I-O DATA WN-AC1167GR is a 2.4/5 GHz band 11ac router, based on MediaTek MT7620A. Specification: - SoC : MediaTek MT7620A - RAM : DDR2 64 MB - Flash : SPI-NOR 8MB - WLAN : 2.4/5 GHz, 2T2R - 2.4 GHz: MT7620A (SoC) - 5 GHz : MT7612E - Ethernet: 10/100/1000 Mbps (ext. MT7530) - LED/key : 4x/3x (2x buttons, 1x slide-switch) - UART : through-hole on PCB - J2: TX, GND, RX, Vcc from SoC side - 115200n8 Flash instruction using factory image: 1. Boot WN-AC1167GR normaly 2. Access to "http://192.168.0.1/" and open firmware update page ("ファームウェア") 3. Select the OpenWrt factory image and click update ("更新") button to perform firmware update 4. Wait ~150 seconds to complete flashing Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>master
INAGAKI Hiroshi
6 years ago
committed by
Christian Lamparter
parent
dee8db441e
commit
f305ce5c35
@ -0,0 +1,216 @@ |
||||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT |
||||
/dts-v1/; |
||||
|
||||
#include "mt7620a.dtsi" |
||||
|
||||
#include <dt-bindings/gpio/gpio.h> |
||||
#include <dt-bindings/input/input.h> |
||||
|
||||
/ { |
||||
compatible = "iodata,wn-ac1167gr", "ralink,mt7620a-soc"; |
||||
model = "I-O DATA WN-AC1167GR"; |
||||
|
||||
aliases { |
||||
led-boot = &led_power; |
||||
led-failsafe = &led_power; |
||||
led-running = &led_power; |
||||
led-upgrade = &led_power; |
||||
}; |
||||
|
||||
memory@0 { |
||||
device_type = "memory"; |
||||
reg = <0x0 0x4000000>; |
||||
}; |
||||
|
||||
leds { |
||||
compatible = "gpio-leds"; |
||||
|
||||
led_power: power { |
||||
label = "wn-ac1167gr:green:power"; |
||||
gpios = <&gpio0 7 GPIO_ACTIVE_LOW>; |
||||
default-state = "on"; |
||||
}; |
||||
|
||||
wlan2g { |
||||
label = "wn-ac1167gr:green:wlan2g"; |
||||
gpios = <&gpio0 10 GPIO_ACTIVE_LOW>; |
||||
}; |
||||
|
||||
notification { |
||||
label = "wn-ac1167gr:green:notification"; |
||||
gpios = <&gpio0 11 GPIO_ACTIVE_LOW>; |
||||
}; |
||||
|
||||
wlan5g { |
||||
label = "wn-ac1167gr:green:wlan5g"; |
||||
gpios = <&gpio0 14 GPIO_ACTIVE_LOW>; |
||||
}; |
||||
}; |
||||
|
||||
keys { |
||||
compatible = "gpio-keys-polled"; |
||||
poll-interval = <20>; |
||||
|
||||
wps { |
||||
label = "wps"; |
||||
gpios = <&gpio0 1 GPIO_ACTIVE_LOW>; |
||||
linux,code = <KEY_WPS_BUTTON>; |
||||
}; |
||||
|
||||
reset { |
||||
label = "reset"; |
||||
gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; |
||||
linux,code = <KEY_RESTART>; |
||||
}; |
||||
|
||||
auto { |
||||
label = "auto"; |
||||
gpios = <&gpio0 12 GPIO_ACTIVE_LOW>; |
||||
linux,code = <BTN_0>; |
||||
linux,input-type = <EV_SW>; |
||||
}; |
||||
}; |
||||
}; |
||||
|
||||
&spi0 { |
||||
status = "okay"; |
||||
|
||||
flash@0 { |
||||
compatible = "jedec,spi-nor"; |
||||
reg = <0>; |
||||
spi-max-frequency = <10000000>; |
||||
|
||||
partitions { |
||||
compatible = "fixed-partitions"; |
||||
#address-cells = <1>; |
||||
#size-cells = <1>; |
||||
|
||||
partition@0 { |
||||
label = "u-boot"; |
||||
reg = <0x0 0x30000>; |
||||
read-only; |
||||
}; |
||||
|
||||
partition@30000 { |
||||
label = "u-boot-env"; |
||||
reg = <0x30000 0x10000>; |
||||
read-only; |
||||
}; |
||||
|
||||
Factory: partition@40000 { |
||||
label = "Factory"; |
||||
reg = <0x40000 0x8000>; |
||||
read-only; |
||||
}; |
||||
|
||||
iNIC_rf: partition@48000 { |
||||
label = "iNIC_rf"; |
||||
reg = <0x48000 0x8000>; |
||||
read-only; |
||||
}; |
||||
|
||||
partition@50000 { |
||||
label = "NoUsed"; |
||||
reg = <0x50000 0x20000>; |
||||
read-only; |
||||
}; |
||||
|
||||
partition@70000 { |
||||
compatible = "denx,uimage"; |
||||
label = "firmware"; |
||||
reg = <0x70000 0x6b4000>; |
||||
}; |
||||
|
||||
partition@724000 { |
||||
label = "manufacture"; |
||||
reg = <0x724000 0x8c000>; |
||||
read-only; |
||||
}; |
||||
|
||||
partition@7b0000 { |
||||
label = "backup"; |
||||
reg = <0x7b0000 0x10000>; |
||||
read-only; |
||||
}; |
||||
|
||||
partition@7c0000 { |
||||
label = "storage"; |
||||
reg = <0x7c0000 0x40000>; |
||||
read-only; |
||||
}; |
||||
}; |
||||
}; |
||||
}; |
||||
|
||||
ðernet { |
||||
pinctrl-names = "default"; |
||||
pinctrl-0 = <&rgmii1_pins &mdio_pins>; |
||||
mtd-mac-address = <&Factory 0x4>; |
||||
|
||||
port@5 { |
||||
status = "okay"; |
||||
mediatek,fixed-link = <1000 1 1 1>; |
||||
phy-mode = "rgmii"; |
||||
}; |
||||
|
||||
mdio-bus { |
||||
#address-cells = <1>; |
||||
#size-cells = <0>; |
||||
status = "okay"; |
||||
|
||||
ethernet-phy@0 { |
||||
reg = <0>; |
||||
phy-mode = "rgmii"; |
||||
}; |
||||
|
||||
ethernet-phy@1 { |
||||
reg = <1>; |
||||
phy-mode = "rgmii"; |
||||
}; |
||||
|
||||
ethernet-phy@2 { |
||||
reg = <2>; |
||||
phy-mode = "rgmii"; |
||||
}; |
||||
|
||||
ethernet-phy@3 { |
||||
reg = <3>; |
||||
phy-mode = "rgmii"; |
||||
}; |
||||
|
||||
ethernet-phy@4 { |
||||
reg = <4>; |
||||
phy-mode = "rgmii"; |
||||
}; |
||||
|
||||
ethernet-phy@1f { |
||||
reg = <0x1f>; |
||||
phy-mode = "rgmii"; |
||||
}; |
||||
}; |
||||
}; |
||||
|
||||
&pinctrl { |
||||
state_default: pinctrl0 { |
||||
gpio { |
||||
ralink,group = "i2c", "uartf"; |
||||
ralink,function = "gpio"; |
||||
}; |
||||
}; |
||||
}; |
||||
|
||||
&pcie { |
||||
status = "okay"; |
||||
}; |
||||
|
||||
&pcie0 { |
||||
wifi@0,0 { |
||||
reg = <0x0000 0 0 0 0>; |
||||
mediatek,mtd-eeprom = <&iNIC_rf 0x0>; |
||||
ieee80211-freq-limit = <5000000 6000000>; |
||||
}; |
||||
}; |
||||
|
||||
&wmac { |
||||
ralink,mtd-eeprom = <&Factory 0x0>; |
||||
}; |
||||
Loading…
Reference in new issue