hsist
/
freifunkist-firmware
6
1
Fork 0
Code Issues Pull Requests Releases Wiki Activity

also take over the files for 2.6.31

Browse Source 
SVN-Revision: 17356
master
Mirko Vogt 15 years ago
parent a25cec813e
commit fb4727d391
11 changed files with 2627 additions and 0 deletions
Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL
Show Stats Download Patch File Download Diff File
  1. 201
      target/linux/generic-2.6/files-2.6.31/drivers/char/gpio_dev.c
  2. 209
      target/linux/generic-2.6/files-2.6.31/drivers/input/misc/gpio_buttons.c
  3. 172
      target/linux/generic-2.6/files-2.6.31/drivers/leds/leds-alix.c
  4. 365
      target/linux/generic-2.6/files-2.6.31/drivers/leds/ledtrig-morse.c
  5. 454
      target/linux/generic-2.6/files-2.6.31/drivers/leds/ledtrig-netdev.c
  6. 651
      target/linux/generic-2.6/files-2.6.31/drivers/net/phy/ar8216.c
  7. 467
      target/linux/generic-2.6/files-2.6.31/drivers/net/phy/mvswitch.c
  8. 27
      target/linux/generic-2.6/files-2.6.31/include/linux/glamo-engine.h
  9. 35
      target/linux/generic-2.6/files-2.6.31/include/linux/glamofb.h
  10. 35
      target/linux/generic-2.6/files-2.6.31/include/linux/gpio_buttons.h
  11. 11
      target/linux/generic-2.6/files-2.6.31/include/linux/gpio_dev.h

201
target/linux/generic-2.6/files-2.6.31/drivers/char/gpio_dev.c
Unescape View File

@ -0,0 +1,201 @@
/*
* character device wrapper for generic gpio layer
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA02111-1307USA
*
* Feedback, Bugs... blogic@openwrt.org
*
*/
#include <linux/module.h>
#include <linux/errno.h>
#include <linux/init.h>
#include <asm/uaccess.h>
#include <asm/io.h>
#include <asm/gpio.h>
#include <asm/atomic.h>
#include <linux/init.h>
#include <linux/genhd.h>
#include <linux/device.h>
#include <linux/platform_device.h>
#include <linux/gpio_dev.h>
#define DRVNAME "gpiodev"
#define DEVNAME "gpio"
static int dev_major;
static unsigned int gpio_access_mask;
static struct class *gpiodev_class;
/* Counter is 1, if the device is not opened and zero (or less) if opened. */
static atomic_t gpio_open_cnt = ATOMIC_INIT(1);
static int
gpio_ioctl(struct inode * inode, struct file * file, unsigned int cmd, unsigned long arg)
{
int retval = 0;
if (((1 << arg) & gpio_access_mask) != (1 << arg))
{
retval = -EINVAL;
goto out;
}
switch (cmd)
{
case GPIO_GET:
retval = gpio_get_value(arg);
break;
case GPIO_SET:
gpio_set_value(arg, 1);
break;
case GPIO_CLEAR:
gpio_set_value(arg, 0);
break;
case GPIO_DIR_IN:
gpio_direction_input(arg);
break;
case GPIO_DIR_OUT:
gpio_direction_output(arg, 0);
break;
default:
retval = -EINVAL;
break;
}
out:
return retval;
}
static int
gpio_open(struct inode *inode, struct file *file)
{
int result = 0;
unsigned int dev_minor = MINOR(inode->i_rdev);
if (dev_minor != 0)
{
printk(KERN_ERR DRVNAME ": trying to access unknown minor device -> %d\n", dev_minor);
result = -ENODEV;
goto out;
}
/* FIXME: We should really allow multiple applications to open the device
* at the same time, as long as the apps access different IO pins.
* The generic gpio-registration functions can be used for that.
* Two new IOCTLs have to be introduced for that. Need to check userspace
* compatibility first. --mb */
if (!atomic_dec_and_test(&gpio_open_cnt)) {
atomic_inc(&gpio_open_cnt);
printk(KERN_ERR DRVNAME ": Device with minor ID %d already in use\n", dev_minor);
result = -EBUSY;
goto out;
}
out:
return result;
}
static int
gpio_close(struct inode * inode, struct file * file)
{
smp_mb__before_atomic_inc();
atomic_inc(&gpio_open_cnt);
return 0;
}
struct file_operations gpio_fops = {
ioctl: gpio_ioctl,
open: gpio_open,
release: gpio_close
};
static int
gpio_probe(struct platform_device *dev)
{
int result = 0;
dev_major = register_chrdev(0, DEVNAME, &gpio_fops);
if (!dev_major)
{
printk(KERN_ERR DRVNAME ": Error whilst opening %s \n", DEVNAME);
result = -ENODEV;
goto out;
}
gpiodev_class = class_create(THIS_MODULE, DRVNAME);
device_create(gpiodev_class, NULL, MKDEV(dev_major, 0), dev, DEVNAME);
printk(KERN_INFO DRVNAME ": gpio device registered with major %d\n", dev_major);
if (dev->num_resources != 1)
{
printk(KERN_ERR DRVNAME ": device may only have 1 resource\n");
result = -ENODEV;
goto out;
}
gpio_access_mask = dev->resource[0].start;
printk(KERN_INFO DRVNAME ": gpio platform device registered with access mask %08X\n", gpio_access_mask);
out:
return result;
}
static int
gpio_remove(struct platform_device *dev)
{
unregister_chrdev(dev_major, DEVNAME);
return 0;
}
static struct
platform_driver gpio_driver = {
.probe = gpio_probe,
.remove = gpio_remove,
.driver = {
.name = "GPIODEV",
.owner = THIS_MODULE,
},
};
static int __init
gpio_mod_init(void)
{
int ret = platform_driver_register(&gpio_driver);
if (ret)
printk(KERN_INFO DRVNAME ": Error registering platfom driver!");
return ret;
}
static void __exit
gpio_mod_exit(void)
{
platform_driver_unregister(&gpio_driver);
}
module_init (gpio_mod_init);
module_exit (gpio_mod_exit);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("John Crispin / OpenWrt");
MODULE_DESCRIPTION("Character device for for generic gpio api");

209
target/linux/generic-2.6/files-2.6.31/drivers/input/misc/gpio_buttons.c
Unescape View File

@ -0,0 +1,209 @@
/*
* Driver for buttons on GPIO lines not capable of generating interrupts
*
* Copyright (C) 2007,2008 Gabor Juhos <juhosg at openwrt.org>
*
* This file was based on: /drivers/input/misc/cobalt_btns.c
* Copyright (C) 2007 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
*
* also was based on: /drivers/input/keyboard/gpio_keys.c
* Copyright 2005 Phil Blundell
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/input.h>
#include <linux/input-polldev.h>
#include <linux/ioport.h>
#include <linux/platform_device.h>
#include <linux/gpio_buttons.h>
#include <asm/gpio.h>
#define DRV_NAME "gpio-buttons"
#define DRV_VERSION "0.1.1"
#define PFX DRV_NAME ": "
struct gpio_buttons_dev {
struct input_polled_dev *poll_dev;
struct gpio_buttons_platform_data *pdata;
};
static void gpio_buttons_poll(struct input_polled_dev *dev)
{
struct gpio_buttons_dev *bdev = dev->private;
struct gpio_buttons_platform_data *pdata = bdev->pdata;
struct input_dev *input = dev->input;
int i;
for (i = 0; i < bdev->pdata->nbuttons; i++) {
struct gpio_button *button = &pdata->buttons[i];
unsigned int type = button->type ?: EV_KEY;
int state;
state = gpio_get_value(button->gpio) ? 1 : 0;
state ^= button->active_low;
if (state) {
button->count++;
} else {
if (button->count >= button->threshold) {
input_event(input, type, button->code, 1);
input_sync(input);
}
button->count = 0;
}
if (button->count == button->threshold) {
input_event(input, type, button->code, 0);
input_sync(input);
}
}
}
static int __devinit gpio_buttons_probe(struct platform_device *pdev)
{
struct gpio_buttons_platform_data *pdata = pdev->dev.platform_data;
struct gpio_buttons_dev *bdev;
struct input_polled_dev *poll_dev;
struct input_dev *input;
int error, i;
if (!pdata)
return -ENXIO;
bdev = kzalloc(sizeof(*bdev), GFP_KERNEL);
if (!bdev) {
printk(KERN_ERR DRV_NAME "no memory for device\n");
return -ENOMEM;
}
poll_dev = input_allocate_polled_device();
if (!poll_dev) {
printk(KERN_ERR DRV_NAME "no memory for polled device\n");
error = -ENOMEM;
goto err_free_bdev;
}
poll_dev->private = bdev;
poll_dev->poll = gpio_buttons_poll;
poll_dev->poll_interval = pdata->poll_interval;
input = poll_dev->input;
input->evbit[0] = BIT(EV_KEY);
input->name = pdev->name;
input->phys = "gpio-buttons/input0";
input->dev.parent = &pdev->dev;
input->id.bustype = BUS_HOST;
input->id.vendor = 0x0001;
input->id.product = 0x0001;
input->id.version = 0x0100;
for (i = 0; i < pdata->nbuttons; i++) {
struct gpio_button *button = &pdata->buttons[i];
unsigned int gpio = button->gpio;
unsigned int type = button->type ?: EV_KEY;
error = gpio_request(gpio, button->desc ?
button->desc : DRV_NAME);
if (error) {
printk(KERN_ERR PFX "unable to claim gpio %u, "
"error %d\n", gpio, error);
goto err_free_gpio;
}
error = gpio_direction_input(gpio);
if (error) {
printk(KERN_ERR PFX "unable to set direction on "
"gpio %u, error %d\n", gpio, error);
goto err_free_gpio;
}
input_set_capability(input, type, button->code);
button->count = 0;
}
bdev->poll_dev = poll_dev;
bdev->pdata = pdata;
platform_set_drvdata(pdev, bdev);
error = input_register_polled_device(poll_dev);
if (error) {
printk(KERN_ERR PFX "unable to register polled device, "
"error %d\n", error);
goto err_free_gpio;
}
return 0;
err_free_gpio:
for (i = i - 1; i >= 0; i--)
gpio_free(pdata->buttons[i].gpio);
input_free_polled_device(poll_dev);
err_free_bdev:
kfree(bdev);
platform_set_drvdata(pdev, NULL);
return error;
}
static int __devexit gpio_buttons_remove(struct platform_device *pdev)
{
struct gpio_buttons_dev *bdev = platform_get_drvdata(pdev);
struct gpio_buttons_platform_data *pdata = bdev->pdata;
int i;
input_unregister_polled_device(bdev->poll_dev);
for (i = 0; i < pdata->nbuttons; i++)
gpio_free(pdata->buttons[i].gpio);
input_free_polled_device(bdev->poll_dev);
kfree(bdev);
platform_set_drvdata(pdev, NULL);
return 0;
}
static struct platform_driver gpio_buttons_driver = {
.probe = gpio_buttons_probe,
.remove = __devexit_p(gpio_buttons_remove),
.driver = {
.name = DRV_NAME,
.owner = THIS_MODULE,
},
};
static int __init gpio_buttons_init(void)
{
printk(KERN_INFO DRV_NAME " driver version " DRV_VERSION "\n");
return platform_driver_register(&gpio_buttons_driver);
}
static void __exit gpio_buttons_exit(void)
{
platform_driver_unregister(&gpio_buttons_driver);
}
module_init(gpio_buttons_init);
module_exit(gpio_buttons_exit);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Gabor Juhos <juhosg at openwrt.org>");
MODULE_VERSION(DRV_VERSION);
MODULE_DESCRIPTION("Polled buttons driver for CPU GPIOs");

172
target/linux/generic-2.6/files-2.6.31/drivers/leds/leds-alix.c
Unescape View File

@ -0,0 +1,172 @@
/*
* LEDs driver for PCEngines ALIX 2/3 series
*
* Copyright (C) 2007 Petr Liebman
*
* Based on leds-wrap.c
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/leds.h>
#include <linux/err.h>
#include <asm/io.h>
#define DRVNAME "alix-led"
#define ALIX_LED1_PORT (0x6100)
#define ALIX_LED1_ON (1<<22)
#define ALIX_LED1_OFF (1<<6)
#define ALIX_LED2_PORT (0x6180)
#define ALIX_LED2_ON (1<<25)
#define ALIX_LED2_OFF (1<<9)
#define ALIX_LED3_PORT (0x6180)
#define ALIX_LED3_ON (1<<27)
#define ALIX_LED3_OFF (1<<11)
static struct platform_device *pdev;
static void alix_led_set_1(struct led_classdev *led_cdev,
enum led_brightness value)
{
if (value)
outl(ALIX_LED1_ON, ALIX_LED1_PORT);
else
outl(ALIX_LED1_OFF, ALIX_LED1_PORT);
}
static void alix_led_set_2(struct led_classdev *led_cdev,
enum led_brightness value)
{
if (value)
outl(ALIX_LED2_ON, ALIX_LED2_PORT);
else
outl(ALIX_LED2_OFF, ALIX_LED2_PORT);
}
static void alix_led_set_3(struct led_classdev *led_cdev,
enum led_brightness value)
{
if (value)
outl(ALIX_LED3_ON, ALIX_LED3_PORT);
else
outl(ALIX_LED3_OFF, ALIX_LED3_PORT);
}
static struct led_classdev alix_led_1 = {
.name = "alix:1",
.brightness_set = alix_led_set_1,
};
static struct led_classdev alix_led_2 = {
.name = "alix:2",
.brightness_set = alix_led_set_2,
};
static struct led_classdev alix_led_3 = {
.name = "alix:3",
.brightness_set = alix_led_set_3,
};
#ifdef CONFIG_PM
static int alix_led_suspend(struct platform_device *dev,
pm_message_t state)
{
led_classdev_suspend(&alix_led_1);
led_classdev_suspend(&alix_led_2);
led_classdev_suspend(&alix_led_3);
return 0;
}
static int alix_led_resume(struct platform_device *dev)
{
led_classdev_resume(&alix_led_1);
led_classdev_resume(&alix_led_2);
led_classdev_resume(&alix_led_3);
return 0;
}
#else
#define alix_led_suspend NULL
#define alix_led_resume NULL
#endif
static int alix_led_probe(struct platform_device *pdev)
{
int ret;
ret = led_classdev_register(&pdev->dev, &alix_led_1);
if (ret >= 0)
{
ret = led_classdev_register(&pdev->dev, &alix_led_2);
if (ret >= 0)
{
ret = led_classdev_register(&pdev->dev, &alix_led_3);
if (ret < 0)
led_classdev_unregister(&alix_led_2);
}
if (ret < 0)
led_classdev_unregister(&alix_led_1);
}
return ret;
}
static int alix_led_remove(struct platform_device *pdev)
{
led_classdev_unregister(&alix_led_1);
led_classdev_unregister(&alix_led_2);
led_classdev_unregister(&alix_led_3);
return 0;
}
static struct platform_driver alix_led_driver = {
.probe = alix_led_probe,
.remove = alix_led_remove,
.suspend = alix_led_suspend,
.resume = alix_led_resume,
.driver = {
.name = DRVNAME,
.owner = THIS_MODULE,
},
};
static int __init alix_led_init(void)
{
int ret;
ret = platform_driver_register(&alix_led_driver);
if (ret < 0)
goto out;
pdev = platform_device_register_simple(DRVNAME, -1, NULL, 0);
if (IS_ERR(pdev)) {
ret = PTR_ERR(pdev);
platform_driver_unregister(&alix_led_driver);
goto out;
}
out:
return ret;
}
static void __exit alix_led_exit(void)
{
platform_device_unregister(pdev);
platform_driver_unregister(&alix_led_driver);
}
module_init(alix_led_init);
module_exit(alix_led_exit);
MODULE_AUTHOR("Petr Liebman");
MODULE_DESCRIPTION("PCEngines ALIX LED driver");
MODULE_LICENSE("GPL");

365
target/linux/generic-2.6/files-2.6.31/drivers/leds/ledtrig-morse.c
Unescape View File

@ -0,0 +1,365 @@
/*
* LED Morse Trigger
*
* Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org>
*
* This file was based on: drivers/led/ledtrig-timer.c
* Copyright 2005-2006 Openedhand Ltd.
* Author: Richard Purdie <rpurdie@openedhand.com>
*
* also based on the patch '[PATCH] 2.5.59 morse code panics' posted
* in the LKML by Tomas Szepe at Thu, 30 Jan 2003
* Copyright (C) 2002 Andrew Rodland <arodland@noln.com>
* Copyright (C) 2003 Tomas Szepe <szepe@pinerecords.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
*
*/
#include <linux/kernel.h>
#include <linux/version.h>
#include <linux/module.h>
#include <linux/jiffies.h>
#include <linux/init.h>
#include <linux/list.h>
#include <linux/spinlock.h>
#include <linux/device.h>
#include <linux/sysdev.h>
#include <linux/timer.h>
#include <linux/ctype.h>
#include <linux/leds.h>
#include "leds.h"
#define MORSE_DELAY_BASE (HZ/2)
#define MORSE_STATE_BLINK_START 0
#define MORSE_STATE_BLINK_STOP 1
#define MORSE_DIT_LEN 1
#define MORSE_DAH_LEN 3
#define MORSE_SPACE_LEN 7
struct morse_trig_data {
unsigned long delay;
char *msg;
unsigned char morse;
unsigned char state;
char *msgpos;
struct timer_list timer;
};
const unsigned char morsetable[] = {
0122, 0, 0310, 0, 0, 0163, /* "#$%&' */
055, 0155, 0, 0, 0163, 0141, 0152, 0051, /* ()*+,-./ */
077, 076, 074, 070, 060, 040, 041, 043, 047, 057, /* 0-9 */
0107, 0125, 0, 0061, 0, 0114, 0, /* :;<=>?@ */
006, 021, 025, 011, 002, 024, 013, 020, 004, /* A-I */
036, 015, 022, 007, 005, 017, 026, 033, 012, /* J-R */
010, 003, 014, 030, 016, 031, 035, 023, /* S-Z */
0, 0, 0, 0, 0154 /* [\]^_ */
};
static inline unsigned char tomorse(char c) {
if (c >= 'a' && c <= 'z')
c = c - 'a' + 'A';
if (c >= '"' && c <= '_') {
return morsetable[c - '"'];
} else
return 0;
}
static inline unsigned long dit_len(struct morse_trig_data *morse_data)
{
return MORSE_DIT_LEN*morse_data->delay;
}
static inline unsigned long dah_len(struct morse_trig_data *morse_data)
{
return MORSE_DAH_LEN*morse_data->delay;
}
static inline unsigned long space_len(struct morse_trig_data *morse_data)
{
return MORSE_SPACE_LEN*morse_data->delay;
}
static void morse_timer_function(unsigned long data)
{
struct led_classdev *led_cdev = (struct led_classdev *)data;
struct morse_trig_data *morse_data = led_cdev->trigger_data;
unsigned long brightness = LED_OFF;
unsigned long delay = 0;
if (!morse_data->msg)
goto set_led;
switch (morse_data->state) {
case MORSE_STATE_BLINK_START:
/* Starting a new blink. We have a valid code in morse. */
delay = (morse_data->morse & 001) ? dah_len(morse_data):
dit_len(morse_data);
brightness = LED_FULL;
morse_data->state = MORSE_STATE_BLINK_STOP;
morse_data->morse >>= 1;
break;
case MORSE_STATE_BLINK_STOP:
/* Coming off of a blink. */
morse_data->state = MORSE_STATE_BLINK_START;
if (morse_data->morse > 1) {
/* Not done yet, just a one-dit pause. */
delay = dit_len(morse_data);
break;
}
/* Get a new char, figure out how much space. */
/* First time through */
if (!morse_data->msgpos)
morse_data->msgpos = (char *)morse_data->msg;
if (!*morse_data->msgpos) {
/* Repeating */
morse_data->msgpos = (char *)morse_data->msg;
delay = space_len(morse_data);
} else {
/* Inter-letter space */
delay = dah_len(morse_data);
}
if (!(morse_data->morse = tomorse(*morse_data->msgpos))) {
delay = space_len(morse_data);
/* And get us back here */
morse_data->state = MORSE_STATE_BLINK_STOP;
}
morse_data->msgpos++;
break;
}
mod_timer(&morse_data->timer, jiffies + msecs_to_jiffies(delay));
set_led:
led_set_brightness(led_cdev, brightness);
}
static ssize_t _morse_delay_show(struct led_classdev *led_cdev, char *buf)
{
struct morse_trig_data *morse_data = led_cdev->trigger_data;
sprintf(buf, "%lu\n", morse_data->delay);
return strlen(buf) + 1;
}
static ssize_t _morse_delay_store(struct led_classdev *led_cdev,
const char *buf, size_t size)
{
struct morse_trig_data *morse_data = led_cdev->trigger_data;
char *after;
unsigned long state = simple_strtoul(buf, &after, 10);
size_t count = after - buf;
int ret = -EINVAL;
if (*after && isspace(*after))
count++;
if (count == size) {
morse_data->delay = state;
mod_timer(&morse_data->timer, jiffies + 1);
ret = count;
}
return ret;
}
static ssize_t _morse_msg_show(struct led_classdev *led_cdev, char *buf)
{
struct morse_trig_data *morse_data = led_cdev->trigger_data;
if (!morse_data->msg)
sprintf(buf, "<none>\n");
else
sprintf(buf, "%s\n", morse_data->msg);
return strlen(buf) + 1;
}
static ssize_t _morse_msg_store(struct led_classdev *led_cdev,
const char *buf, size_t size)
{
struct morse_trig_data *morse_data = led_cdev->trigger_data;
char *m;
m = kmalloc(size, GFP_KERNEL);
if (!m)
return -ENOMEM;
memcpy(m,buf,size);
m[size]='\0';
if (morse_data->msg)
kfree(morse_data->msg);
morse_data->msg = m;
morse_data->msgpos = NULL;
morse_data->state = MORSE_STATE_BLINK_STOP;
mod_timer(&morse_data->timer, jiffies + 1);
return size;
}
#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,23)
static ssize_t morse_delay_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct led_classdev *led_cdev = dev_get_drvdata(dev);
return _morse_delay_show(led_cdev, buf);
}
static ssize_t morse_delay_store(struct device *dev,
struct device_attribute *attr, const char *buf, size_t size)
{
struct led_classdev *led_cdev = dev_get_drvdata(dev);
return _morse_delay_store(led_cdev, buf, size);
}
static ssize_t morse_msg_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct led_classdev *led_cdev = dev_get_drvdata(dev);
return _morse_msg_show(led_cdev, buf);
}
static ssize_t morse_msg_store(struct device *dev,
struct device_attribute *attr, const char *buf, size_t size)
{
struct led_classdev *led_cdev = dev_get_drvdata(dev);
return _morse_msg_store(led_cdev, buf, size);
}
static DEVICE_ATTR(delay, 0644, morse_delay_show, morse_delay_store);
static DEVICE_ATTR(message, 0644, morse_msg_show, morse_msg_store);
#define led_device_create_file(leddev, attr) \
device_create_file(leddev->dev, &dev_attr_ ## attr)
#define led_device_remove_file(leddev, attr) \
device_remove_file(leddev->dev, &dev_attr_ ## attr)
#else
static ssize_t morse_delay_show(struct class_device *dev, char *buf)
{
struct led_classdev *led_cdev = class_get_devdata(dev);
return _morse_delay_show(led_cdev, buf);
}
static ssize_t morse_delay_store(struct class_device *dev, const char *buf,
size_t size)
{
struct led_classdev *led_cdev = class_get_devdata(dev);
return _morse_delay_store(led_cdev, buf, size);
}
static ssize_t morse_msg_show(struct class_device *dev, char *buf)
{
struct led_classdev *led_cdev = class_get_devdata(dev);
return _morse_msg_show(led_cdev, buf);
}
static ssize_t morse_msg_store(struct class_device *dev, const char *buf,
size_t size)
{
struct led_classdev *led_cdev = class_get_devdata(dev);
return _morse_msg_store(led_cdev, buf, size);
}
static CLASS_DEVICE_ATTR(delay, 0644, morse_delay_show, morse_delay_store);
static CLASS_DEVICE_ATTR(message, 0644, morse_msg_show, morse_msg_store);
#define led_device_create_file(leddev, attr) \
class_device_create_file(leddev->class_dev, &class_device_attr_ ## attr)
#define led_device_remove_file(leddev, attr) \
class_device_remove_file(leddev->class_dev, &class_device_attr_ ## attr)
#endif
static void morse_trig_activate(struct led_classdev *led_cdev)
{
struct morse_trig_data *morse_data;
int rc;
morse_data = kzalloc(sizeof(*morse_data), GFP_KERNEL);
if (!morse_data)
return;
morse_data->delay = MORSE_DELAY_BASE;
init_timer(&morse_data->timer);
morse_data->timer.function = morse_timer_function;
morse_data->timer.data = (unsigned long)led_cdev;
rc = led_device_create_file(led_cdev, delay);
if (rc) goto err;
rc = led_device_create_file(led_cdev, message);
if (rc) goto err_delay;
led_cdev->trigger_data = morse_data;
return;
err_delay:
led_device_remove_file(led_cdev, delay);
err:
kfree(morse_data);
}
static void morse_trig_deactivate(struct led_classdev *led_cdev)
{
struct morse_trig_data *morse_data = led_cdev->trigger_data;
if (!morse_data)
return;
led_device_remove_file(led_cdev, message);
led_device_remove_file(led_cdev, delay);
del_timer_sync(&morse_data->timer);
if (morse_data->msg)
kfree(morse_data->msg);
kfree(morse_data);
}
static struct led_trigger morse_led_trigger = {
.name = "morse",
.activate = morse_trig_activate,
.deactivate = morse_trig_deactivate,
};
static int __init morse_trig_init(void)
{
return led_trigger_register(&morse_led_trigger);
}
static void __exit morse_trig_exit(void)
{
led_trigger_unregister(&morse_led_trigger);
}
module_init(morse_trig_init);
module_exit(morse_trig_exit);
MODULE_AUTHOR("Gabor Juhos <juhosg at openwrt.org>");
MODULE_DESCRIPTION("Morse LED trigger");
MODULE_LICENSE("GPL");

454
target/linux/generic-2.6/files-2.6.31/drivers/leds/ledtrig-netdev.c
Unescape View File

@ -0,0 +1,454 @@
/*
* LED Kernel Netdev Trigger
*
* Toggles the LED to reflect the link and traffic state of a named net device
*
* Copyright 2007 Oliver Jowett <oliver@opencloud.com>
*
* Derived from ledtrig-timer.c which is:
* Copyright 2005-2006 Openedhand Ltd.
* Author: Richard Purdie <rpurdie@openedhand.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
#include <linux/module.h>
#include <linux/jiffies.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/list.h>
#include <linux/spinlock.h>
#include <linux/device.h>
#include <linux/sysdev.h>
#include <linux/netdevice.h>
#include <linux/timer.h>
#include <linux/ctype.h>
#include <linux/leds.h>
#include <linux/version.h>
#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,26)
#include <net/net_namespace.h>
#endif
#include "leds.h"
/*
* Configurable sysfs attributes:
*
* device_name - network device name to monitor
*
* interval - duration of LED blink, in milliseconds
*
* mode - either "none" (LED is off) or a space separated list of one or more of:
* link: LED's normal state reflects whether the link is up (has carrier) or not
* tx: LED blinks on transmitted data
* rx: LED blinks on receive data
*
* Some suggestions:
*
* Simple link status LED:
* $ echo netdev >someled/trigger
* $ echo eth0 >someled/device_name
* $ echo link >someled/mode
*
* Ethernet-style link/activity LED:
* $ echo netdev >someled/trigger
* $ echo eth0 >someled/device_name
* $ echo "link tx rx" >someled/mode
*
* Modem-style tx/rx LEDs:
* $ echo netdev >led1/trigger
* $ echo ppp0 >led1/device_name
* $ echo tx >led1/mode
* $ echo netdev >led2/trigger
* $ echo ppp0 >led2/device_name
* $ echo rx >led2/mode
*
*/
#define MODE_LINK 1
#define MODE_TX 2
#define MODE_RX 4
struct led_netdev_data {
rwlock_t lock;
struct timer_list timer;
struct notifier_block notifier;
struct led_classdev *led_cdev;
struct net_device *net_dev;
char device_name[IFNAMSIZ];
unsigned interval;
unsigned mode;
unsigned link_up;
unsigned last_activity;
};
static void set_baseline_state(struct led_netdev_data *trigger_data)
{
if ((trigger_data->mode & MODE_LINK) != 0 && trigger_data->link_up)
led_set_brightness(trigger_data->led_cdev, LED_FULL);
else
led_set_brightness(trigger_data->led_cdev, LED_OFF);
if ((trigger_data->mode & (MODE_TX | MODE_RX)) != 0 && trigger_data->link_up)
mod_timer(&trigger_data->timer, jiffies + trigger_data->interval);
else
del_timer(&trigger_data->timer);
}
static ssize_t led_device_name_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct led_classdev *led_cdev = dev_get_drvdata(dev);
struct led_netdev_data *trigger_data = led_cdev->trigger_data;
read_lock(&trigger_data->lock);
sprintf(buf, "%s\n", trigger_data->device_name);
read_unlock(&trigger_data->lock);
return strlen(buf) + 1;
}
#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,21)
extern struct net init_net;
#endif
static ssize_t led_device_name_store(struct device *dev,
struct device_attribute *attr, const char *buf, size_t size)
{
struct led_classdev *led_cdev = dev_get_drvdata(dev);
struct led_netdev_data *trigger_data = led_cdev->trigger_data;
if (size < 0 || size >= IFNAMSIZ)
return -EINVAL;
write_lock(&trigger_data->lock);
strcpy(trigger_data->device_name, buf);
if (size > 0 && trigger_data->device_name[size-1] == '\n')
trigger_data->device_name[size-1] = 0;
if (trigger_data->device_name[0] != 0) {
/* check for existing device to update from */
#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,26)
trigger_data->net_dev = dev_get_by_name(&init_net, trigger_data->device_name);
#else
trigger_data->net_dev = dev_get_by_name(trigger_data->device_name);
#endif
if (trigger_data->net_dev != NULL)
trigger_data->link_up = (dev_get_flags(trigger_data->net_dev) & IFF_LOWER_UP) != 0;
set_baseline_state(trigger_data); /* updates LEDs, may start timers */
}
write_unlock(&trigger_data->lock);
return size;
}
static DEVICE_ATTR(device_name, 0644, led_device_name_show, led_device_name_store);
static ssize_t led_mode_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct led_classdev *led_cdev = dev_get_drvdata(dev);
struct led_netdev_data *trigger_data = led_cdev->trigger_data;
read_lock(&trigger_data->lock);
if (trigger_data->mode == 0) {
strcpy(buf, "none\n");
} else {
if (trigger_data->mode & MODE_LINK)
strcat(buf, "link ");
if (trigger_data->mode & MODE_TX)
strcat(buf, "tx ");
if (trigger_data->mode & MODE_RX)
strcat(buf, "rx ");
strcat(buf, "\n");
}
read_unlock(&trigger_data->lock);
return strlen(buf)+1;
}
static ssize_t led_mode_store(struct device *dev,
struct device_attribute *attr, const char *buf, size_t size)
{
struct led_classdev *led_cdev = dev_get_drvdata(dev);
struct led_netdev_data *trigger_data = led_cdev->trigger_data;
char copybuf[1024];
int new_mode = -1;
char *p, *token;
/* take a copy since we don't want to trash the inbound buffer when using strsep */
strncpy(copybuf, buf, sizeof(copybuf));
copybuf[1023] = 0;
p = copybuf;
while ((token = strsep(&p, " \t\n")) != NULL) {
if (!*token)
continue;
if (new_mode == -1)
new_mode = 0;
if (!strcmp(token, "none"))
new_mode = 0;
else if (!strcmp(token, "tx"))
new_mode |= MODE_TX;
else if (!strcmp(token, "rx"))
new_mode |= MODE_RX;
else if (!strcmp(token, "link"))
new_mode |= MODE_LINK;
else
return -EINVAL;
}
if (new_mode == -1)
return -EINVAL;
write_lock(&trigger_data->lock);
trigger_data->mode = new_mode;
set_baseline_state(trigger_data);
write_unlock(&trigger_data->lock);
return size;
}
static DEVICE_ATTR(mode, 0644, led_mode_show, led_mode_store);
static ssize_t led_interval_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct led_classdev *led_cdev = dev_get_drvdata(dev);
struct led_netdev_data *trigger_data = led_cdev->trigger_data;
read_lock(&trigger_data->lock);
sprintf(buf, "%u\n", jiffies_to_msecs(trigger_data->interval));
read_unlock(&trigger_data->lock);
return strlen(buf) + 1;
}
static ssize_t led_interval_store(struct device *dev,
struct device_attribute *attr, const char *buf, size_t size)
{
struct led_classdev *led_cdev = dev_get_drvdata(dev);
struct led_netdev_data *trigger_data = led_cdev->trigger_data;
int ret = -EINVAL;
char *after;
unsigned long value = simple_strtoul(buf, &after, 10);
size_t count = after - buf;
if (*after && isspace(*after))
count++;
/* impose some basic bounds on the timer interval */
if (count == size && value >= 5 && value <= 10000) {
write_lock(&trigger_data->lock);
trigger_data->interval = msecs_to_jiffies(value);
set_baseline_state(trigger_data); // resets timer
write_unlock(&trigger_data->lock);
ret = count;
}
return ret;
}
static DEVICE_ATTR(interval, 0644, led_interval_show, led_interval_store);
static int netdev_trig_notify(struct notifier_block *nb,
unsigned long evt,
void *dv)
{
struct net_device *dev = dv;
struct led_netdev_data *trigger_data = container_of(nb, struct led_netdev_data, notifier);
if (evt != NETDEV_UP && evt != NETDEV_DOWN && evt != NETDEV_CHANGE && evt != NETDEV_REGISTER && evt != NETDEV_UNREGISTER)
return NOTIFY_DONE;
write_lock(&trigger_data->lock);
if (strcmp(dev->name, trigger_data->device_name))
goto done;
if (evt == NETDEV_REGISTER) {
if (trigger_data->net_dev != NULL)
dev_put(trigger_data->net_dev);
dev_hold(dev);
trigger_data->net_dev = dev;
trigger_data->link_up = 0;
goto done;
}
if (evt == NETDEV_UNREGISTER && trigger_data->net_dev != NULL) {
dev_put(trigger_data->net_dev);
trigger_data->net_dev = NULL;
goto done;
}
/* UP / DOWN / CHANGE */
trigger_data->link_up = (evt != NETDEV_DOWN && netif_carrier_ok(dev));
set_baseline_state(trigger_data);
done:
write_unlock(&trigger_data->lock);
return NOTIFY_DONE;
}
/* here's the real work! */
static void netdev_trig_timer(unsigned long arg)
{
struct led_netdev_data *trigger_data = (struct led_netdev_data *)arg;
struct net_device_stats *dev_stats;
unsigned new_activity;
write_lock(&trigger_data->lock);
if (!trigger_data->link_up || !trigger_data->net_dev || (trigger_data->mode & (MODE_TX | MODE_RX)) == 0) {
/* we don't need to do timer work, just reflect link state. */
led_set_brightness(trigger_data->led_cdev, ((trigger_data->mode & MODE_LINK) != 0 && trigger_data->link_up) ? LED_FULL : LED_OFF);
goto no_restart;
}
#ifdef CONFIG_COMPAT_NET_DEV_OPS
dev_stats = trigger_data->net_dev->get_stats(trigger_data->net_dev);
#else
dev_stats = trigger_data->net_dev->netdev_ops->ndo_get_stats(trigger_data->net_dev);
#endif
new_activity =
((trigger_data->mode & MODE_TX) ? dev_stats->tx_packets : 0) +
((trigger_data->mode & MODE_RX) ? dev_stats->rx_packets : 0);
if (trigger_data->mode & MODE_LINK) {
/* base state is ON (link present) */
/* if there's no link, we don't get this far and the LED is off */
/* OFF -> ON always */
/* ON -> OFF on activity */
if (trigger_data->led_cdev->brightness == LED_OFF) {
led_set_brightness(trigger_data->led_cdev, LED_FULL);
} else if (trigger_data->last_activity != new_activity) {
led_set_brightness(trigger_data->led_cdev, LED_OFF);
}
} else {
/* base state is OFF */
/* ON -> OFF always */
/* OFF -> ON on activity */
if (trigger_data->led_cdev->brightness == LED_FULL) {
led_set_brightness(trigger_data->led_cdev, LED_OFF);
} else if (trigger_data->last_activity != new_activity) {
led_set_brightness(trigger_data->led_cdev, LED_FULL);
}
}
trigger_data->last_activity = new_activity;
mod_timer(&trigger_data->timer, jiffies + trigger_data->interval);
no_restart:
write_unlock(&trigger_data->lock);
}
static void netdev_trig_activate(struct led_classdev *led_cdev)
{
struct led_netdev_data *trigger_data;
int rc;
trigger_data = kzalloc(sizeof(struct led_netdev_data), GFP_KERNEL);
if (!trigger_data)
return;
rwlock_init(&trigger_data->lock);
trigger_data->notifier.notifier_call = netdev_trig_notify;
trigger_data->notifier.priority = 10;
setup_timer(&trigger_data->timer, netdev_trig_timer, (unsigned long) trigger_data);
trigger_data->led_cdev = led_cdev;
trigger_data->net_dev = NULL;
trigger_data->device_name[0] = 0;
trigger_data->mode = 0;
trigger_data->interval = msecs_to_jiffies(50);
trigger_data->link_up = 0;
trigger_data->last_activity = 0;
led_cdev->trigger_data = trigger_data;
rc = device_create_file(led_cdev->dev, &dev_attr_device_name);
if (rc)
goto err_out;
rc = device_create_file(led_cdev->dev, &dev_attr_mode);
if (rc)
goto err_out_device_name;
rc = device_create_file(led_cdev->dev, &dev_attr_interval);
if (rc)
goto err_out_mode;
register_netdevice_notifier(&trigger_data->notifier);
return;
err_out_mode:
device_remove_file(led_cdev->dev, &dev_attr_mode);
err_out_device_name:
device_remove_file(led_cdev->dev, &dev_attr_device_name);
err_out:
led_cdev->trigger_data = NULL;
kfree(trigger_data);
}
static void netdev_trig_deactivate(struct led_classdev *led_cdev)
{
struct led_netdev_data *trigger_data = led_cdev->trigger_data;
if (trigger_data) {
unregister_netdevice_notifier(&trigger_data->notifier);
device_remove_file(led_cdev->dev, &dev_attr_device_name);
device_remove_file(led_cdev->dev, &dev_attr_mode);
device_remove_file(led_cdev->dev, &dev_attr_interval);
write_lock(&trigger_data->lock);
if (trigger_data->net_dev) {
dev_put(trigger_data->net_dev);
trigger_data->net_dev = NULL;
}
write_unlock(&trigger_data->lock);
del_timer_sync(&trigger_data->timer);
kfree(trigger_data);
}
}
static struct led_trigger netdev_led_trigger = {
.name = "netdev",
.activate = netdev_trig_activate,
.deactivate = netdev_trig_deactivate,
};
static int __init netdev_trig_init(void)
{
return led_trigger_register(&netdev_led_trigger);
}
static void __exit netdev_trig_exit(void)
{
led_trigger_unregister(&netdev_led_trigger);
}
module_init(netdev_trig_init);
module_exit(netdev_trig_exit);
MODULE_AUTHOR("Oliver Jowett <oliver@opencloud.com>");
MODULE_DESCRIPTION("Netdev LED trigger");
MODULE_LICENSE("GPL");

651
target/linux/generic-2.6/files-2.6.31/drivers/net/phy/ar8216.c
Unescape View File

@ -0,0 +1,651 @@
/*
* ar8216.c: AR8216 switch driver
*
* Copyright (C) 2009 Felix Fietkau <nbd@openwrt.org>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/if.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/list.h>
#include <linux/if_ether.h>
#include <linux/skbuff.h>
#include <linux/netdevice.h>
#include <linux/netlink.h>
#include <linux/bitops.h>
#include <net/genetlink.h>
#include <linux/switch.h>
#include <linux/delay.h>
#include <linux/phy.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include "ar8216.h"
struct ar8216_priv {
struct switch_dev dev;
struct phy_device *phy;
u32 (*read)(struct ar8216_priv *priv, int reg);
void (*write)(struct ar8216_priv *priv, int reg, u32 val);
const struct net_device_ops *ndo_old;
struct net_device_ops ndo;
/* all fields below are cleared on reset */
bool vlan;
u8 vlan_id[AR8216_NUM_VLANS];
u8 vlan_table[AR8216_NUM_VLANS];
u8 vlan_tagged;
u16 pvid[AR8216_NUM_PORTS];
};
static struct switch_dev athdev;
#define to_ar8216(_dev) container_of(_dev, struct ar8216_priv, dev)
static inline void
split_addr(u32 regaddr, u16 *r1, u16 *r2, u16 *page)
{
regaddr >>= 1;
*r1 = regaddr & 0x1e;
regaddr >>= 5;
*r2 = regaddr & 0x7;
regaddr >>= 3;
*page = regaddr & 0x1ff;
}
static u32
ar8216_mii_read(struct ar8216_priv *priv, int reg)
{
struct phy_device *phy = priv->phy;
u16 r1, r2, page;
u16 lo, hi;
split_addr((u32) reg, &r1, &r2, &page);
phy->bus->write(phy->bus, 0x18, 0, page);
msleep(1); /* wait for the page switch to propagate */
lo = phy->bus->read(phy->bus, 0x10 | r2, r1);
hi = phy->bus->read(phy->bus, 0x10 | r2, r1 + 1);
return (hi << 16) | lo;
}
static void
ar8216_mii_write(struct ar8216_priv *priv, int reg, u32 val)
{
struct phy_device *phy = priv->phy;
u16 r1, r2, r3;
u16 lo, hi;
split_addr((u32) reg, &r1, &r2, &r3);
phy->bus->write(phy->bus, 0x18, 0, r3);
msleep(1); /* wait for the page switch to propagate */
lo = val & 0xffff;
hi = (u16) (val >> 16);
phy->bus->write(phy->bus, 0x10 | r2, r1 + 1, hi);
phy->bus->write(phy->bus, 0x10 | r2, r1, lo);
}
static u32
ar8216_rmw(struct ar8216_priv *priv, int reg, u32 mask, u32 val)
{
u32 v;
v = priv->read(priv, reg);
v &= ~mask;
v |= val;
priv->write(priv, reg, v);
return v;
}
static int
ar8216_set_vlan(struct switch_dev *dev, const struct switch_attr *attr,
struct switch_val *val)
{
struct ar8216_priv *priv = to_ar8216(dev);
priv->vlan = !!val->value.i;
return 0;
}
static int
ar8216_get_vlan(struct switch_dev *dev, const struct switch_attr *attr,
struct switch_val *val)
{
struct ar8216_priv *priv = to_ar8216(dev);
val->value.i = priv->vlan;
return 0;
}
static int
ar8216_set_pvid(struct switch_dev *dev, int port, int vlan)
{
struct ar8216_priv *priv = to_ar8216(dev);
priv->pvid[port] = vlan;
return 0;
}
static int
ar8216_get_pvid(struct switch_dev *dev, int port, int *vlan)
{
struct ar8216_priv *priv = to_ar8216(dev);
*vlan = priv->pvid[port];
return 0;
}
static int
ar8216_set_vid(struct switch_dev *dev, const struct switch_attr *attr,
struct switch_val *val)
{
struct ar8216_priv *priv = to_ar8216(dev);
priv->vlan_id[val->port_vlan] = val->value.i;
return 0;
}
static int
ar8216_get_vid(struct switch_dev *dev, const struct switch_attr *attr,
struct switch_val *val)
{
struct ar8216_priv *priv = to_ar8216(dev);
val->value.i = priv->vlan_id[val->port_vlan];
return 0;
}
static int
ar8216_mangle_tx(struct sk_buff *skb, struct net_device *dev)
{
struct ar8216_priv *priv = dev->phy_ptr;
unsigned char *buf;
if (unlikely(!priv))
goto error;
if (!priv->vlan)
goto send;
if (unlikely(skb_headroom(skb) < 2)) {
if (pskb_expand_head(skb, 2, 0, GFP_ATOMIC) < 0)
goto error;
}
buf = skb_push(skb, 2);
buf[0] = 0x10;
buf[1] = 0x80;
send:
return priv->ndo_old->ndo_start_xmit(skb, dev);
error:
dev_kfree_skb_any(skb);
return 0;
}
static int
ar8216_mangle_rx(struct sk_buff *skb, int napi)
{
struct ar8216_priv *priv;
struct net_device *dev;
unsigned char *buf;
int port, vlan;
dev = skb->dev;
if (!dev)
goto error;
priv = dev->phy_ptr;
if (!priv)
goto error;
/* don't strip the header if vlan mode is disabled */
if (!priv->vlan)
goto recv;
/* strip header, get vlan id */
buf = skb->data;
skb_pull(skb, 2);
/* check for vlan header presence */
if ((buf[12 + 2] != 0x81) || (buf[13 + 2] != 0x00))
goto recv;
port = buf[0] & 0xf;
/* no need to fix up packets coming from a tagged source */
if (priv->vlan_tagged & (1 << port))
goto recv;
/* lookup port vid from local table, the switch passes an invalid vlan id */
vlan = priv->pvid[port];
buf[14 + 2] &= 0xf0;
buf[14 + 2] |= vlan >> 8;
buf[15 + 2] = vlan & 0xff;
recv:
skb->protocol = eth_type_trans(skb, skb->dev);
if (napi)
return netif_receive_skb(skb);
else
return netif_rx(skb);
error:
/* no vlan? eat the packet! */
dev_kfree_skb_any(skb);
return 0;
}
static int
ar8216_netif_rx(struct sk_buff *skb)
{
return ar8216_mangle_rx(skb, 0);
}
static int
ar8216_netif_receive_skb(struct sk_buff *skb)
{
return ar8216_mangle_rx(skb, 1);
}
static struct switch_attr ar8216_globals[] = {
{
.type = SWITCH_TYPE_INT,
.name = "enable_vlan",
.description = "Enable VLAN mode",
.set = ar8216_set_vlan,
.get = ar8216_get_vlan,
.max = 1
},
};
static struct switch_attr ar8216_port[] = {
};
static struct switch_attr ar8216_vlan[] = {
{
.type = SWITCH_TYPE_INT,
.name = "pvid",
.description = "VLAN ID",
.set = ar8216_set_vid,
.get = ar8216_get_vid,
.max = 4095,
},
};
static int
ar8216_get_ports(struct switch_dev *dev, struct switch_val *val)
{
struct ar8216_priv *priv = to_ar8216(dev);
u8 ports = priv->vlan_table[val->port_vlan];
int i;
val->len = 0;
for (i = 0; i < AR8216_NUM_PORTS; i++) {
struct switch_port *p;
if (!(ports & (1 << i)))
continue;
p = &val->value.ports[val->len++];
p->id = i;
if (priv->vlan_tagged & (1 << i))
p->flags = (1 << SWITCH_PORT_FLAG_TAGGED);
else
p->flags = 0;
}
return 0;
}
static int
ar8216_set_ports(struct switch_dev *dev, struct switch_val *val)
{
struct ar8216_priv *priv = to_ar8216(dev);
u8 *vt = &priv->vlan_table[val->port_vlan];
int i, j;
*vt = 0;
for (i = 0; i < val->len; i++) {
struct switch_port *p = &val->value.ports[i];
if (p->flags & (1 << SWITCH_PORT_FLAG_TAGGED))
priv->vlan_tagged |= (1 << p->id);
else {
priv->vlan_tagged &= ~(1 << p->id);
priv->pvid[p->id] = val->port_vlan;
/* make sure that an untagged port does not
* appear in other vlans */
for (j = 0; j < AR8216_NUM_VLANS; j++) {
if (j == val->port_vlan)
continue;
priv->vlan_table[j] &= ~(1 << p->id);
}
}
*vt |= 1 << p->id;
}
return 0;
}
static int
ar8216_wait_bit(struct ar8216_priv *priv, int reg, u32 mask, u32 val)
{
int timeout = 20;
while ((priv->read(priv, reg) & mask) != val) {
if (timeout-- <= 0) {
printk(KERN_ERR "ar8216: timeout waiting for operation to complete\n");
return 1;
}
}
return 0;
}
static void
ar8216_vtu_op(struct ar8216_priv *priv, u32 op, u32 val)
{
if (ar8216_wait_bit(priv, AR8216_REG_VTU, AR8216_VTU_ACTIVE, 0))
return;
if ((op & AR8216_VTU_OP) == AR8216_VTU_OP_LOAD) {
val &= AR8216_VTUDATA_MEMBER;
val |= AR8216_VTUDATA_VALID;
priv->write(priv, AR8216_REG_VTU_DATA, val);
}
op |= AR8216_VTU_ACTIVE;
priv->write(priv, AR8216_REG_VTU, op);
}
static int
ar8216_hw_apply(struct switch_dev *dev)
{
struct ar8216_priv *priv = to_ar8216(dev);
u8 portmask[AR8216_NUM_PORTS];
int i, j;
/* flush all vlan translation unit entries */
ar8216_vtu_op(priv, AR8216_VTU_OP_FLUSH, 0);
memset(portmask, 0, sizeof(portmask));
if (priv->vlan) {
/* calculate the port destination masks and load vlans
* into the vlan translation unit */
for (j = 0; j < AR8216_NUM_VLANS; j++) {
u8 vp = priv->vlan_table[j];
if (!vp)
continue;
for (i = 0; i < AR8216_NUM_PORTS; i++) {
u8 mask = (1 << i);
if (vp & mask)
portmask[i] |= vp & ~mask;
}
if (!priv->vlan_table[j])
continue;
ar8216_vtu_op(priv,
AR8216_VTU_OP_LOAD |
(priv->vlan_id[j] << AR8216_VTU_VID_S),
priv->vlan_table[j]);
}
} else {
/* vlan disabled:
* isolate all ports, but connect them to the cpu port */
for (i = 0; i < AR8216_NUM_PORTS; i++) {
if (i == AR8216_PORT_CPU)
continue;
portmask[i] = 1 << AR8216_PORT_CPU;
portmask[AR8216_PORT_CPU] |= (1 << i);
}
}
/* update the port destination mask registers and tag settings */
for (i = 0; i < AR8216_NUM_PORTS; i++) {
int egress, ingress;
int pvid;
if (priv->vlan) {
pvid = priv->vlan_id[priv->pvid[i]];
} else {
pvid = i;
}
if (priv->vlan && (priv->vlan_tagged & (1 << i))) {
egress = AR8216_OUT_ADD_VLAN;
} else {
egress = AR8216_OUT_STRIP_VLAN;
}
ingress = AR8216_IN_SECURE;
ar8216_rmw(priv, AR8216_REG_PORT_CTRL(i),
AR8216_PORT_CTRL_LEARN | AR8216_PORT_CTRL_VLAN_MODE |
AR8216_PORT_CTRL_SINGLE_VLAN | AR8216_PORT_CTRL_STATE |
AR8216_PORT_CTRL_HEADER | AR8216_PORT_CTRL_LEARN_LOCK,
AR8216_PORT_CTRL_LEARN |
(priv->vlan && i == AR8216_PORT_CPU ?
AR8216_PORT_CTRL_HEADER : 0) |
(egress << AR8216_PORT_CTRL_VLAN_MODE_S) |
(AR8216_PORT_STATE_FORWARD << AR8216_PORT_CTRL_STATE_S));
ar8216_rmw(priv, AR8216_REG_PORT_VLAN(i),
AR8216_PORT_VLAN_DEST_PORTS | AR8216_PORT_VLAN_MODE |
AR8216_PORT_VLAN_DEFAULT_ID,
(portmask[i] << AR8216_PORT_VLAN_DEST_PORTS_S) |
(ingress << AR8216_PORT_VLAN_MODE_S) |
(pvid << AR8216_PORT_VLAN_DEFAULT_ID_S));
}
return 0;
}
static int
ar8216_reset_switch(struct switch_dev *dev)
{
struct ar8216_priv *priv = to_ar8216(dev);
int i;
memset(&priv->vlan, 0, sizeof(struct ar8216_priv) -
offsetof(struct ar8216_priv, vlan));
for (i = 0; i < AR8216_NUM_VLANS; i++) {
priv->vlan_id[i] = i;
}
for (i = 0; i < AR8216_NUM_PORTS; i++) {
/* Enable port learning and tx */
priv->write(priv, AR8216_REG_PORT_CTRL(i),
AR8216_PORT_CTRL_LEARN |
(4 << AR8216_PORT_CTRL_STATE_S));
priv->write(priv, AR8216_REG_PORT_VLAN(i), 0);
/* Configure all PHYs */
if (i == AR8216_PORT_CPU) {
priv->write(priv, AR8216_REG_PORT_STATUS(i),
AR8216_PORT_STATUS_LINK_UP |
AR8216_PORT_STATUS_SPEED |
AR8216_PORT_STATUS_TXMAC |
AR8216_PORT_STATUS_RXMAC |
AR8216_PORT_STATUS_DUPLEX);
} else {
priv->write(priv, AR8216_REG_PORT_STATUS(i),
AR8216_PORT_STATUS_LINK_AUTO);
}
}
/* XXX: undocumented magic from atheros, required! */
priv->write(priv, 0x38, 0xc000050e);
ar8216_rmw(priv, AR8216_REG_GLOBAL_CTRL,
AR8216_GCTRL_MTU, 1518 + 8 + 2);
return ar8216_hw_apply(dev);
}
static int
ar8216_config_init(struct phy_device *pdev)
{
struct ar8216_priv *priv;
struct net_device *dev = pdev->attached_dev;
int ret;
printk("%s: AR8216 PHY driver attached.\n", pdev->attached_dev->name);
pdev->supported = ADVERTISED_100baseT_Full;
pdev->advertising = ADVERTISED_100baseT_Full;
priv = kzalloc(sizeof(struct ar8216_priv), GFP_KERNEL);
if (priv == NULL)
return -ENOMEM;
priv->phy = pdev;
priv->read = ar8216_mii_read;
priv->write = ar8216_mii_write;
memcpy(&priv->dev, &athdev, sizeof(struct switch_dev));
pdev->priv = priv;
if ((ret = register_switch(&priv->dev, pdev->attached_dev)) < 0) {
kfree(priv);
goto done;
}
ret = ar8216_reset_switch(&priv->dev);
if (ret)
goto done;
dev->phy_ptr = priv;
pdev->pkt_align = 2;
pdev->netif_receive_skb = ar8216_netif_receive_skb;
pdev->netif_rx = ar8216_netif_rx;
priv->ndo_old = dev->netdev_ops;
memcpy(&priv->ndo, priv->ndo_old, sizeof(struct net_device_ops));
priv->ndo.ndo_start_xmit = ar8216_mangle_tx;
dev->netdev_ops = &priv->ndo;
done:
return ret;
}
static int
ar8216_read_status(struct phy_device *phydev)
{
struct ar8216_priv *priv = phydev->priv;
phydev->speed = SPEED_100;
phydev->duplex = DUPLEX_FULL;
phydev->state = PHY_UP;
/* flush the address translation unit */
if (ar8216_wait_bit(priv, AR8216_REG_ATU, AR8216_ATU_ACTIVE, 0))
return -ETIMEDOUT;
priv->write(priv, AR8216_REG_ATU, AR8216_ATU_OP_FLUSH);
return 0;
}
static int
ar8216_config_aneg(struct phy_device *phydev)
{
return 0;
}
static int
ar8216_probe(struct phy_device *pdev)
{
struct ar8216_priv priv;
u8 id, rev;
u32 val;
priv.phy = pdev;
val = ar8216_mii_read(&priv, AR8216_REG_CTRL);
rev = val & 0xff;
id = (val >> 8) & 0xff;
if ((id != 1) || (rev != 1))
return -ENODEV;
return 0;
}
static void
ar8216_remove(struct phy_device *pdev)
{
struct ar8216_priv *priv = pdev->priv;
struct net_device *dev = pdev->attached_dev;
if (!priv)
return;
if (priv->ndo_old && dev)
dev->netdev_ops = priv->ndo_old;
unregister_switch(&priv->dev);
kfree(priv);
}
/* template */
static struct switch_dev athdev = {
.name = "Atheros AR8216",
.cpu_port = AR8216_PORT_CPU,
.ports = AR8216_NUM_PORTS,
.vlans = AR8216_NUM_VLANS,
.attr_global = {
.attr = ar8216_globals,
.n_attr = ARRAY_SIZE(ar8216_globals),
},
.attr_port = {
.attr = ar8216_port,
.n_attr = ARRAY_SIZE(ar8216_port),
},
.attr_vlan = {
.attr = ar8216_vlan,
.n_attr = ARRAY_SIZE(ar8216_vlan),
},
.get_port_pvid = ar8216_get_pvid,
.set_port_pvid = ar8216_set_pvid,
.get_vlan_ports = ar8216_get_ports,
.set_vlan_ports = ar8216_set_ports,
.apply_config = ar8216_hw_apply,
.reset_switch = ar8216_reset_switch,
};
static struct phy_driver ar8216_driver = {
.name = "Atheros AR8216",
.features = PHY_BASIC_FEATURES,
.probe = ar8216_probe,
.remove = ar8216_remove,
.config_init = &ar8216_config_init,
.config_aneg = &ar8216_config_aneg,
.read_status = &ar8216_read_status,
.driver = { .owner = THIS_MODULE },
};
int __init
ar8216_init(void)
{
return phy_driver_register(&ar8216_driver);
}
void __exit
ar8216_exit(void)
{
phy_driver_unregister(&ar8216_driver);
}
module_init(ar8216_init);
module_exit(ar8216_exit);
MODULE_LICENSE("GPL");

467
target/linux/generic-2.6/files-2.6.31/drivers/net/phy/mvswitch.c
Unescape View File

@ -0,0 +1,467 @@
/*
* Marvell 88E6060 switch driver
* Copyright (c) 2008 Felix Fietkau <nbd@openwrt.org>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License v2 as published by the
* Free Software Foundation
*/
#include <linux/kernel.h>
#include <linux/string.h>
#include <linux/errno.h>
#include <linux/unistd.h>
#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/skbuff.h>
#include <linux/spinlock.h>
#include <linux/mm.h>
#include <linux/module.h>
#include <linux/mii.h>
#include <linux/ethtool.h>
#include <linux/phy.h>
#include <linux/if_vlan.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/uaccess.h>
#include "mvswitch.h"
/* Undefine this to use trailer mode instead.
* I don't know if header mode works with all chips */
#define HEADER_MODE 1
MODULE_DESCRIPTION("Marvell 88E6060 Switch driver");
MODULE_AUTHOR("Felix Fietkau");
MODULE_LICENSE("GPL");
#define MVSWITCH_MAGIC 0x88E6060
struct mvswitch_priv {
const struct net_device_ops *ndo_old;
struct net_device_ops ndo;
struct vlan_group *grp;
u8 vlans[16];
};
#define to_mvsw(_phy) ((struct mvswitch_priv *) (_phy)->priv)
static inline u16
r16(struct phy_device *phydev, int addr, int reg)
{
return phydev->bus->read(phydev->bus, addr, reg);
}
static inline void
w16(struct phy_device *phydev, int addr, int reg, u16 val)
{
phydev->bus->write(phydev->bus, addr, reg, val);
}
static int
mvswitch_mangle_tx(struct sk_buff *skb, struct net_device *dev)
{
struct mvswitch_priv *priv;
char *buf = NULL;
u16 vid;
priv = dev->phy_ptr;
if (unlikely(!priv))
goto error;
if (unlikely(skb->len < 16))
goto error;
#ifdef HEADER_MODE
if (__vlan_hwaccel_get_tag(skb, &vid))
goto error;
if (skb_cloned(skb) || (skb->len <= 62) || (skb_headroom(skb) < MV_HEADER_SIZE)) {
if (pskb_expand_head(skb, MV_HEADER_SIZE, (skb->len < 62 ? 62 - skb->len : 0), GFP_ATOMIC))
goto error_expand;
if (skb->len < 62)
skb->len = 62;
}
buf = skb_push(skb, MV_HEADER_SIZE);
#else
if (__vlan_get_tag(skb, &vid))
goto error;
if (unlikely((vid > 15 || !priv->vlans[vid])))
goto error;
if (skb->len <= 64) {
if (pskb_expand_head(skb, 0, 64 + MV_TRAILER_SIZE - skb->len, GFP_ATOMIC))
goto error_expand;
buf = skb->data + 64;
skb->len = 64 + MV_TRAILER_SIZE;
} else {
if (skb_cloned(skb) || unlikely(skb_tailroom(skb) < 4)) {
if (pskb_expand_head(skb, 0, 4, GFP_ATOMIC))
goto error_expand;
}
buf = skb_put(skb, 4);
}
/* move the ethernet header 4 bytes forward, overwriting the vlan tag */
memmove(skb->data + 4, skb->data, 12);
skb->data += 4;
skb->len -= 4;
skb->mac_header += 4;
#endif
if (!buf)
goto error;
#ifdef HEADER_MODE
/* prepend the tag */
*((__be16 *) buf) = cpu_to_be16(
((vid << MV_HEADER_VLAN_S) & MV_HEADER_VLAN_M) |
((priv->vlans[vid] << MV_HEADER_PORTS_S) & MV_HEADER_PORTS_M)
);
#else
/* append the tag */
*((__be32 *) buf) = cpu_to_be32((
(MV_TRAILER_OVERRIDE << MV_TRAILER_FLAGS_S) |
((priv->vlans[vid] & MV_TRAILER_PORTS_M) << MV_TRAILER_PORTS_S)
));
#endif
return priv->ndo_old->ndo_start_xmit(skb, dev);
error_expand:
if (net_ratelimit())
printk("%s: failed to expand/update skb for the switch\n", dev->name);
error:
/* any errors? drop the packet! */
dev_kfree_skb_any(skb);
return 0;
}
static int
mvswitch_mangle_rx(struct sk_buff *skb, int napi)
{
struct mvswitch_priv *priv;
struct net_device *dev;
int vlan = -1;
unsigned char *buf;
int i;
dev = skb->dev;
if (!dev)
goto error;
priv = dev->phy_ptr;
if (!priv)
goto error;
if (!priv->grp)
goto error;
#ifdef HEADER_MODE
buf = skb->data;
skb_pull(skb, MV_HEADER_SIZE);
#else
buf = skb->data + skb->len - MV_TRAILER_SIZE;
if (buf[0] != 0x80)
goto error;
#endif
/* look for the vlan matching the incoming port */
for (i = 0; i < ARRAY_SIZE(priv->vlans); i++) {
if ((1 << buf[1]) & priv->vlans[i])
vlan = i;
}
if (vlan == -1)
goto error;
skb->protocol = eth_type_trans(skb, skb->dev);
if (napi)
return vlan_hwaccel_receive_skb(skb, priv->grp, vlan);
else
return vlan_hwaccel_rx(skb, priv->grp, vlan);
error:
/* no vlan? eat the packet! */
dev_kfree_skb_any(skb);
return 0;
}
static int
mvswitch_netif_rx(struct sk_buff *skb)
{
return mvswitch_mangle_rx(skb, 0);
}
static int
mvswitch_netif_receive_skb(struct sk_buff *skb)
{
return mvswitch_mangle_rx(skb, 1);
}
static void
mvswitch_vlan_rx_register(struct net_device *dev, struct vlan_group *grp)
{
struct mvswitch_priv *priv = dev->phy_ptr;
priv->grp = grp;
}
static int
mvswitch_wait_mask(struct phy_device *pdev, int addr, int reg, u16 mask, u16 val)
{
int i = 100;
u16 r;
do {
r = r16(pdev, addr, reg) & mask;
if (r == val)
return 0;
} while(--i > 0);
return -ETIMEDOUT;
}
static int
mvswitch_config_init(struct phy_device *pdev)
{
struct mvswitch_priv *priv = to_mvsw(pdev);
struct net_device *dev = pdev->attached_dev;
u8 vlmap = 0;
int i;
if (!dev)
return -EINVAL;
printk("%s: Marvell 88E6060 PHY driver attached.\n", dev->name);
pdev->supported = ADVERTISED_100baseT_Full;
pdev->advertising = ADVERTISED_100baseT_Full;
dev->phy_ptr = priv;
dev->irq = PHY_POLL;
/* initialize default vlans */
for (i = 0; i < MV_PORTS; i++)
priv->vlans[(i == MV_WANPORT ? 2 : 1)] |= (1 << i);
/* before entering reset, disable all ports */
for (i = 0; i < MV_PORTS; i++)
w16(pdev, MV_PORTREG(CONTROL, i), 0x00);
msleep(2); /* wait for the status change to settle in */
/* put the ATU in reset */
w16(pdev, MV_SWITCHREG(ATU_CTRL), MV_ATUCTL_RESET);
i = mvswitch_wait_mask(pdev, MV_SWITCHREG(ATU_CTRL), MV_ATUCTL_RESET, 0);
if (i < 0) {
printk("%s: Timeout waiting for the switch to reset.\n", dev->name);
return i;
}
/* set the ATU flags */
w16(pdev, MV_SWITCHREG(ATU_CTRL),
MV_ATUCTL_NO_LEARN |
MV_ATUCTL_ATU_1K |
MV_ATUCTL_AGETIME(MV_ATUCTL_AGETIME_MIN) /* minimum without disabling ageing */
);
/* initialize the cpu port */
w16(pdev, MV_PORTREG(CONTROL, MV_CPUPORT),
#ifdef HEADER_MODE
MV_PORTCTRL_HEADER |
#else
MV_PORTCTRL_RXTR |
MV_PORTCTRL_TXTR |
#endif
MV_PORTCTRL_ENABLED
);
/* wait for the phy change to settle in */
msleep(2);
for (i = 0; i < MV_PORTS; i++) {
u8 pvid = 0;
int j;
vlmap = 0;
/* look for the matching vlan */
for (j = 0; j < ARRAY_SIZE(priv->vlans); j++) {
if (priv->vlans[j] & (1 << i)) {
vlmap = priv->vlans[j];
pvid = j;
}
}
/* leave port unconfigured if it's not part of a vlan */
if (!vlmap)
continue;
/* add the cpu port to the allowed destinations list */
vlmap |= (1 << MV_CPUPORT);
/* take port out of its own vlan destination map */
vlmap &= ~(1 << i);
/* apply vlan settings */
w16(pdev, MV_PORTREG(VLANMAP, i),
MV_PORTVLAN_PORTS(vlmap) |
MV_PORTVLAN_ID(i)
);
/* re-enable port */
w16(pdev, MV_PORTREG(CONTROL, i),
MV_PORTCTRL_ENABLED
);
}
w16(pdev, MV_PORTREG(VLANMAP, MV_CPUPORT),
MV_PORTVLAN_ID(MV_CPUPORT)
);
/* set the port association vector */
for (i = 0; i <= MV_PORTS; i++) {
w16(pdev, MV_PORTREG(ASSOC, i),
MV_PORTASSOC_PORTS(1 << i)
);
}
/* init switch control */
w16(pdev, MV_SWITCHREG(CTRL),
MV_SWITCHCTL_MSIZE |
MV_SWITCHCTL_DROP
);
/* hook into the tx function */
priv->ndo_old = dev->netdev_ops;
memcpy(&priv->ndo, priv->ndo_old, sizeof(struct net_device_ops));
priv->ndo.ndo_start_xmit = mvswitch_mangle_tx;
priv->ndo.ndo_vlan_rx_register = mvswitch_vlan_rx_register;
dev->netdev_ops = &priv->ndo;
pdev->pkt_align = 2;
pdev->netif_receive_skb = mvswitch_netif_receive_skb;
pdev->netif_rx = mvswitch_netif_rx;
#ifdef HEADER_MODE
dev->features |= NETIF_F_HW_VLAN_RX | NETIF_F_HW_VLAN_TX;
#else
dev->features |= NETIF_F_HW_VLAN_RX;
#endif
return 0;
}
static int
mvswitch_read_status(struct phy_device *pdev)
{
pdev->speed = SPEED_100;
pdev->duplex = DUPLEX_FULL;
pdev->state = PHY_UP;
/* XXX ugly workaround: we can't force the switch
* to gracefully handle hosts moving from one port to another,
* so we have to regularly clear the ATU database */
/* wait for the ATU to become available */
mvswitch_wait_mask(pdev, MV_SWITCHREG(ATU_OP), MV_ATUOP_INPROGRESS, 0);
/* flush the ATU */
w16(pdev, MV_SWITCHREG(ATU_OP),
MV_ATUOP_INPROGRESS |
MV_ATUOP_FLUSH_ALL
);
/* wait for operation to complete */
mvswitch_wait_mask(pdev, MV_SWITCHREG(ATU_OP), MV_ATUOP_INPROGRESS, 0);
return 0;
}
static int
mvswitch_config_aneg(struct phy_device *phydev)
{
return 0;
}
static void
mvswitch_remove(struct phy_device *pdev)
{
struct mvswitch_priv *priv = to_mvsw(pdev);
struct net_device *dev = pdev->attached_dev;
/* restore old netdev ops */
if (priv->ndo_old && dev)
dev->netdev_ops = priv->ndo_old;
dev->vlan_rx_register = NULL;
dev->vlan_rx_kill_vid = NULL;
dev->phy_ptr = NULL;
dev->features &= ~NETIF_F_HW_VLAN_RX;
kfree(priv);
}
static int
mvswitch_probe(struct phy_device *pdev)
{
struct mvswitch_priv *priv;
priv = kzalloc(sizeof(struct mvswitch_priv), GFP_KERNEL);
if (priv == NULL)
return -ENOMEM;
pdev->priv = priv;
return 0;
}
static int
mvswitch_fixup(struct phy_device *dev)
{
u16 reg;
if (dev->addr != 0x10)
return 0;
reg = dev->bus->read(dev->bus, MV_PORTREG(IDENT, 0)) & MV_IDENT_MASK;
if (reg != MV_IDENT_VALUE)
return 0;
dev->phy_id = MVSWITCH_MAGIC;
return 0;
}
static struct phy_driver mvswitch_driver = {
.name = "Marvell 88E6060",
.phy_id = MVSWITCH_MAGIC,
.phy_id_mask = 0xffffffff,
.features = PHY_BASIC_FEATURES,
.probe = &mvswitch_probe,
.remove = &mvswitch_remove,
.config_init = &mvswitch_config_init,
.config_aneg = &mvswitch_config_aneg,
.read_status = &mvswitch_read_status,
.driver = { .owner = THIS_MODULE,},
};
static int __init
mvswitch_init(void)
{
phy_register_fixup_for_id(PHY_ANY_ID, mvswitch_fixup);
return phy_driver_register(&mvswitch_driver);
}
static void __exit
mvswitch_exit(void)
{
phy_driver_unregister(&mvswitch_driver);
}
module_init(mvswitch_init);
module_exit(mvswitch_exit);

27
target/linux/generic-2.6/files-2.6.31/include/linux/glamo-engine.h
Unescape View File

@ -0,0 +1,27 @@
#ifndef __GLAMO_ENGINE_H
#define __GLAMO_ENGINE_H
enum glamo_engine {
GLAMO_ENGINE_CAPTURE = 0,
GLAMO_ENGINE_ISP = 1,
GLAMO_ENGINE_JPEG = 2,
GLAMO_ENGINE_MPEG_ENC = 3,
GLAMO_ENGINE_MPEG_DEC = 4,
GLAMO_ENGINE_LCD = 5,
GLAMO_ENGINE_CMDQ = 6,
GLAMO_ENGINE_2D = 7,
GLAMO_ENGINE_3D = 8,
GLAMO_ENGINE_MMC = 9,
GLAMO_ENGINE_MICROP0 = 10,
GLAMO_ENGINE_RISC = 11,
GLAMO_ENGINE_MICROP1_MPEG_ENC = 12,
GLAMO_ENGINE_MICROP1_MPEG_DEC = 13,
#if 0
GLAMO_ENGINE_H264_DEC = 14,
GLAMO_ENGINE_RISC1 = 15,
GLAMO_ENGINE_SPI = 16,
#endif
__NUM_GLAMO_ENGINES
};
#endif

35
target/linux/generic-2.6/files-2.6.31/include/linux/glamofb.h
Unescape View File

@ -0,0 +1,35 @@
#ifndef _LINUX_GLAMOFB_H
#define _LINUX_GLAMOFB_H
#include <linux/fb.h>
#ifdef __KERNEL__
struct glamo_core;
struct glamofb_handle;
struct glamo_fb_platform_data {
int width, height;
int num_modes;
struct fb_videomode *modes;
struct glamo_core *core;
};
int glamofb_cmd_mode(struct glamofb_handle *gfb, int on);
int glamofb_cmd_write(struct glamofb_handle *gfb, u_int16_t val);
#ifdef CONFIG_MFD_GLAMO
void glamo_lcm_reset(struct platform_device *pdev, int level);
#else
#define glamo_lcm_reset(...) do {} while (0)
#endif
#endif
#define GLAMOFB_ENGINE_ENABLE _IOW('F', 0x1, __u32)
#define GLAMOFB_ENGINE_DISABLE _IOW('F', 0x2, __u32)
#define GLAMOFB_ENGINE_RESET _IOW('F', 0x3, __u32)
#endif

35
target/linux/generic-2.6/files-2.6.31/include/linux/gpio_buttons.h
Unescape View File

@ -0,0 +1,35 @@
/*
* Definitions for the GPIO buttons interface driver
*
* Copyright (C) 2007,2008 Gabor Juhos <juhosg at openwrt.org>
*
* This file was based on: /include/linux/gpio_keys.h
* The original gpio_keys.h seems not to have a license.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
#ifndef _GPIO_BUTTONS_H_
#define _GPIO_BUTTONS_H_
struct gpio_button {
int gpio; /* GPIO line number */
int active_low;
char *desc; /* button description */
int type; /* input event type (EV_KEY, EV_SW) */
int code; /* input event code (KEY_*, SW_*) */
int count;
int threshold; /* count threshold */
};
struct gpio_buttons_platform_data {
struct gpio_button *buttons;
int nbuttons; /* number of buttons */
int poll_interval; /* polling interval */
};
#endif /* _GPIO_BUTTONS_H_ */

11
target/linux/generic-2.6/files-2.6.31/include/linux/gpio_dev.h
Unescape View File

@ -0,0 +1,11 @@
#ifndef _GPIODEV_H__
#define _GPIODEV_H__
#define IOC_GPIODEV_MAGIC 'B'
#define GPIO_GET _IO(IOC_GPIODEV_MAGIC, 10)
#define GPIO_SET _IO(IOC_GPIODEV_MAGIC, 11)
#define GPIO_CLEAR _IO(IOC_GPIODEV_MAGIC, 12)
#define GPIO_DIR_IN _IO(IOC_GPIODEV_MAGIC, 13)
#define GPIO_DIR_OUT _IO(IOC_GPIODEV_MAGIC, 14)
#endif
Write Preview
Loading…
Cancel
Save