|
- printk(announce);
|
|
|
|
|
+static struct omap2_mcspi_device_config p54spi_mcspi_config = {
|
|
|
|
|
+ .turbo_mode = 0,
|
|
|
|
|
+ .single_channel = 1,
|
|
|
|
|
+};
|
|
|
|
|
|
|
|
|
|
-
|
|
|
|
|
- return;
|
|
|
|
|
+#ifdef CONFIG_MACH_NOKIA_N8X0_LCD
|
|
|
|
|
+extern struct mipid_platform_data n8x0_mipid_platform_data;
|
|
|
|
|
+#endif
|
|
|
|
|
|
|
|
|
|
-
|
|
|
|
|
-err:
|
|
|
|
|
- gpio_free(TUSB6010_GPIO_ENABLE);
|
|
|
|
|
+#ifdef CONFIG_TOUCHSCREEN_TSC2005
|
|
|
|
|
+static struct tsc2005_platform_data tsc2005_config;
|
|
|
|
|
+static void rx51_tsc2005_set_reset(bool enable)
|
|
|
|
|
+{
|
|
|
|
|
+ gpio_set_value(RX51_TSC2005_RESET_GPIO, enable);
|
|
|
|
|
}
|
|
|
|
|
-#else
|
|
|
|
|
-
|
|
|
|
|
-static void __init n8x0_usb_init(void) {}
|
|
|
|
|
|
|
|
|
|
-#endif /*CONFIG_USB_TUSB6010 */
|
|
|
|
|
-
|
|
|
|
|
-#endif /*CONFIG_USB_TUSB6010 */
|
|
|
|
|
-
|
|
|
|
|
|
|
|
|
|
-static struct omap2_mcspi_device_config p54spi_mcspi_config = {
|
|
|
|
|
+static struct omap2_mcspi_device_config tsc2005_mcspi_config = {
|
|
|
|
|
.turbo_mode = 0,
|
|
|
|
@ -315,7 +321,7 @@ Index: linux-2.6.37/arch/arm/mach-omap2/board-n8x0.c |
|
|
|
|
{
|
|
|
|
|
.modalias = "p54spi",
|
|
|
|
|
.bus_num = 2,
|
|
|
|
|
@@ -150,8 +201,60 @@
|
|
|
|
|
@@ -150,8 +209,60 @@
|
|
|
|
|
.max_speed_hz = 48000000,
|
|
|
|
|
.controller_data = &p54spi_mcspi_config,
|
|
|
|
|
},
|
|
|
|
@ -376,7 +382,7 @@ Index: linux-2.6.37/arch/arm/mach-omap2/board-n8x0.c |
|
|
|
|
#if defined(CONFIG_MTD_ONENAND_OMAP2) || \
|
|
|
|
|
defined(CONFIG_MTD_ONENAND_OMAP2_MODULE)
|
|
|
|
|
|
|
|
|
|
@@ -184,6 +287,20 @@
|
|
|
|
|
@@ -184,6 +295,20 @@
|
|
|
|
|
},
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
@ -397,7 +403,7 @@ Index: linux-2.6.37/arch/arm/mach-omap2/board-n8x0.c |
|
|
|
|
static struct omap_onenand_platform_data board_onenand_data = {
|
|
|
|
|
.cs = 0,
|
|
|
|
|
.gpio_irq = 26,
|
|
|
|
|
@@ -626,6 +743,11 @@
|
|
|
|
|
@@ -626,6 +751,11 @@
|
|
|
|
|
|
|
|
|
|
static struct i2c_board_info n810_i2c_board_info_2[] __initdata = {
|
|
|
|
|
{
|
|
|
|
@ -409,7 +415,7 @@ Index: linux-2.6.37/arch/arm/mach-omap2/board-n8x0.c |
|
|
|
|
I2C_BOARD_INFO("tlv320aic3x", 0x18),
|
|
|
|
|
.platform_data = &n810_aic33_data,
|
|
|
|
|
},
|
|
|
|
|
@@ -657,10 +779,62 @@
|
|
|
|
|
@@ -657,10 +787,62 @@
|
|
|
|
|
#define board_mux NULL
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
@ -472,7 +478,7 @@ Index: linux-2.6.37/arch/arm/mach-omap2/board-n8x0.c |
|
|
|
|
spi_register_board_info(n800_spi_board_info,
|
|
|
|
|
ARRAY_SIZE(n800_spi_board_info));
|
|
|
|
|
omap_register_i2c_bus(1, 400, n8x0_i2c_board_info_1,
|
|
|
|
|
@@ -671,6 +845,10 @@
|
|
|
|
|
@@ -671,6 +853,10 @@
|
|
|
|
|
ARRAY_SIZE(n810_i2c_board_info_2));
|
|
|
|
|
|
|
|
|
|
omap_serial_init();
|
|
|
|
@ -486,7 +492,7 @@ Index: linux-2.6.37/arch/arm/mach-omap2/board-n8x0.c |
|
|
|
|
Index: linux-2.6.37/arch/arm/mach-omap2/board-n8x0-lcd.c
|
|
|
|
|
===================================================================
|
|
|
|
|
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
|
|
|
|
|
+++ linux-2.6.37/arch/arm/mach-omap2/board-n8x0-lcd.c 2011-01-27 14:17:29.132000007 +0100
|
|
|
|
|
+++ linux-2.6.37/arch/arm/mach-omap2/board-n8x0-lcd.c 2011-01-28 18:10:37.941647955 +0100
|
|
|
|
|
@@ -0,0 +1,127 @@
|
|
|
|
|
+/*
|
|
|
|
|
+ * linux/arch/arm/mach-omap2/board-n8x0.c
|
|
|
|
@ -618,7 +624,7 @@ Index: linux-2.6.37/arch/arm/mach-omap2/board-n8x0-lcd.c |
|
|
|
|
Index: linux-2.6.37/arch/arm/mach-omap2/board-n8x0-usb.c
|
|
|
|
|
===================================================================
|
|
|
|
|
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
|
|
|
|
|
+++ linux-2.6.37/arch/arm/mach-omap2/board-n8x0-usb.c 2011-01-27 14:17:29.132000007 +0100
|
|
|
|
|
+++ linux-2.6.37/arch/arm/mach-omap2/board-n8x0-usb.c 2011-01-28 18:09:59.378233620 +0100
|
|
|
|
|
@@ -0,0 +1,175 @@
|
|
|
|
|
+/*
|
|
|
|
|
+ * linux/arch/arm/mach-omap2/board-n8x0-usb.c
|
|
|
|
@ -797,8 +803,8 @@ Index: linux-2.6.37/arch/arm/mach-omap2/board-n8x0-usb.c |
|
|
|
|
+}
|
|
|
|
|
Index: linux-2.6.37/arch/arm/mach-omap2/control.c
|
|
|
|
|
===================================================================
|
|
|
|
|
--- linux-2.6.37.orig/arch/arm/mach-omap2/control.c 2011-01-27 14:17:04.403000007 +0100
|
|
|
|
|
+++ linux-2.6.37/arch/arm/mach-omap2/control.c 2011-01-27 14:17:29.132000007 +0100
|
|
|
|
|
--- linux-2.6.37.orig/arch/arm/mach-omap2/control.c 2011-01-05 01:50:19.000000000 +0100
|
|
|
|
|
+++ linux-2.6.37/arch/arm/mach-omap2/control.c 2011-01-28 18:09:59.378233620 +0100
|
|
|
|
|
@@ -172,6 +172,7 @@
|
|
|
|
|
return __raw_readw(OMAP_CTRL_REGADDR(offset));
|
|
|
|
|
}
|
|
|
|
@ -817,8 +823,8 @@ Index: linux-2.6.37/arch/arm/mach-omap2/control.c |
|
|
|
|
__raw_writel(val, OMAP_CTRL_REGADDR(offset));
|
|
|
|
|
Index: linux-2.6.37/arch/arm/mach-omap2/Kconfig
|
|
|
|
|
===================================================================
|
|
|
|
|
--- linux-2.6.37.orig/arch/arm/mach-omap2/Kconfig 2011-01-27 14:17:04.391000007 +0100
|
|
|
|
|
+++ linux-2.6.37/arch/arm/mach-omap2/Kconfig 2011-01-27 14:17:29.132000007 +0100
|
|
|
|
|
--- linux-2.6.37.orig/arch/arm/mach-omap2/Kconfig 2011-01-05 01:50:19.000000000 +0100
|
|
|
|
|
+++ linux-2.6.37/arch/arm/mach-omap2/Kconfig 2011-01-28 18:09:59.378233620 +0100
|
|
|
|
|
@@ -210,6 +210,16 @@
|
|
|
|
|
select MACH_NOKIA_N810
|
|
|
|
|
select MACH_NOKIA_N810_WIMAX
|
|
|
|
@ -838,8 +844,8 @@ Index: linux-2.6.37/arch/arm/mach-omap2/Kconfig |
|
|
|
|
depends on ARCH_OMAP3
|
|
|
|
|
Index: linux-2.6.37/arch/arm/mach-omap2/Makefile
|
|
|
|
|
===================================================================
|
|
|
|
|
--- linux-2.6.37.orig/arch/arm/mach-omap2/Makefile 2011-01-27 14:17:04.386000007 +0100
|
|
|
|
|
+++ linux-2.6.37/arch/arm/mach-omap2/Makefile 2011-01-27 14:17:29.132000007 +0100
|
|
|
|
|
--- linux-2.6.37.orig/arch/arm/mach-omap2/Makefile 2011-01-05 01:50:19.000000000 +0100
|
|
|
|
|
+++ linux-2.6.37/arch/arm/mach-omap2/Makefile 2011-01-28 18:09:59.378233620 +0100
|
|
|
|
|
@@ -139,6 +139,8 @@
|
|
|
|
|
hsmmc.o \
|
|
|
|
|
board-flash.o
|
|
|
|
@ -849,33 +855,3 @@ Index: linux-2.6.37/arch/arm/mach-omap2/Makefile |
|
|
|
|
obj-$(CONFIG_MACH_NOKIA_RX51) += board-rx51.o \
|
|
|
|
|
board-rx51-sdram.o \
|
|
|
|
|
board-rx51-peripherals.o \
|
|
|
|
|
Index: linux-2.6.37/arch/arm/mach-omap2/serial.c
|
|
|
|
|
===================================================================
|
|
|
|
|
--- linux-2.6.37.orig/arch/arm/mach-omap2/serial.c 2011-01-27 14:17:04.398000007 +0100
|
|
|
|
|
+++ linux-2.6.37/arch/arm/mach-omap2/serial.c 2011-01-27 14:17:29.132000007 +0100
|
|
|
|
|
@@ -546,14 +546,17 @@
|
|
|
|
|
uart->padconf = 0;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
+#if 1
|
|
|
|
|
uart->irqflags |= IRQF_SHARED;
|
|
|
|
|
ret = request_threaded_irq(uart->irq, NULL, omap_uart_interrupt,
|
|
|
|
|
IRQF_SHARED, "serial idle", (void *)uart);
|
|
|
|
|
WARN_ON(ret);
|
|
|
|
|
+#endif
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
void omap_uart_enable_irqs(int enable)
|
|
|
|
|
{
|
|
|
|
|
+#if 1
|
|
|
|
|
int ret;
|
|
|
|
|
struct omap_uart_state *uart;
|
|
|
|
|
|
|
|
|
|
@@ -570,6 +573,7 @@
|
|
|
|
|
free_irq(uart->irq, (void *)uart);
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
+#endif
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static ssize_t sleep_timeout_show(struct device *dev,
|
|
|
|
|