hsist
/
freifunkist-firmware
6
1
Fork 0
Code Issues Pull Requests Releases Wiki Activity

add support for board named RTA770W

Browse Source 
Actually this board is the very same as the rta770bw,
where the additional 'b' within the name just
indicates 'Annex B'. The ADSL Modem itself is able
to handle both, Annex A as well as Annex B -
the loaded firmware makes the only difference

SVN-Revision: 35500
master
Mirko Vogt 12 years ago
parent dc2ba40af3
commit f460388ce2
4 changed files with 215 additions and 1 deletions
Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL
Show Stats Download Patch File Download Diff File
  1. 3
      target/linux/brcm63xx/base-files/etc/uci-defaults/02_network
  2. 71
      target/linux/brcm63xx/patches-3.6/556-board_rta770w.patch
  3. 71
      target/linux/brcm63xx/patches-3.7/556-board_rta770w.patch
  4. 71
      target/linux/brcm63xx/patches-3.8/556-board_rta770w.patch

3
target/linux/brcm63xx/base-files/etc/uci-defaults/02_network
Unescape View File

@ -14,6 +14,8 @@ ucidef_set_interface_loopback
case "$board_name" in
RTA770BW |\
RTA770W |\
96348W3 |\
96358-502V |\
SPW500V)
@ -31,7 +33,6 @@ CT6373-1 |\
D-4P-W |\
"F@ST2604" |\
RTA1320_16M |\
RTA770BW |\
V2110)
ucidef_set_interface_lan "eth0"
ucidef_add_switch "eth0" "1" "1"

71
target/linux/brcm63xx/patches-3.6/556-board_rta770w.patch
Unescape View File

@ -0,0 +1,71 @@
--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
@@ -796,6 +796,60 @@
},
},
};
+
+// Actually this board is the very same as the rta770bw,
+// where the additional 'b' within the name just
+// just indicates 'Annex B'. The ADSL Modem itself is able
+// to handle both Annex A as well as Annex B -
+// the loaded firmware makes the only difference
+static struct board_info __initdata board_rta770w = {
+ .name = "RTA770W",
+ .expected_cpu_id = 0x6345,
+
+ .has_uart0 = 1,
+
+ .has_enet0 = 1,
+
+ .enet0 = {
+ .has_phy = 1,
+ .phy_id = 0,
+ .force_speed_100 = 1,
+ .force_duplex_full = 1,
+ },
+
+ .leds = {
+ {
+ .name = "RTA770W:green:usb",
+ .gpio = 7,
+ .active_low = 1,
+ },
+ {
+ .name = "RTA770W:green:adsl",
+ .gpio = 8,
+ },
+ {
+ .name = "RTA770W:green:diag",
+ .gpio = 10,
+ .active_low = 1,
+ },
+ {
+ .name = "RTA770W:green:wlan",
+ .gpio = 11,
+ .active_low = 1,
+ },
+ },
+
+ .buttons = {
+ {
+ .desc = "reset",
+ .gpio = 13,
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .active_low = 1,
+ .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
+ },
+ },
+};
#endif
/*
@@ -3750,6 +3804,7 @@
#ifdef CONFIG_BCM63XX_CPU_6345
&board_96345gw2,
&board_rta770bw,
+ &board_rta770w,
#endif
#ifdef CONFIG_BCM63XX_CPU_6348
&board_96348r,

71
target/linux/brcm63xx/patches-3.7/556-board_rta770w.patch
Unescape View File

@ -0,0 +1,71 @@
--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
@@ -796,6 +796,60 @@
},
},
};
+
+// Actually this board is the very same as the rta770bw,
+// where the additional 'b' within the name just
+// just indicates 'Annex B'. The ADSL Modem itself is able
+// to handle both Annex A as well as Annex B -
+// the loaded firmware makes the only difference
+static struct board_info __initdata board_rta770w = {
+ .name = "RTA770W",
+ .expected_cpu_id = 0x6345,
+
+ .has_uart0 = 1,
+
+ .has_enet0 = 1,
+
+ .enet0 = {
+ .has_phy = 1,
+ .phy_id = 0,
+ .force_speed_100 = 1,
+ .force_duplex_full = 1,
+ },
+
+ .leds = {
+ {
+ .name = "RTA770W:green:usb",
+ .gpio = 7,
+ .active_low = 1,
+ },
+ {
+ .name = "RTA770W:green:adsl",
+ .gpio = 8,
+ },
+ {
+ .name = "RTA770W:green:diag",
+ .gpio = 10,
+ .active_low = 1,
+ },
+ {
+ .name = "RTA770W:green:wlan",
+ .gpio = 11,
+ .active_low = 1,
+ },
+ },
+
+ .buttons = {
+ {
+ .desc = "reset",
+ .gpio = 13,
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .active_low = 1,
+ .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
+ },
+ },
+};
#endif
/*
@@ -3750,6 +3804,7 @@
#ifdef CONFIG_BCM63XX_CPU_6345
&board_96345gw2,
&board_rta770bw,
+ &board_rta770w,
#endif
#ifdef CONFIG_BCM63XX_CPU_6348
&board_96348r,

71
target/linux/brcm63xx/patches-3.8/556-board_rta770w.patch
Unescape View File

@ -0,0 +1,71 @@
--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
@@ -796,6 +796,60 @@
},
},
};
+
+// Actually this board is the very same as the rta770bw,
+// where the additional 'b' within the name just
+// just indicates 'Annex B'. The ADSL Modem itself is able
+// to handle both Annex A as well as Annex B -
+// the loaded firmware makes the only difference
+static struct board_info __initdata board_rta770w = {
+ .name = "RTA770W",
+ .expected_cpu_id = 0x6345,
+
+ .has_uart0 = 1,
+
+ .has_enet0 = 1,
+
+ .enet0 = {
+ .has_phy = 1,
+ .phy_id = 0,
+ .force_speed_100 = 1,
+ .force_duplex_full = 1,
+ },
+
+ .leds = {
+ {
+ .name = "RTA770W:green:usb",
+ .gpio = 7,
+ .active_low = 1,
+ },
+ {
+ .name = "RTA770W:green:adsl",
+ .gpio = 8,
+ },
+ {
+ .name = "RTA770W:green:diag",
+ .gpio = 10,
+ .active_low = 1,
+ },
+ {
+ .name = "RTA770W:green:wlan",
+ .gpio = 11,
+ .active_low = 1,
+ },
+ },
+
+ .buttons = {
+ {
+ .desc = "reset",
+ .gpio = 13,
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .active_low = 1,
+ .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
+ },
+ },
+};
#endif
/*
@@ -3750,6 +3804,7 @@
#ifdef CONFIG_BCM63XX_CPU_6345
&board_96345gw2,
&board_rta770bw,
+ &board_rta770w,
#endif
#ifdef CONFIG_BCM63XX_CPU_6348
&board_96348r,
Write Preview
Loading…
Cancel
Save