enable IP175A support in the IP175C PHY driver (based on patch from jh in #6733)

SVN-Revision: 20551
master
Felix Fietkau 15 years ago
parent 16e22d2559
commit e4a6acf9b8
  1. 66
      target/linux/generic-2.6/files/drivers/net/phy/ip175c.c

@ -195,20 +195,23 @@ static const struct register_mappings IP175A = {
.ADD_TAG_REG = {0,23},
.REMOVE_TAG_REG = {0,23},
.ADD_TAG_BIT = {11,12,13,14,15,1,-1,-1,-1},
.REMOVE_TAG_BIT = {6,7,8,9,10,0,-1,-1,-1},
.ADD_TAG_BIT = {11,12,13,14,15,-1,-1,-1,-1},
.REMOVE_TAG_BIT = {6,7,8,9,10,-1,-1,-1,-1},
.SIMPLE_VLAN_REGISTERS = 1,
.SIMPLE_VLAN_REGISTERS = 0,
// Only programmable via. EEPROM
.VLAN_LOOKUP_REG = NOTSUPPORTED,// +N/2
// Register 19-21 documentation is missing/contradictory.
// For registers 19-21 ports need to be: even numbers to MSB, odd to LSB.
// This contradicts text for ROM registers, but follows logic of CoS bits.
.VLAN_LOOKUP_REG = {0,19},// +N/2
.VLAN_LOOKUP_REG_5 = NOTSUPPORTED,
.VLAN_LOOKUP_EVEN_BIT = {8,9,10,11,12,15,-1,-1,-1},
.VLAN_LOOKUP_ODD_BIT = {0,1,2,3,4,7,-1,-1,-1},
.VLAN_LOOKUP_EVEN_BIT = {8,9,10,11,12,-1,-1,-1,-1},
.VLAN_LOOKUP_ODD_BIT = {0,1,2,3,4,-1,-1,-1,-1},
.TAG_VLAN_MASK_REG = NOTSUPPORTED, // +N/2
.TAG_VLAN_MASK_EVEN_BIT = {0,1,2,3,4,5,-1,-1,-1},
.TAG_VLAN_MASK_ODD_BIT = {8,9,10,11,12,13,-1,-1,-1},
.TAG_VLAN_MASK_REG = NOTSUPPORTED, // +N/2,
.TAG_VLAN_MASK_EVEN_BIT = {-1,-1,-1,-1,-1,-1,-1,-1,-1},
.TAG_VLAN_MASK_ODD_BIT = {-1,-1,-1,-1,-1,-1,-1,-1,-1},
.RESET_VAL = -1,
.RESET_REG = NOTSUPPORTED,
@ -222,13 +225,14 @@ static const struct register_mappings IP175A = {
.NUMLAN_GROUPS_MAX = -1,
.NUMLAN_GROUPS_BIT = -1, // {0-2}
.NUM_PORTS = 6,
.CPU_PORT = 5,
.NUM_PORTS = 5,
.CPU_PORT = 4,
.MII_REGISTER_EN = {0, 12},
.MII_REGISTER_EN = {0, 18},
.MII_REGISTER_EN_BIT = 7,
};
struct ip175c_state {
struct switch_dev dev;
struct mii_bus *mii_bus;
@ -435,7 +439,7 @@ static int get_state(struct ip175c_state *state)
if (state->vlan_enabled == -1) {
// not sure how to get this...
state->vlan_enabled = (!state->remove_tag && !state->add_tag);
state->vlan_enabled = (state->remove_tag || state->add_tag);
}
if (REG_SUPP(state->regs->VLAN_LOOKUP_REG)) {
@ -829,12 +833,14 @@ static int ip175c_reset(struct switch_dev *dev)
err = getPhy(state, state->regs->MODE_REG);
}
/* reset switch ports */
for (i = 0; i < 5; i++) {
err = state->mii_bus->write(state->mii_bus, i,
MII_BMCR, BMCR_RESET);
if (err < 0)
return err;
if (REG_SUPP(state->regs->RESET_REG)) {
/* reset external phy ports, except on IP175A */
for (i = 0; i < state->regs->NUM_PORTS-1; i++) {
err = state->mii_bus->write(state->mii_bus, i,
MII_BMCR, BMCR_RESET);
if (err < 0)
return err;
}
}
return 0;
@ -1300,15 +1306,35 @@ static struct phy_driver ip175c_driver = {
.driver = { .owner = THIS_MODULE },
};
static struct phy_driver ip175a_driver = {
.name = "IC+ IP175A",
.phy_id = 0x02430c50,
.phy_id_mask = 0x0ffffff0,
.features = PHY_BASIC_FEATURES,
.probe = ip175c_probe,
.remove = ip175c_remove,
.config_init = ip175c_config_init,
.config_aneg = ip175c_config_aneg,
.read_status = ip175c_read_status,
.driver = { .owner = THIS_MODULE },
};
int __init ip175c_init(void)
{
int ret;
ret = phy_driver_register(&ip175a_driver);
if (ret < 0)
return ret;
return phy_driver_register(&ip175c_driver);
}
void __exit ip175c_exit(void)
{
phy_driver_unregister(&ip175c_driver);
phy_driver_unregister(&ip175a_driver);
}
MODULE_AUTHOR("Patrick Horn <patrick.horn@gmail.com>");

Loading…
Cancel
Save