@ -3,13 +3,13 @@
@@ -25,6 +25,9 @@ config TARGET_LSXL
config TARGET_POGO_E02
bool "pogo_e02 Board"
+config TARGET_POGOPLUGV4
+ bool "Pogoplug V4 Board"
+
config TARGET_DNS325
bool "dns325 Board"
@@ -77,6 +80,7 @@ source "board/Marvell/guruplug/Kconfig"
source "board/Marvell/sheevaplug/Kconfig"
source "board/buffalo/lsxl/Kconfig"
@ -18,49 +18,15 @@
source "board/d-link/dns325/Kconfig"
source "board/iomega/iconnect/Kconfig"
source "board/keymile/km_arm/Kconfig"
--- a/arch/arm/mach-kirkwood/include/mach/config.h
+++ b/arch/arm/mach-kirkwood/include/mach/config.h
@@ -77,6 +77,7 @@
* Ethernet Driver configuration
*/
#ifdef CONFIG_CMD_NET
+#define CONFIG_FEATURE_COMMAND_EDITING
#define CONFIG_NETCONSOLE /* include NetConsole support */
#define CONFIG_MII /* expose smi ove miiphy interface */
#define CONFIG_MVGBE /* Enable Marvell Gbe Controller Driver */
@@ -110,6 +111,7 @@
#define CONFIG_SYS_ATA_STRIDE 4
/* Controller supports 48-bits LBA addressing */
#define CONFIG_LBA48
+#define CONFIG_SYS_64BIT_LBA
/* CONFIG_IDE requires some #defines for ATA registers */
#define CONFIG_SYS_IDE_MAXBUS 2
#define CONFIG_SYS_IDE_MAXDEVICE 2
@@ -134,4 +136,15 @@
#define CONFIG_SYS_TIMER_COUNTER (MVEBU_TIMER_BASE + 0x14)
#define CONFIG_SYS_TIMER_RATE CONFIG_SYS_TCLK
+/*
+ * Boot option
+ */
+#define CONFIG_CMD_BOOTZ
+
+/*
+ * GPIO
+ */
+#define CONFIG_CMD_GPIO
+#define CONFIG_KIRKWOOD_GPIO
+
#endif /* _KW_CONFIG_H */
--- a/arch/arm/mach-kirkwood/include/mach/kw88f6192.h
+++ b/arch/arm/mach-kirkwood/include/mach/kw88f6192.h
@@ -16,6 +16,6 @@
#define KW_REGS_PHY_BASE KW88F6192_REGS_PHYS_BASE
/* TCLK Core Clock defination */
-#define CONFIG_SYS_TCLK 166000000 /* 166MHz */
+#define CONFIG_SYS_TCLK 166666667 /* 166MHz */
#endif /* _CONFIG_KW88F6192_H */
--- a/arch/arm/mach-kirkwood/include/mach/mpp.h
+++ b/arch/arm/mach-kirkwood/include/mach/mpp.h
@ -69,25 +35,14 @@
#define MPP33_TDM_DTX MPP( 33, 0x2, 0, 1, 0, 0, 1, 1 )
#define MPP33_GE1_13 MPP( 33, 0x3, 0, 0, 0, 1, 1, 1 )
+#define MPP33_SATA1_ACTn MPP( 33, 0x5, 0, 1, 0, 1, 1, 1 )
#define MPP34_GPIO MPP( 34, 0x0, 1, 1, 0, 1, 1, 1 )
#define MPP34_TDM_SPI_CS1 MPP( 34, 0x2, 0, 1, 0, 0, 1, 1 )
#define MPP34_GE1_14 MPP( 34, 0x3, 0, 0, 0, 1, 1, 1 )
+#define MPP34_SATA1_ACTn MPP( 34, 0x5, 0, 1, 0, 1, 1, 1 )
#define MPP35_GPIO MPP( 35, 0x0, 1, 1, 1, 1, 1, 1 )
#define MPP35_TDM_CH0_TX_QL MPP( 35, 0x2, 0, 1, 0, 0, 1, 1 )
--- a/arch/arm/mach-mvebu/include/mach/soc.h
+++ b/arch/arm/mach-mvebu/include/mach/soc.h
@@ -18,6 +18,8 @@
#define SOC_88F6810_ID 0x6810
#define SOC_88F6820_ID 0x6820
#define SOC_88F6828_ID 0x6828
+#define SOC_88F6192_ID 0x6192
+#define SOC_88F6702_ID 0x6702
/* A375 revisions */
#define MV_88F67XX_A0_ID 0x3
--- /dev/null
+++ b/board/cloudengines/pogoplugv4/Kconfig
@@ -0,0 +1,12 @@
@ -577,9 +532,10 @@
+#endif /* __POGOPLUGV4_H */
--- /dev/null
+++ b/configs/pogoplugv4_defconfig
@@ -0,0 +1,35 @@
@@ -0,0 +1,40 @@
+CONFIG_ARM=y
+CONFIG_KIRKWOOD=y
+CONFIG_SYS_TEXT_BASE=0x600000
+CONFIG_TARGET_POGOPLUGV4=y
+CONFIG_SYS_PROMPT="pogoplugv4> "
+CONFIG_IDENT_STRING="\nPogoplug V4"
@ -589,6 +545,7 @@
+CONFIG_SYS_NS16550=y
+CONFIG_CMD_FDT=y
+CONFIG_OF_LIBFDT=y
+CONFIG_OF_BOOTZ=y
+CONFIG_CMD_SETEXPR=y
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_MII=y
@ -601,10 +558,12 @@
+CONFIG_CMD_EXT4=y
+CONFIG_CMD_FAT=y
+CONFIG_CMD_JFFS2=y
+CONFIG_MTDPARTS_DEFAULT="mtdparts=orion_nand:0x1c0000(uboot),0x40000(uboot_env),0x7e00000(ubi)"
+CONFIG_CMD_MTDPARTS=y
+CONFIG_CMD_ENV=y
+CONFIG_CMD_NAND=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_GPIO=y
+CONFIG_EFI_PARTITION=y
+CONFIG_ENV_IS_IN_NAND=y
+CONFIG_CMD_UBI=y
@ -613,6 +572,7 @@
+CONFIG_USB_STORAGE=y
+CONFIG_LZMA=y
+CONFIG_LZO=y
+CONFIG_SYS_LONGHELP=y
--- a/drivers/gpio/kw_gpio.c
+++ b/drivers/gpio/kw_gpio.c
@@ -148,3 +148,36 @@ void kw_gpio_set_blink(unsigned pin, int
@ -659,7 +619,7 @@
obj-$(CONFIG_MMC_SDHCI_XENON) += xenon_sdhci.o
obj-$(CONFIG_MMC_SDHCI_ZYNQ) += zynq_sdhci.o
+obj-$(CONFIG_KIRKWOOD_MMC) += kirkwood_mmc.o
obj-$(CONFIG_MMC_SUNXI) += sunxi_mmc.o
obj-$(CONFIG_MMC_UNIPHIER) += uniphier-sd.o
--- /dev/null
@ -1149,26 +1109,20 @@
+}
--- a/include/configs/mv-common.h
+++ b/include/configs/mv-common.h
@@ -130,4 +130,16 @@
@@ -117,4 +117,10 @@
#define CONFIG_MTD_PARTITIONS
#endif
+/*
+ * Kirkwood MMC
+ */
+#if defined(CONFIG_KIRKWOOD) && defined(CONFIG_CMD_MMC)
+#define CONFIG_SYS_MMC_BASE KW_SDIO_BASE
+#endif /* defined(CONFIG_KIRKWOOD) && defined(CONFIG_CMD_MMC) */
+
+/*
+ * GPIO command for all Kirkwood boxes
+ */
+#define CONFIG_CMD_GPIO
+
#endif /* _MV_COMMON_H */
--- /dev/null
+++ b/include/configs/pogoplugv4.h
@@ -0,0 +1,13 2 @@
@@ -0,0 +1,129 @@
+/*
+ * Copyright (C) 2014-2016 bodhi <mibodhi@gmail.com>
+ * Based on
@ -1214,11 +1168,14 @@
+#define CONFIG_KW88F6192 /* SOC Name */
+#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
+
+#define CONFIG_FEATURE_COMMAND_EDITING
+#define CONFIG_SYS_64BIT_LBA
+
+/*
+ * Commands configuration
+ */
+
+#define CONFIG_SYS_LONGHELP
+#define CONFIG_KIRKWOOD_GPIO
+#define CONFIG_PREBOOT
+
+/*
@ -1252,16 +1209,10 @@
+ "ubi read 0x800000 kernel; " \
+ "bootm 0x800000"
+
+#define CONFIG_MTDPARTS \
+ "mtdparts=orion_nand:" \
+ "0x1c0000(uboot)," \
+ "0x40000(uboot_env)," \
+ "0x7e00000(ubi)\0"
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "console=console=ttyS0,115200\0" \
+ "mtdids=nand0=orion_nand\0" \
+ "mtdparts="CONFIG_MTDPARTS \
+ "mtdparts="CONFIG_MTDPARTS_DEFAULT \
+ "bootargs_root=\0"
+
+/*