orion: add 3.3 support

SVN-Revision: 31528
master
Gabor Juhos 13 years ago
parent 923ebbac81
commit f687ca2296
  1. 190
      target/linux/orion/config-3.3
  2. 47
      target/linux/orion/dns323/config-3.3
  3. 28
      target/linux/orion/harddisk/config-3.3
  4. 32
      target/linux/orion/patches-3.3/100-wrt350nv2_openwrt_partition_map.patch
  5. 13
      target/linux/orion/patches-3.3/101-wnr854t_partition_map.patch
  6. 26
      target/linux/orion/patches-3.3/200-dt2_board_support.patch
  7. 30
      target/linux/orion/patches-3.3/300-dns323_partition_map.patch
  8. 31
      target/linux/orion/patches-3.3/400-fix-section-mismatch-warnings.patch
  9. 34
      target/linux/orion/patches-3.3/a01-dt2-fixes-for-3.3.patch

@ -0,0 +1,190 @@
CONFIG_ALIGNMENT_TRAP=y
CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_ARCH_NR_GPIO=0
CONFIG_ARCH_ORION5X=y
# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
CONFIG_ARCH_REQUIRE_GPIOLIB=y
# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
# CONFIG_ARCH_SUPPORTS_MSI is not set
# CONFIG_ARCH_USES_GETTIMEOFFSET is not set
CONFIG_ARM=y
# CONFIG_ARM_CPU_SUSPEND is not set
CONFIG_ARM_L1_CACHE_SHIFT=5
CONFIG_ARM_NR_BANKS=8
CONFIG_ARM_PATCH_PHYS_VIRT=y
# CONFIG_ARM_THUMB is not set
# CONFIG_ARPD is not set
CONFIG_ATA=m
CONFIG_BCMA_POSSIBLE=y
# CONFIG_CACHE_L2X0 is not set
CONFIG_CLKSRC_MMIO=y
CONFIG_CMDLINE="root=/dev/mtdblock1 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200"
CONFIG_CMDLINE_FORCE=y
CONFIG_CPU_32v5=y
CONFIG_CPU_ABRT_EV5T=y
CONFIG_CPU_CACHE_VIVT=y
CONFIG_CPU_COPY_FEROCEON=y
CONFIG_CPU_CP15=y
CONFIG_CPU_CP15_MMU=y
CONFIG_CPU_FEROCEON=y
CONFIG_CPU_FEROCEON_OLD_ID=y
# CONFIG_CPU_ICACHE_DISABLE is not set
CONFIG_CPU_PABRT_LEGACY=y
CONFIG_CPU_TLB_FEROCEON=y
CONFIG_CPU_USE_DOMAINS=y
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_DEV_MV_CESA=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_HW=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_DEBUG_USER is not set
CONFIG_DECOMPRESS_LZMA=y
CONFIG_DLCI=m
CONFIG_DLCI_MAX=8
CONFIG_DNOTIFY=y
# CONFIG_DSCC4 is not set
# CONFIG_FARSYNC is not set
CONFIG_FRAME_POINTER=y
CONFIG_GENERIC_ATOMIC64=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_GENERIC_CPU_DEVICES is not set
CONFIG_GENERIC_GPIO=y
CONFIG_GENERIC_IRQ_CHIP=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GPIOLIB=y
CONFIG_GPIO_SYSFS=y
# CONFIG_HAMRADIO is not set
CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_HAS_DMA=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAVE_AOUT=y
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_HAVE_ARCH_PFN_VALID=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_HAVE_GENERIC_HARDIRQS=y
CONFIG_HAVE_IDE=y
CONFIG_HAVE_IRQ_WORK=y
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_HAVE_MEMBLOCK=y
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_PERF_EVENTS=y
CONFIG_HAVE_PROC_CPU=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_SCHED_CLOCK=y
CONFIG_HAVE_SPARSE_IRQ=y
CONFIG_HDLC=m
CONFIG_HDLC_CISCO=m
CONFIG_HDLC_FR=m
CONFIG_HDLC_PPP=m
CONFIG_HDLC_RAW=m
CONFIG_HWMON=y
# CONFIG_HWMON_DEBUG_CHIP is not set
CONFIG_HW_RANDOM=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_MV64XXX=y
# CONFIG_I2C_PXA_PCI is not set
CONFIG_INET_LRO=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
CONFIG_KTIME_SCALAR=y
CONFIG_LEDS_GPIO=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_MACH_BIGDISK is not set
# CONFIG_MACH_D2NET is not set
# CONFIG_MACH_DB88F5281 is not set
CONFIG_MACH_DNS323=y
CONFIG_MACH_DT2=y
# CONFIG_MACH_EDMINI_V2 is not set
# CONFIG_MACH_KUROBOX_PRO is not set
# CONFIG_MACH_LINKSTATION_LSCHL is not set
# CONFIG_MACH_LINKSTATION_LS_HGL is not set
# CONFIG_MACH_LINKSTATION_MINI is not set
# CONFIG_MACH_LINKSTATION_PRO is not set
# CONFIG_MACH_MSS2 is not set
# CONFIG_MACH_MV2120 is not set
# CONFIG_MACH_NET2BIG is not set
# CONFIG_MACH_RD88F5181L_FXO is not set
# CONFIG_MACH_RD88F5181L_GE is not set
# CONFIG_MACH_RD88F5182 is not set
# CONFIG_MACH_RD88F6183AP_GE is not set
# CONFIG_MACH_TERASTATION_PRO2 is not set
# CONFIG_MACH_TS209 is not set
# CONFIG_MACH_TS409 is not set
# CONFIG_MACH_TS78XX is not set
CONFIG_MACH_WNR854T=y
CONFIG_MACH_WRT350N_V2=y
CONFIG_MDIO_BOARDINFO=y
# CONFIG_MLX4_CORE is not set
CONFIG_MTD_PHYSMAP=y
CONFIG_MV643XX_ETH=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_NEED_PER_CPU_KM=y
CONFIG_NET_DSA=y
# CONFIG_NET_DSA_MV88E6060 is not set
CONFIG_NET_DSA_MV88E6131=y
CONFIG_NET_DSA_MV88E6XXX=y
CONFIG_NET_DSA_MV88E6XXX_NEED_PPU=y
CONFIG_NET_DSA_TAG_DSA=y
# CONFIG_NET_DSA_TAG_TRAILER is not set
# CONFIG_NET_VENDOR_3COM is not set
CONFIG_NLS=m
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_PATA_ARTOP=m
CONFIG_PCI=y
CONFIG_PERF_USE_VMALLOC=y
CONFIG_PHYLIB=y
CONFIG_PLAT_ORION=y
# CONFIG_PREEMPT_RCU is not set
# CONFIG_QUOTACTL is not set
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_ISL1208=y
CONFIG_SATA_PMP=y
CONFIG_SCSI=m
CONFIG_SCSI_MOD=m
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SENSORS_SCH56XX_COMMON is not set
CONFIG_SPLIT_PTLOCK_CPUS=999999
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
CONFIG_UID16=y
CONFIG_USB=m
CONFIG_USB_ARCH_HAS_XHCI=y
CONFIG_USB_COMMON=m
CONFIG_USB_EHCI_HCD=m
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_HCD=m
CONFIG_USB_SUPPORT=y
CONFIG_USB_UHCI_HCD=m
CONFIG_VECTORS_BASE=0xffff0000
# CONFIG_VFP is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_WAN=y
CONFIG_XZ_DEC=y
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZONE_DMA_FLAG=0

@ -0,0 +1,47 @@
CONFIG_ATA=y
CONFIG_ATAGS_PROC=y
CONFIG_BLK_DEV_DM=y
CONFIG_BLK_DEV_MD=y
CONFIG_BLK_DEV_SD=y
CONFIG_CMDLINE="root=/dev/mtdblock3 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200"
CONFIG_CRC16=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_PCOMP2=y
CONFIG_DM_CRYPT=y
CONFIG_DM_MIRROR=y
CONFIG_DM_SNAPSHOT=y
CONFIG_EXPORTFS=y
CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y
CONFIG_EXT4_FS=y
CONFIG_FS_MBCACHE=y
CONFIG_GPIO_DEVICE=y
CONFIG_INPUT=y
CONFIG_INPUT_EVDEV=y
CONFIG_INPUT_KEYBOARD=y
CONFIG_JBD=y
CONFIG_JBD2=y
CONFIG_KEXEC=y
CONFIG_KEYBOARD_GPIO=y
CONFIG_MD=y
CONFIG_MD_AUTODETECT=y
CONFIG_MD_LINEAR=y
# CONFIG_MD_MULTIPATH is not set
CONFIG_MD_RAID0=y
CONFIG_MD_RAID1=y
# CONFIG_MD_RAID10 is not set
# CONFIG_MD_RAID456 is not set
CONFIG_NLS=y
CONFIG_RTC_DRV_M41T80=y
CONFIG_RTC_DRV_M41T80_WDT=y
CONFIG_SATA_MV=y
CONFIG_SCSI=y
CONFIG_SCSI_MOD=y
CONFIG_SENSORS_G760A=y
CONFIG_SENSORS_LM75=y
# CONFIG_USB_SUPPORT is not set
CONFIG_XFS_FS=y

@ -0,0 +1,28 @@
CONFIG_ATA=y
CONFIG_BLK_DEV_DM=y
CONFIG_BLK_DEV_MD=y
CONFIG_BLK_DEV_SD=y
CONFIG_CRC16=y
# CONFIG_DM_CRYPT is not set
# CONFIG_DM_MIRROR is not set
# CONFIG_DM_SNAPSHOT is not set
CONFIG_EXT4_FS=y
CONFIG_FS_MBCACHE=y
CONFIG_JBD2=y
CONFIG_MD=y
CONFIG_MD_AUTODETECT=y
CONFIG_MD_LINEAR=y
# CONFIG_MD_MULTIPATH is not set
CONFIG_MD_RAID0=y
CONFIG_MD_RAID1=y
# CONFIG_MD_RAID10 is not set
# CONFIG_MD_RAID456 is not set
CONFIG_NLS=y
CONFIG_SATA_MV=y
CONFIG_SCSI=y
CONFIG_SCSI_MOD=y
CONFIG_USB=y
CONFIG_USB_COMMON=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
CONFIG_USB_STORAGE=y

@ -0,0 +1,32 @@
--- a/arch/arm/mach-orion5x/wrt350n-v2-setup.c
+++ b/arch/arm/mach-orion5x/wrt350n-v2-setup.c
@@ -134,11 +134,11 @@ static struct mtd_partition wrt350n_v2_n
{
.name = "kernel",
.offset = 0x00000000,
- .size = 0x00760000,
+ .size = 0x00100000, // change to kernel mtd size here (1/3)
}, {
.name = "rootfs",
- .offset = 0x001a0000,
- .size = 0x005c0000,
+ .offset = 0x00100000, // change to kernel mtd size here (2/3)
+ .size = 0x00650000, // adopt to kernel mtd size here (3/3) = 0x00750000 - <kernel mtd size>
}, {
.name = "lang",
.offset = 0x00760000,
@@ -151,6 +151,14 @@ static struct mtd_partition wrt350n_v2_n
.name = "u-boot",
.offset = 0x007c0000,
.size = 0x00040000,
+ }, {
+ .name = "eRcOmM_do_not_touch",
+ .offset = 0x00750000,
+ .size = 0x00010000, // erasesize
+ }, {
+ .name = "image", // for sysupgrade
+ .offset = 0x00000000,
+ .size = 0x00750000,
},
};

@ -0,0 +1,13 @@
--- a/arch/arm/mach-orion5x/wnr854t-setup.c
+++ b/arch/arm/mach-orion5x/wnr854t-setup.c
@@ -66,6 +66,10 @@ static struct mtd_partition wnr854t_nor_
.name = "uboot",
.offset = 0x00760000,
.size = 0x00040000,
+ }, {
+ .name = "image", // for sysupgrade
+ .offset = 0x00000000,
+ .size = 0x00760000,
},
};

@ -0,0 +1,26 @@
--- a/arch/arm/mach-orion5x/Kconfig
+++ b/arch/arm/mach-orion5x/Kconfig
@@ -16,6 +16,13 @@ config MACH_RD88F5182
Say 'Y' here if you want your kernel to support the
Marvell Orion-NAS (88F5182) RD2
+config MACH_DT2
+ bool "Freecom DataTank Gateway"
+ select I2C_BOARDINFO
+ help
+ Say 'Y' here if you want your kernel to support the
+ Freecom DataTank Gateway
+
config MACH_KUROBOX_PRO
bool "KuroBox Pro"
select I2C_BOARDINFO
--- a/arch/arm/mach-orion5x/Makefile
+++ b/arch/arm/mach-orion5x/Makefile
@@ -18,6 +18,7 @@ obj-$(CONFIG_MACH_BIGDISK) += d2net-setu
obj-$(CONFIG_MACH_NET2BIG) += net2big-setup.o
obj-$(CONFIG_MACH_MSS2) += mss2-setup.o
obj-$(CONFIG_MACH_WNR854T) += wnr854t-setup.o
+obj-$(CONFIG_MACH_DT2) += dt2-setup.o
obj-$(CONFIG_MACH_RD88F5181L_GE) += rd88f5181l-ge-setup.o
obj-$(CONFIG_MACH_RD88F5181L_FXO) += rd88f5181l-fxo-setup.o
obj-$(CONFIG_MACH_RD88F6183AP_GE) += rd88f6183ap-ge-setup.o

@ -0,0 +1,30 @@
--- a/arch/arm/mach-orion5x/dns323-setup.c
+++ b/arch/arm/mach-orion5x/dns323-setup.c
@@ -113,6 +113,13 @@ subsys_initcall(dns323_pci_init);
* 0x00020000-0x001a0000 : "Linux Kernel"
* 0x001a0000-0x007d0000 : "File System"
* 0x007d0000-0x00800000 : "u-boot"
+ *
+ * Layout as used by OpenWrt
+ * 0x00000000-0x00010000 : "MTD1"
+ * 0x00010000-0x00020000 : "MTD2"
+ * 0x00020000-0x001a0000 : "kernel"
+ * 0x001a0000-0x007d0000 : "rootfs"
+ * 0x007d0000-0x00800000 : "u-boot"
*/
#define DNS323_NOR_BOOT_BASE 0xf4000000
@@ -128,11 +135,11 @@ static struct mtd_partition dns323_parti
.size = 0x00010000,
.offset = 0x00010000,
}, {
- .name = "Linux Kernel",
+ .name = "kernel",
.size = 0x00180000,
.offset = 0x00020000,
}, {
- .name = "File System",
+ .name = "rootfs",
.size = 0x00630000,
.offset = 0x001A0000,
}, {

@ -0,0 +1,31 @@
--- a/arch/arm/mach-orion5x/common.c
+++ b/arch/arm/mach-orion5x/common.c
@@ -192,7 +192,7 @@ void __init orion5x_init_early(void)
int orion5x_tclk;
-int __init orion5x_find_tclk(void)
+static __init int orion5x_find_tclk(void)
{
u32 dev, rev;
@@ -204,7 +204,7 @@ int __init orion5x_find_tclk(void)
return 166666667;
}
-static void orion5x_timer_init(void)
+static __init void orion5x_timer_init(void)
{
orion5x_tclk = orion5x_find_tclk();
--- a/arch/arm/mach-orion5x/addr-map.c
+++ b/arch/arm/mach-orion5x/addr-map.c
@@ -76,7 +76,7 @@ static int __init cpu_win_can_remap(cons
/*
* Description of the windows needed by the platform code
*/
-static struct __initdata orion_addr_map_cfg addr_map_cfg = {
+static struct orion_addr_map_cfg addr_map_cfg __initdata = {
.num_wins = 8,
.cpu_win_can_remap = cpu_win_can_remap,
.bridge_virt_base = ORION5X_BRIDGE_VIRT_BASE,

@ -0,0 +1,34 @@
--- a/arch/arm/mach-orion5x/dt2-setup.c
+++ b/arch/arm/mach-orion5x/dt2-setup.c
@@ -146,7 +146,7 @@ void __init dt2_pci_preinit(void)
}
}
-static int __init dt2_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+static int __init dt2_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
{
int irq;
@@ -383,8 +383,7 @@ __tagtable(ATAG_MV_UBOOT, parse_tag_dt2_
*
* Vanilla kernel should use "tag_fixup_mem32" function.
*/
-void __init openwrt_fixup(struct machine_desc *mdesc, struct tag *t,
- char **from, struct meminfo *meminfo)
+void __init openwrt_fixup(struct tag *t, char **from, struct meminfo *meminfo)
{
char *p = NULL;
static char openwrt_init_tag[] __initdata = " init=/etc/preinit";
@@ -437,10 +436,11 @@ void __init openwrt_fixup(struct machine
/* Warning: Freecom uses their own custom bootloader with mach-type (=1500) */
MACHINE_START(DT2, "Freecom DataTank Gateway")
/* Maintainer: Zintis Petersons <Zintis.Petersons@abcsolutions.lv> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = dt2_init,
.map_io = orion5x_map_io,
.init_irq = orion5x_init_irq,
.timer = &orion5x_timer,
.fixup = openwrt_fixup, //tag_fixup_mem32,
+ .restart = orion5x_restart,
MACHINE_END
Loading…
Cancel
Save