bump to version 0.6.9. Synced config with upstream version.

SVN-Revision: 14993

package/wpa_supplicant/Makefile

@@ -9,9 +9,9 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=wpa_supplicant
-PKG_VERSION:=0.6.8
+PKG_VERSION:=0.6.9
 PKG_RELEASE:=1
-PKG_MD5SUM:=e933332490e0e5acfef2279457f1070a
+PKG_MD5SUM:=0efb8fcedf0a8acf6f423dfdb0658fdd
 
 PKG_SOURCE_URL:=http://hostap.epitest.fi/releases
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.gz

package/wpa_supplicant/config

@@ -41,7 +41,7 @@
 
 
 # Driver interface for Host AP driver
-# CONFIG_DRIVER_HOSTAP=y
+#CONFIG_DRIVER_HOSTAP=y
 
 # Driver interface for Agere driver
 #CONFIG_DRIVER_HERMES=y
@@ -51,8 +51,8 @@
 
 # Driver interface for madwifi driver
 CONFIG_DRIVER_MADWIFI=y
-# Change include directories to match with the local setup
-#CFLAGS += -I../madwifi/wpa
+# Set include directory to the madwifi source tree
+#CFLAGS += -I../../madwifi
 
 # Driver interface for Prism54 driver
 # (Note: Prism54 is not yet supported, i.e., this will not work as-is and is
@@ -65,7 +65,10 @@ CONFIG_DRIVER_MADWIFI=y
 # Driver interface for Atmel driver
 #CONFIG_DRIVER_ATMEL=y
 
-# Driver interface for Broadcom driver
+# Driver interface for old Broadcom driver
+# Please note that the newer Broadcom driver ("hybrid Linux driver") supports
+# Linux wireless extensions and does not need (or even work) with the old
+# driver wrapper. Use CONFIG_DRIVER_WEXT=y with that driver.
 #CONFIG_DRIVER_BROADCOM=y
 # Example path for wlioctl.h; change to match your configuration
 #CFLAGS += -I/opt/WRT54GS/release/src/include
@@ -79,6 +82,9 @@ CONFIG_DRIVER_MADWIFI=y
 # Driver interface for generic Linux wireless extensions
 CONFIG_DRIVER_WEXT=y
 
+# Driver interface for Linux drivers using the nl80211 kernel interface
+CONFIG_DRIVER_NL80211=y
+
 # Driver interface for FreeBSD net80211 layer (e.g., Atheros driver)
 #CONFIG_DRIVER_BSD=y
 #CFLAGS += -I/usr/local/include
@@ -106,6 +112,9 @@ CONFIG_DRIVER_WEXT=y
 # Driver interface for wired Ethernet drivers
 CONFIG_DRIVER_WIRED=y
 
+# Driver interface for the Broadcom RoboSwitch family
+#CONFIG_DRIVER_ROBOSWITCH=y
+
 # Enable IEEE 802.1X Supplicant (automatically included if any EAP method is
 # included)
 CONFIG_IEEE8021X_EAPOL=y
@@ -153,6 +162,13 @@ CONFIG_EAP_LEAP=y
 # EAP-AKA (enable CONFIG_PCSC, if EAP-AKA is used)
 #CONFIG_EAP_AKA=y
 
+# EAP-AKA' (enable CONFIG_PCSC, if EAP-AKA' is used).
+# This requires CONFIG_EAP_AKA to be enabled, too.
+#CONFIG_EAP_AKA_PRIME=y
+
+# Enable USIM simulator (Milenage) for EAP-AKA
+#CONFIG_USIM_SIMULATOR=y
+
 # EAP-SAKE
 #CONFIG_EAP_SAKE=y
 
@@ -164,6 +180,9 @@ CONFIG_EAP_LEAP=y
 # EAP-TNC and related Trusted Network Connect support (experimental)
 #CONFIG_EAP_TNC=y
 
+# Wi-Fi Protected Setup (WPS)
+#CONFIG_WPS=y
+
 # EAP-IKEv2
 #CONFIG_EAP_IKEV2=y
 
@@ -307,6 +326,10 @@ CONFIG_INTERNAL_LIBTOMMATH=y
 #LIBS += -L$(LTM_PATH)
 #LIBS_p += -L$(LTM_PATH)
 #endif
+# At the cost of about 4 kB of additional binary size, the internal LibTomMath
+# can be configured to include faster routines for exptmod, sqr, and div to
+# speed up DH and RSA calculation considerably
+#CONFIG_INTERNAL_LIBTOMMATH_FAST=y
 
 # Include NDIS event processing through WMI into wpa_supplicant/wpasvc.
 # This is only for Windows builds and requires WMI-related header files and
@@ -339,20 +362,13 @@ CONFIG_INTERNAL_LIBTOMMATH=y
 #CONFIG_DYNAMIC_EAP_METHODS=y
 
 # Include client MLME (management frame processing).
-# This can be used to move MLME processing of Devicescape IEEE 802.11 stack
-# into user space.
+# This can be used to move MLME processing of Linux mac80211 stack into user
+# space. Please note that this is currently only available with
+# driver_nl80211.c and only with a modified version of Linux kernel and
+# wpa_supplicant.
 #CONFIG_CLIENT_MLME=y
-# Currently, driver_devicescape.c build requires some additional parameters
-# to be able to include some of the kernel header files. Following lines can
-# be used to set these (WIRELESS_DEV must point to the root directory of the
-# wireless-dev.git tree).
-#WIRELESS_DEV=/usr/src/wireless-dev
-#CFLAGS += -I$(WIRELESS_DEV)/net/mac80211
-
-# IEEE 802.11r/D4.1 (Fast BSS Transition)
-# This enables an experimental implementation of a draft version of
-# IEEE 802.11r. This draft is still subject to change, so it should be noted
-# that this version may not comply with the final standard.
+
+# IEEE Std 802.11r-2008 (Fast BSS Transition)
 #CONFIG_IEEE80211R=y
 
 # Add support for writing debug log to a file (/tmp/wpa_supplicant-log-#.txt)
@@ -360,3 +376,7 @@ CONFIG_DEBUG_FILE=y
 
 # Enable privilege separation (see README 'Privilege separation' for details)
 #CONFIG_PRIVSEP=y
+
+# Enable mitigation against certain attacks against TKIP by delaying Michael
+# MIC error reports by a random amount of time between 0 and 60 seconds
+#CONFIG_DELAYED_MIC_ERROR_REPORT=y

package/wpa_supplicant/patches/110-roaming.patch

@@ -1,7 +1,7 @@
 This patch decreases the timeouts for assoc/auth to more realistic values. Improves roaming speed
 --- a/wpa_supplicant/events.c
 +++ b/wpa_supplicant/events.c
-@@ -849,7 +849,7 @@ static void wpa_supplicant_event_assoc(s
+@@ -854,7 +854,7 @@ static void wpa_supplicant_event_assoc(s
  		wpa_supplicant_set_state(wpa_s, WPA_COMPLETED);
  	} else if (!ft_completed) {
  		/* Timeout for receiving the first EAPOL packet */

package/wpa_supplicant/patches/130-scanning.patch

@@ -50,7 +50,7 @@ Add a scan result cache to improve roaming speed if the driver gave us a backgro
  #ifdef EAP_TLS_OPENSSL
 --- a/wpa_supplicant/events.c
 +++ b/wpa_supplicant/events.c
-@@ -536,7 +536,7 @@ wpa_supplicant_select_bss_non_wpa(struct
+@@ -541,7 +541,7 @@ wpa_supplicant_select_bss_non_wpa(struct
  					   "BSSID mismatch");
  				continue;
  			}
@@ -59,7 +59,7 @@ Add a scan result cache to improve roaming speed if the driver gave us a backgro
  			if (!(ssid->key_mgmt & WPA_KEY_MGMT_NONE) &&
  			    !(ssid->key_mgmt & WPA_KEY_MGMT_WPS) &&
  			    !(ssid->key_mgmt & WPA_KEY_MGMT_IEEE8021X_NO_WPA))
-@@ -546,7 +546,7 @@ wpa_supplicant_select_bss_non_wpa(struct
+@@ -551,7 +551,7 @@ wpa_supplicant_select_bss_non_wpa(struct
  				continue;
  			}
  
@@ -68,7 +68,7 @@ Add a scan result cache to improve roaming speed if the driver gave us a backgro
  			     (WPA_KEY_MGMT_IEEE8021X | WPA_KEY_MGMT_PSK |
  			      WPA_KEY_MGMT_FT_IEEE8021X | WPA_KEY_MGMT_FT_PSK |
  			      WPA_KEY_MGMT_IEEE8021X_SHA256 |
-@@ -635,6 +635,9 @@ static void wpa_supplicant_event_scan_re
+@@ -640,6 +640,9 @@ static void wpa_supplicant_event_scan_re
  	    wpa_s->disconnected)
  		return;
  
@@ -78,7 +78,7 @@ Add a scan result cache to improve roaming speed if the driver gave us a backgro
  	while (selected == NULL) {
  		for (prio = 0; prio < wpa_s->conf->num_prio; prio++) {
  			selected = wpa_supplicant_select_bss(
-@@ -647,6 +650,7 @@ static void wpa_supplicant_event_scan_re
+@@ -652,6 +655,7 @@ static void wpa_supplicant_event_scan_re
  			wpa_printf(MSG_DEBUG, "No APs found - clear blacklist "
  				   "and try again");
  			wpa_blacklist_clear(wpa_s);
@@ -86,7 +86,7 @@ Add a scan result cache to improve roaming speed if the driver gave us a backgro
  			wpa_s->blacklist_cleared++;
  		} else if (selected == NULL) {
  			break;
-@@ -682,10 +686,12 @@ static void wpa_supplicant_event_scan_re
+@@ -687,10 +691,12 @@ static void wpa_supplicant_event_scan_re
  		rsn_preauth_scan_results(wpa_s->wpa, wpa_s->scan_res);
  	} else {
  		wpa_printf(MSG_DEBUG, "No suitable AP found.");
@@ -100,7 +100,7 @@ Add a scan result cache to improve roaming speed if the driver gave us a backgro
  	return;
  
  req_scan:
-@@ -889,6 +895,9 @@ static void wpa_supplicant_event_disasso
+@@ -894,6 +900,9 @@ static void wpa_supplicant_event_disasso
  	}
  	if (wpa_s->wpa_state >= WPA_ASSOCIATED)
  		wpa_supplicant_req_scan(wpa_s, 0, 100000);