brcm63xx: add initial support for BCM963268BU_P300 reference board

Only netboot tested, so no images or now.
GbE ports are only working in FE mode, and leds do not work.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 39679
master
Jonas Gorski 11 years ago
parent f6c4b1eb29
commit ece12908a8
  1. 6
      target/linux/brcm63xx/base-files/etc/uci-defaults/02_network
  2. 142
      target/linux/brcm63xx/patches-3.10/560-board_963268gu_p300.patch
  3. 4
      target/linux/brcm63xx/patches-3.10/801-ssb_export_fallback_sprom.patch

@ -109,6 +109,12 @@ VW6339GU)
ucidef_add_switch_vlan "switch0" "2" "4 8t"
;;
963268BU_P300)
ucidef_set_interface_lan "eth0.1"
ucidef_add_switch "switch0" "1" "1"
ucidef_add_switch_vlan "switch0" "1" "0 3 4 5 6 7 8t"
;;
*)
ucidef_set_interfaces_lan_wan "eth1" "eth0"
;;

@ -0,0 +1,142 @@
--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
@@ -4475,6 +4475,131 @@ static struct board_info __initdata boar
* known 63268/63269 boards
*/
#ifdef CONFIG_BCM63XX_CPU_63268
+static struct board_info __initdata board_963268bu_p300 = {
+ .name = "963268BU_P300",
+ .expected_cpu_id = 0x63268,
+
+ .has_uart0 = 1,
+
+ .has_ehci0 = 1,
+ .has_ohci0 = 1,
+ .num_usbh_ports = 1,
+
+ .has_usbd = 1,
+
+ .usbd = {
+ .use_fullspeed = 0,
+ .port_no = 0,
+ },
+
+ .has_enetsw = 1,
+
+ .enetsw = {
+ .used_ports = {
+ [0] = {
+ .used = 1,
+ .phy_id = 17,
+ .name = "FE1",
+ },
+
+ [3] = {
+ .used = 1,
+ .phy_id = 4,
+ .name = "GbE2",
+ },
+
+ [4] = {
+ .used = 1,
+ .phy_id = 0,
+ .name = "GbE3",
+ },
+
+ [5] = {
+ .used = 1,
+ .phy_id = 1,
+ .name = "GbE1",
+ },
+
+ [6] = {
+ .used = 1,
+ .phy_id = 24,
+ .name = "GbE4",
+ },
+
+ [7] = {
+ .used = 1,
+ .phy_id = 25,
+ .name = "GbE5",
+ },
+ },
+ },
+
+ .leds = {
+ {
+ .name = "963268BU_P300:green:power",
+ .gpio = 20,
+ .active_low = 1,
+ },
+ {
+ .name = "963268BU_P300:red:power",
+ .gpio = 21,
+ .active_low = 1,
+ },
+ {
+ .name = "963268BU_P300:green:internet",
+ .gpio = 8,
+ .active_low = 1,
+ },
+ {
+ .name = "963268BU_P300:red:internet",
+ .gpio = 2,
+ .active_low = 1,
+ },
+ {
+ .name = "963268BU_P300:green:adsl",
+ .gpio = 3,
+ .active_low = 1,
+ },
+ {
+ .name = "963268BU_P300:green:wps",
+ .gpio = 7,
+ .active_low = 1,
+ },
+ {
+ .name = "963268BU_P300:green:voip1",
+ .gpio = 4,
+ .active_low = 1,
+ },
+ {
+ .name = "963268BU_P300:green:voip2",
+ .gpio = 5,
+ .active_low = 1,
+ },
+ {
+ .name = "963268BU_P300:green:pots",
+ .gpio = 6,
+ .active_low = 1,
+ },
+ },
+
+ .buttons = {
+ {
+ .desc = "reset",
+ .gpio = 32,
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
+ },
+ {
+ .desc = "wps",
+ .gpio = 33,
+ .type = EV_KEY,
+ .code = KEY_WPS_BUTTON,
+ .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
+ },
+ },
+};
+
static struct board_info __initdata board_963269bhr = {
.name = "963269BHR",
.expected_cpu_id = 0x63268,
@@ -4729,6 +4854,7 @@ static const struct board_info __initcon
&board_96368mvngr,
#endif
#ifdef CONFIG_BCM63XX_CPU_63268
+ &board_963268bu_p300,
&board_963269bhr,
&board_vw6339gu,
#endif

@ -8,7 +8,7 @@
#include <linux/spi/spi.h>
#include <linux/spi/spi_gpio.h>
#include <linux/spi/74x164.h>
@@ -4739,7 +4740,7 @@ static const struct board_info __initcon
@@ -4865,7 +4866,7 @@ static const struct board_info __initcon
* bcm4318 WLAN work
*/
#ifdef CONFIG_SSB_PCIHOST
@ -17,7 +17,7 @@
.revision = 0x02,
.board_rev = 0x17,
.country_code = 0x0,
@@ -4759,6 +4760,7 @@ static struct ssb_sprom bcm63xx_sprom =
@@ -4885,6 +4886,7 @@ static struct ssb_sprom bcm63xx_sprom =
.boardflags_lo = 0x2848,
.boardflags_hi = 0x0000,
};

Loading…
Cancel
Save